skip to main content

Explore Research Products in the NSF-PAR

Title: Exploring the capabilities of electrical resistivity tomography to study subsea permafrost
Abstract. Sea level rise and coastal erosion have inundated large areas of Arctic permafrost. Submergence by warm and saline waters increases the rate of inundated permafrost thaw compared to sub-aerial thawing on land. Studying the contact between the unfrozen and frozen sediments below the seabed, also known as the ice-bearing permafrost table (IBPT), provides valuable information to understand the evolution of sub-aquatic permafrost, which is key to improving and understanding coastal erosion prediction models and potential greenhouse gas emissions. In this study, we use data from 2D electrical resistivity tomography (ERT) collected in the nearshore coastal zone of two Arctic regions that differ in their environmental conditions (e.g., seawater depth and resistivity) to image and study the subsea permafrost. The inversion of 2D ERT data sets is commonly performed using deterministic approaches that favor smoothed solutions, which are typically interpreted using a user-specified resistivity threshold to identify the IBPT position. In contrast, to target the IBPT position directly during inversion, we use a layer-based model parameterization and a global optimization approach to invert our ERT data. This approach results in ensembles of layered 2D model solutions, which we use to identify the IBPT and estimate the resistivity of the unfrozen and frozen sediments, including estimates of uncertainties. Additionally, we globally invert 1D synthetic resistivity data and perform sensitivity analyses to study, in a simpler way, the correlations and influences of our model parameters. The set of methods provided in this study may help to further exploit ERT data collected in such permafrost environments as well as for the design of future field experiments.  more » « less
Award ID(s):
1927553
NSF-PAR ID:
10377115
Author(s) / Creator(s):
; ; ; ; ;
Date Published:
Journal Name:
The Cryosphere
Volume:
16
Issue:
10
ISSN:
1994-0424
Page Range / eLocation ID:
4423 to 4445
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; ; ; ( , Journal of Environmental and Engineering Geophysics)
    null (Ed.)
    Surface-based 2D electrical resistivity tomography (ERT) surveys were used to characterize permafrost distribution at wetland sites on the alluvial plain north of the Tanana River, 20 km southwest of Fairbanks, Alaska, in June and September 2014. The sites were part of an ecologically-sensitive research area characterizing biogeochemical response of this region to warming and permafrost thaw, and the site contained landscape features characteristic of interior Alaska, including thermokarst bog, forested permafrost plateau, and a rich fen. The results show how vegetation reflects shallow (0–10 m depth) permafrost distribution. Additionally, we saw shallow (0–3 m depth) low resistivity areas in forested permafrost plateau potentially indicating the presence of increased unfrozen water content as a precursor to ground instability and thaw. Time-lapse study from June to September suggested a depth of seasonal influence extending several meters below the active layer, potentially as a result of changes in unfrozen water content. A comparison of several electrode geometries (dipole-dipole, extended dipole-dipole, Wenner-Schlumberger) showed that for depths of interest to our study (0–10 m) results were similar, but data acquisition time with dipole-dipole was the shortest, making it our preferred geometry. The results show the utility of ERT surveys to characterize permafrost distribution at these sites, and how vegetation reflects shallow permafrost distribution. These results are valuable information for ecologically sensitive areas where ground-truthing can cause excessive disturbance. ERT data can be used to characterize the exact subsurface geometry of permafrost such that over time an understanding of changing permafrost conditions can be made in great detail. Characterizing the depth of thaw and thermal influence from the surface in these areas also provides important information as an indication of the depth to which carbon storage and microbially-mediated carbon processing may be affected. 
    more » « less
  2. ; ; ; ; ; ; ; ; ; ( , Frontiers in earth science)
    Jones, Benjamin (Ed.)
    Permafrost sediments contain one of the largest reservoirs of organic carbon on Earth that is relatively stable when it remains frozen. As air temperatures increase, the shallow permafrost thaws which allows this organic matter to be converted into potent greenhouse gases such as methane (CH4) and carbon dioxide (CO2) through microbial processes. Along the Beaufort Sea coast in the vicinity of the Tuktoyaktuk Peninsula, Northwest Territories, Canada, warming air temperatures are causing the active layer above permafrost to deepen, and a number of active periglacial processes are causing rapid erosion of previously frozen permafrost. In this paper, we consider the biogeochemical consequences of these processes on the permafrost sediments found at Tuktoyaktuk Island. Our goals were to document the in situ carbon characteristics which can support microbial activity, and then consider rates of such activity if the permafrost material were to warm even further. Samples were collected from a 12mpermafrost core positioned on the top of the island adjacent to an eroding coastal bluff. Downcore CH4, total organic carbon and dissolved organic carbon (DOC) concentrations and stable carbon isotopes revealed variable in situ CH4 concentrations down core with a sub-surface peak just below the current active layer. The highest DOC concentrations were observed in the active layer. Controlled incubations of sediment from various depths were carried out from several depths anaerobically under thawed (5°C and 15°C) and under frozen (−20°C and −5°C) conditions. These incubations resulted in gross production rates of CH4 and CO2 that increased upon thawing, as expected, but also showed appreciable production rates under frozen conditions. This dataset presents the potential for sediments below the active layer to produce potent greenhouse gases, even under frozen conditions, which could be an important atmospheric source in the actively eroding coastal zone even prior to thawing. 
    more » « less
  3. ; ; ( , Kansas Agricultural Experiment Station Research Reports)
    Claypan soils cover approximately 10 million acres across several states in the central United States. The soils are characterized by a highly impermeable clay layer within the profile that impedes water flow and root growth. While some claypan soils can be productive, they must be carefully managed to avoid reductions to crop productivity due to root restrictions, water, and nutrient limitations. Clay soils are usually resistant to erosion but may exacerbate erosion of the silt-loam topsoil. Soil production potential is the capacity of soil to produce at a given level (yield per acre). The productive capacity is tied to soil characteristics, which can be highly variable within a field. In this project, we have used imagery analysis to study the aerial images and terrain of fields during different productive times of the year to identify where soil samples should be collected for more discrete analysis. Soil samples provide valuable information; however, the amount of data obtained from a relatively small area within a field does not provide sufficient information to delineate the subsurface characteristics. To address the limitations of sampling, we have also employed the use of yield maps collected from commercial yield monitors on production-scale combines and surface electrical conductivity measurements (Sassenrath and Kulesza, 2017). Soil conductivity is a measurement of how well a representative volume of soil conducts electricity. Soil conductivity is a function of the soil clay content, moisture content, and other measurable soil properties (Kitchen et al., 2003); as such, it has become a valuable tool for mapping in-field variability. The main advantage of a soil conductivity measurement is that the entire surface of a field can be imaged. The disadvantage of a soil conductivity measurement is that data are only collected near the surface (10 – 30 inches) and the measurements are relative measurements. This means that the conductivity mappers can identify changes in soil properties, but they cannot directly tell researchers what caused these changes. Electrical resistivity tomography (ERT) is a popular near-surface geophysical measurement for geophysical and engineering applications. The term “near-surface” generally means down to around 30 feet in the subsurface. Electrical resistivity is the reciprocal measurement of electrical conductivity; therefore, both systems measure differences in the same soil properties. ERT measurements are different than surface electrical conductivity measurements because ERT collects a “slice” of data into the subsurface, as opposed to only changes at the surface area. Relative measurements, similar to those collected in an electrical conductivity survey, are collected; however, in ERT studies the data are mathematically inverted to yield the true electrical resistivity of the soil with depth. This allows an interpretation of the changing soil properties with depth to reduce the required amount of sampling. A disadvantage of an ERT survey is that the data acquisition is stationary so mapping an entire field is not feasible. We have used a coupled process of imagery and terrain analysis, yield maps, and electrical conductivity measurements to guide the locations of ERT surveys in this project (Tucker-Kulesza et al. 2017). 
    more » « less
  4. ; ; ; ; ; ; ; ; ; ; et al ( , Frontiers in Earth Science)
    null (Ed.)
    Accelerating erosion of the Alaska Beaufort Sea coast is increasing inputs of organic matter from land to the Arctic Ocean, and improved estimates of organic matter stocks in eroding coastal permafrost are needed to assess their mobilization rates under contemporary conditions. We collected three permafrost cores (4.5–7.5 m long) along a geomorphic gradient near Drew Point, Alaska, where recent erosion rates average 17.2 m year −1 . Down-core patterns indicate that organic-rich soils and lacustrine sediments (12–45% total organic carbon; TOC) in the active layer and upper permafrost accumulated during the Holocene. Deeper permafrost (below 3 m elevation) mainly consists of Late Pleistocene marine sediments with lower organic matter content (∼1% TOC), lower C:N ratios, and higher δ 13 C values. Radiocarbon-based estimates of organic carbon accumulation rates were 11.3 ± 3.6 g TOC m −2  year −1 during the Holocene and 0.5 ± 0.1 g TOC m −2  year −1 during the Late Pleistocene (12–38 kyr BP). Within relict marine sediments, porewater salinities increased with depth. Elevated salinity near sea level (∼20–37 in thawed samples) inhibited freezing despite year-round temperatures below 0°C. We used organic matter stock estimates from the cores in combination with remote sensing time-series data to estimate carbon fluxes for a 9 km stretch of coastline near Drew Point. Erosional fluxes of TOC averaged 1,369 kg C m −1  year −1 during the 21st century (2002–2018), nearly doubling the average flux of the previous half-century (1955–2002). Our estimate of the 21st century erosional TOC flux year −1 from this 9 km coastline (12,318 metric tons C year −1 ) is similar to the annual TOC flux from the Kuparuk River, which drains a 8,107 km 2 area east of Drew Point and ranks as the third largest river on the North Slope of Alaska. Total nitrogen fluxes via coastal erosion at Drew Point were also quantified, and were similar to those from the Kuparuk River. This study emphasizes that coastal erosion represents a significant pathway for carbon and nitrogen trapped in permafrost to enter modern biogeochemical cycles, where it may fuel food webs and greenhouse gas emissions in the marine environment. 
    more » « less
  5. ; ; ; ; ; ; ; ; ; ; et al ( , Journal of Marine Science and Engineering)
    This paper presents the results of a community survey that was designed to better understand the effects of permafrost degradation and coastal erosion on civil infrastructure. Observations were collected from residents in four Arctic coastal communities: Point Lay, Wainwright, Utqiaġvik, and Kaktovik. All four communities are underlain by continuous ice-rich permafrost with varying degrees of degradation and coastal erosion. The types, locations, and periods of observed permafrost thaw and coastal erosion were elicited. Survey participants also reported the types of civil infrastructure being affected by permafrost degradation and coastal erosion and any damage to residential buildings. Most survey participants reported that coastal erosion has been occurring for a longer period than permafrost thaw. Surface water ponding, ground surface collapse, and differential ground settlement are the three types of changes in ground surface manifested by permafrost degradation that are most frequently reported by the participants, while houses are reported as the most affected type of infrastructure in the Arctic coastal communities. Wall cracking and house tilting are the most commonly reported types of residential building damage. The effects of permafrost degradation and coastal erosion on civil infrastructure vary between communities. Locations of observed permafrost degradation and coastal erosion collected from all survey participants in each community were stacked using heatmap data visualization. The heatmaps constructed using the community survey data are reasonably consistent with modeled data synthesized from the scientific literature. This study shows a useful approach to coproduce knowledge with Arctic residents to identify locations of permafrost thaw and coastal erosion at higher spatial resolution as well as the types of infrastructure damage of most concern to Arctic residents. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email