skip to main content


Title: Millimeter Wave and Free-Space-Optics for Future Dual-Connectivity 6DOF Mobile Multi-User VR Streaming
Dual-connectivity streaming is a key enabler of next generation six Degrees Of Freedom (6DOF) Virtual Reality (VR) scene immersion. Indeed, using conventional sub-6 GHz WiFi only allows to reliably stream a low-quality baseline representation of the VR content, while emerging high-frequency communication technologies allow to stream in parallel a high-quality user viewport-specific enhancement representation that synergistically integrates with the baseline representation, to deliver high-quality VR immersion. We investigate holistically as part of an entire future VR streaming system two such candidate emerging technologies, Free Space Optics (FSO) and millimeter-Wave (mmWave) that benefit from a large available spectrum to deliver unprecedented data rates. We analytically characterize the key components of the envisioned dual-connectivity 6DOF VR streaming system that integrates in addition edge computing and scalable 360° video tiling, and we formulate an optimization problem to maximize the immersion fidelity delivered by the system, given the WiFi and mmWave/FSO link rates, and the computing capabilities of the edge server and the users’ VR headsets. This optimization problem is mixed integer programming of high complexity and we formulate a geometric programming framework to compute the optimal solution at low complexity. We carry out simulation experiments to assess the performance of the proposed system using actual 6DOF navigation traces from multiple mobile VR users that we collected. Our results demonstrate that our system considerably advances the traditional state-of-the-art and enables streaming of 8K-120 frames-per-second (fps) 6DOF content at high fidelity.  more » « less
Award ID(s):
2032033 2032387
NSF-PAR ID:
10377596
Author(s) / Creator(s):
; ; ;
Date Published:
Journal Name:
ACM Transactions on Multimedia Computing, Communications, and Applications
ISSN:
1551-6857
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. null (Ed.)
    We investigate a novel communications system that integrates scalable multi-layer 360-degree video tiling, viewport-adaptive rate-distortion optimal resource allocation, and VR-centric edge computing and caching, to enable future high-quality untethered VR streaming. Our system comprises a collection of 5G small cells that can pool their communication, computing, and storage resources to collectively deliver scalable 360-degree video content to mobile VR clients at much higher quality. Our major contributions are rigorous design of multi-layer 360-degree tiling and related models of statistical user navigation, and analysis and optimization of edge-based multi-user VR streaming that integrates viewport adaptation and server cooperation. We also explore the possibility of network coded data operation and its implications for the analysis, optimization, and system performance we pursue here. We demonstrate considerable gains in delivered immersion fidelity, featuring much higher 360-degree viewport peak signal to noise ratio (PSNR) and VR video frame rates and spatial resolutions. 
    more » « less
  2. The goal of this study was to evaluate driver risk behavior in response to changes in their risk perception inputs, specifically focusing on the effect of augmented visual representation technologies. This experiment was conducted for the purely real-driving scenario, establishing a baseline by which future, augmented visual representation scenarios can be compared. Virtual Reality (VR), Augmented Reality (AR) and Mixed Reality (MR) simulation technologies have rapidly improved over the last three decades to where, today, they are widely used and more heavily relied upon than before, particularly in the areas of training, research, and design. The resulting utilization of these capabilities has proven simulation technologies to be a versatile and powerful tool. Virtual immersion, however, introduces a layer of abstraction and safety between the participant and the designed artifact, which includes an associated risk compensation. Quantifying and modeling the relationship between this risk compensation and levels of virtual immersion is the greater goal of this project. This study focuses on the first step, which is to determine the level of risk perception for a purely real environment for a specific man-machine system - a ground vehicle – operated in a common risk scenario – traversing a curve at high speeds. Specifically, passengers are asked to assess whether the vehicle speed within a constant-radius curve is perceived as comfortable. Due to the potential for learning effects to influence risk perception, the experiment was split into two separate protocols: the latent response protocol and the learned response protocol. The latent response protocol applied to the first exposure of an experimental condition to the subject. It consisted of having the subjects in the passenger seat assess comfort or discomfort within a vehicle that was driven around a curve at a randomlychosen value among a selection of test speeds; subjects were asked to indicate when they felt uncomfortable by pressing a brake pedal that was instrumented to alert the driver. Next, the learned response protocol assessed the subjects for repeated exposures but allowing subjects to use brake and throttle pedals to indicate if they wanted to go faster or slower; the goal was to allow subjects to iterate toward their maximum comfortable speed. These pedals were instrumented to alert the driver who responded accordingly. Both protocols were repeated for a second curve with a different radius. Questionnaires were also administered after each trial that addressed the subjective perception of risk and provided a means to substantiate the measured risk compensation behavior. The results showed that, as expected, the latent perception of risk for a passenger traversing a curve was higher than the learned perception for successive exposures to the same curve; in other words, as drivers ‘learned’ a curve, they were more comfortable with higher speeds. Both the latent and learned speeds provide a suitable metric by which to compare future replications of this experiment at different levels of virtual immersion. Correlations were found between uncomfortable subject responses and the yaw acceleration of the vehicle. Additional correlation of driver discomfort was found to occur at specific locations on the curves. The yaw acceleration is a reflection of the driver’s ability to maintain a steady steering input, whereas the location on the curve was found to correlate with variations in the lane-markings and environmental cues. 
    more » « less
  3. Delivering videos under less-than-ideal network conditions without compromising end-users' quality of experiences is a hard problem. Virtually all prior work follow a piecemeal approach---either "tweaking" the fully reliable transport layer or making the client "smarter." We propose VOXEL, a cross-layer optimization system for video streaming. We use VOXEL to demonstrate how to combine application-provided "insights" with a partially reliable protocol for optimizing video streaming. To this end, we present a novel ABR algorithm that explicitly trades off losses for improving end-users' video-watching experiences. VOXEL is fully compatible with DASH, and backward-compatible with VOXEL-unaware servers and clients. In our experiments emulating a wide range of network conditions, VOXEL outperforms the state-of-the-art: We stream videos in the 90th-percentile with up to 97% less rebuffering than the state-of-the-art without sacrificing visual fidelity. We also demonstrate the benefits of VOXEL for small-buffer regimes like the emerging use case of low-latency and live streaming. In a survey of 54 real users, 84% of the participants indicated that they prefer videos streamed using VOXEL compared to the state-of-the-art. 
    more » « less
  4. While recent work explored streaming volumetric content on-demand, there is little effort on live volumetric video streaming that bears the potential of bringing more exciting applications than its on-demand counterpart. To fill this critical gap, in this paper, we propose MetaStream, which is, to the best of our knowledge, the first practical live volumetric content capture, creation, delivery, and rendering system for immersive applications such as virtual, augmented, and mixed reality. To address the key challenge of the stringent latency requirement for processing and streaming a huge amount of 3D data, MetaStream integrates several innovations into a holistic system, including dynamic camera calibration, edge-assisted object segmentation, cross-camera redundant point removal, and foveated volumetric content rendering. We implement a prototype of MetaStream using commodity devices and extensively evaluate its performance. Our results demonstrate that MetaStream achieves low-latency live volumetric video streaming at close to 30 frames per second on WiFi networks. Compared to state-of-the-art systems, MetaStream reduces end-to-end latency by up to 31.7% while improving visual quality by up to 12.5%. 
    more » « less
  5. Internet of Things (IoT) is a connected network of devices that exchange data using different protocols. The application of IoT ranges from intelligent TVs and intelligent Refrigerators to smart Transportation. This research aims to provide students with hands-on training on how to develop an IoT platform that supports device management, connectivity, and data management. People tend to build interconnected devices without having a basic understanding of how the IoT platform backend function. Studying the Arm Pelion will help to understand how IoT devices operate under the hood. This past summer, Morgan State University has hosted undergraduate engineering students and high school STEM teachers to conduct IoT security research in the Cybersecurity Assurance & Policy (CAP) Center. The research project involved integrating various hardware sensor devices and real-time data monitoring using the Arm Pelion IoT development platform. Some of the student/teacher outcomes from the project include: 1) Learning about IoT Technology and security; 2) Programming an embedded system using Arm Mbed development board and IDE; 3 3) Developing a network of connected IoT devices using different protocols such as LWM2M, MQTT, CoAP; 4) Investigating the cybersecurity risks associated with the platform; and 5) Using data analysis and visualization to understand the network data and packet flow. First, the student/teacher must consider the IoT framework to understand how to address the security. The IoT framework describes the essential functions of an IoT network, breaking it down into separate layers. These layers include an application layer, middleware layer, and connectivity layer. The application layer allows the users to access the platform via a smartphone or any other dashboard. The Middleware layer represents the backend system that provides edge devices with data management, messaging, application services, and authentication. Finally, the connectivity layer includes devices that connect the user to the network, including Bluetooth or WiFi. The platform consists of several commercial IoT devices such as a smart camera, baby monitor, smart light, and other devices. We then create algorithms to classify the network data flow; to visualize the packets flow in the network and the structure of the packets data frame over time. 
    more » « less