skip to main content


Title: Mechanical cloak via data-driven aperiodic metamaterial design
Mechanical cloaks are materials engineered to manipulate the elastic response around objects to make them indistinguishable from their homogeneous surroundings. Typically, methods based on material-parameter transformations are used to design optical, thermal, and electric cloaks. However, they are not applicable in designing mechanical cloaks, since continuum-mechanics equations are not form invariant under general coordinate transformations. As a result, existing design methods for mechanical cloaks have so far been limited to a narrow selection of voids with simple shapes. To address this challenge, we present a systematic, data-driven design approach to create mechanical cloaks composed of aperiodic metamaterials using a large precomputed unit cell database. Our method is flexible to allow the design of cloaks with various boundary conditions, multiple loadings, different shapes and numbers of voids, and different homogeneous surroundings. It enables a concurrent optimization of both topology and properties distribution of the cloak. Compared to conventional fixed-shape solutions, this results in an overall better cloaking performance and offers unparalleled versatility. Experimental measurements on additively manufactured structures further confirm the validity of the proposed approach. Our research illustrates the benefits of data-driven approaches in quickly responding to new design scenarios and resolving the computational challenge associated with multiscale designs of functional structures. It could be generalized to accommodate other applications that require heterogeneous property distribution, such as soft robots and implants design.  more » « less
Award ID(s):
1835677 1835782 1835648
NSF-PAR ID:
10378213
Author(s) / Creator(s):
; ; ; ; ;
Date Published:
Journal Name:
Proceedings of the National Academy of Sciences
Volume:
119
Issue:
13
ISSN:
0027-8424
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. Abstract

    Zero Poisson’s ratio structures are a new class of mechanical metamaterials wherein the absence of lateral deformations allows the structure to adapt and conform their geometries to desired shapes with minimal interventions. These structures have gained attention in large deformation applications where shape control is a key performance attribute, with examples including but not limited to shape morphing, soft robotics, and flexible electronics. The present study introduces an experimentally driven approach that leads to the design and development of (near) zero Poisson’s ratio structures with considerable load-bearing capacities through concurrent density and architecture gradations in hybrid honeycombs created from hexagonal and re-entrant cells. The strain-dependent Poisson’s ratios in hexagonal and re-entrant honeycombs with various cell wall thicknesses have been characterized experimentally. A mathematical approach is then proposed and utilized to create hybrid structures wherein the spatial distribution of different cell shapes and densities leads to the development of honeycombs with minimal lateral deformations under compressive strains as high as 0.7. Although not considered design criteria, the load-bearing and energy absorption capacities of the hybrid structures are shown to be comparable with those of uniform cell counterparts. Finally, the new hybrid structures indicate lesser degrees of instability (in the form of cell buckling and collapse) due to the self-constraining effects imposed internally by the adjacent cell rows in the structures.

     
    more » « less
  2. SUMMARY

    Full-waveform inversion (FWI) methods rely on accurate numerical simulation of wave propagation in the analysed medium. Acoustic or elastic wave equations are often used to model seismic wave propagation. These types of simulations do not account for intrinsic attenuation effects due to material anelasticity, and thus correction techniques have been utilized in practice to partially compensate the anelasticity. These techniques often only consider the waveform amplitude correction based on averaging of overall amplitude response over the entire data set, and ignore the phase correction. Viscoelastic wave equations account for the anelastic response in both waveform amplitude and phase, and are therefore a more suitable alternative. In this study, we present a novel 3-D Gauss–Newton viscoelastic FWI (3-D GN-VFWI) method. To address the main challenge of the Gauss–Newton optimization, we develop formulas to compute the Jacobian efficiently by the convolution of virtual sources and backward wavefields. The virtual sources are obtained by directly differentiating the viscoelastic wave equations with respect to model parameters. In order to resolve complex 3-D structures with reasonable computational effort, a homogeneous attenuation (Q factor) is used throughout the analysis to model the anelastic effects. Synthetic and field experiments are performed to demonstrate the utility of the method. The synthetic results clearly demonstrate the ability of the method in characterizing a challenging velocity profile, including voids and reverse velocity layers. The field experimental results show that method successfully characterizes the complex substructure with two voids and undulating limestone bedrock, which are confirmed by invasive tests. Compared to 3-D elastic FWI results, the presented viscoelastic method produces more accurate results regarding depths of the voids and bedrock. This study suggests that the improvement of imaging accuracy would warrant the widespread use of viscoelastic wave equations in FWI problems. To our best knowledge, this is the first reported study on 3-D GN-VFWI at any scale. This study provides the new theory and formulation for the use of Gauss–Newton optimization on the 3-D viscoelastic problem.

     
    more » « less
  3. Context. Radio relics are diffuse extended synchrotron sources that originate from shock fronts induced by galaxy cluster mergers. The particle acceleration mechanism at the shock fronts is still under debate. The galaxy cluster 1RXS J0603.3+4214 hosts one of the most intriguing examples of radio relics, known as the Toothbrush. Aims. In order to understand the mechanism(s) that accelerate(s) relativistic particles in the intracluster medium, we investigated the spectral properties of large-scale diffuse extended sources in the merging galaxy cluster 1RXS J0603.3+4214. Methods. We present new wideband radio continuum observations made with uGMRT and VLA. Our new observations, in combination with previously published data, allowed us to carry out a detailed high-spatial-resolution spectral and curvature analysis over a wide range of frequencies. Results. The integrated spectrum of the Toothbrush closely follows a power law over almost two orders of magnitude in frequency, with a spectral index of −1.16 ± 0.02. We do not find any evidence of spectral steepening below 8 GHz. The subregions of the Toothbrush also exhibit near-perfect power laws and identical spectral slopes, suggesting that the observed spectral index is rather set by the distribution of Mach numbers which may have a similar shape at different parts of the shock front. Indeed, numerical simulations show an intriguing similar spectral index, indicating that the radio spectrum is dominated by the average over the inhomogeneities within the shock, with most of the emission coming from the tail of the Mach number distribution. In contrast to the Toothbrush, the spectra of the fainter relics show a high-frequency steepening. Moreover, the integrated spectrum of the halo also follows a power law from 150 MHz to 3 GHz with a spectral index of −1.16 ± 0.04. We do not find any evidence for spectral curvature, not even in subareas of the halo. This suggest a homogeneous acceleration throughout the cluster volume. Between the “brush” region of the Toothbrush and the halo, the color-color analysis reveals emission that was consistent with an overlap between the two different spectral regions. Conclusions. None of the relic structures, that is, the Toothbrush as a whole or its subregions or the other two fainter relics, show spectral shapes consistent with a single injection of relativistic electrons, such as at a shock, followed by synchrotron aging in a relatively homogeneous environment. Inhomogeneities in some combination of Mach number, magnetic field strength, and projection effects dominate the observed spectral shapes. 
    more » « less
  4. Abstract

    Deterministic transformations of 2D patterns of materials into well‐controlled 3D mesostructures serve as the basis for manufacturing methods that can bypass limitations of conventional 3D micro/nanofabrication. Here, guided mechanical buckling processes provide access to a rich range of complex 3D mesostructures in high‐performance materials, from inorganic and organic semiconductors, metals and dielectrics, to ceramics and even 2D materials (e.g., graphene, MoS2). Previous studies demonstrate that iterative computational procedures can define design parameters for certain targeted 3D configurations, but without the ability to address complex shapes. A technical need is in efficient, generalized inverse design algorithms that directly yield sets of optimized parameters. Here, such schemes are introduced, where the distributions of thicknesses across arrays of separated or interconnected ribbons provide scalable routes to 3D surfaces with a broad range of targeted shapes. Specifically, discretizing desired shapes into 2D ribbon components allows for analytic solutions to the inverse design of centrally symmetric and even general surfaces, in an approximate manner. Combined theoretical, numerical, and experimental studies of ≈20 different 3D structures with characteristic sizes (e.g., ribbon width) ranging from ≈200 µm to ≈2 cm and with geometries that resemble hemispheres, fire balloons, flowers, concave lenses, saddle surfaces, waterdrops, and rodents, illustrate the essential ideas.

     
    more » « less
  5. Abstract

    Origami, the ancient art of paper folding, has shown its potential as a versatile platform to design various reconfigurable structures. The designs of most origami-inspired architected materials rely on a periodic arrangement of identical unit cells repeated throughout the whole system. It is challenging to alter the arrangement once the design is fixed, which may limit the reconfigurable nature of origami-based structures. Inspired by phase transformations in natural materials, here we study origami tessellations that can transform between homogeneous configurations and highly heterogeneous configurations composed of different phases of origami unit cells. We find that extremely localized and reprogrammable heterogeneity can be achieved in our origami tessellation, which enables the control of mechanical stiffness and in-situ tunable locking behavior. To analyze this high reconfigurability and variable stiffness systematically, we employ Shannon information entropy. Our design and analysis strategy can pave the way for designing new types of transformable mechanical devices.

     
    more » « less