Hf0.5Zr0.5O2‐based materials have garnered significant attention for applications requiring ferroelectricity at the nanoscale. This behavior arises due to the stabilization of metastable phases at room temperature. However, the synthesis of phase pure Hf0.5Zr0.5O2remains a challenging problem in both thin films and nanoparticles. Herein, the crystallization of Hf0.5Zr0.5O2nanoparticles from an as‐synthesized amorphous phase is studied. By tailoring the aggregate nature of the intermediate amorphous nanoparticles via different drying processes, the crystallization pathway can be altered, resulting in significant differences in crystal structure, crystallite size, and crystallite morphology after calcination. X‐ray diffraction (XRD) and Rietveld refinement show the dominant crystallographic phase changes from a monoclinic structure to a cubic structure for samples with decreased aggregation. Samples prepared via freeze drying exhibit the most aggregation control and correspond with the observation of single‐crystalline particle aggregates and branching structures attributed to a crystallization by particle attachment mechanism. Herein, differing crystallization pathways lead to unique crystal morphologies that stabilize the traditionally high‐temperature phases of Hf0.5Zr0.5O2‐based materials that are necessary for functional applications.
- Award ID(s):
- 2104881
- NSF-PAR ID:
- 10382975
- Date Published:
- Journal Name:
- Proceedings of the National Academy of Sciences
- Volume:
- 119
- Issue:
- 27
- ISSN:
- 0027-8424
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract Perovskite photovoltaic ABX3systems are being studied due to their high energy‐conversion efficiencies with current emphasis placed on pure inorganic systems. In this work, synchrotron single‐crystal diffraction measurements combined with second harmonic generation measurements reveal the absence of inversion symmetry below room temperature in CsPbBr3. Local structural analysis by pair distribution function and X‐ray absorption fine structure methods are performed to ascertain the local ordering, atomic pair correlations, and phase evolution in a broad range of temperatures. The currently accepted space group assignments for CsPbBr3are found to be incorrect in a manner that profoundly impacts physical properties. New assignments are obtained for the bulk structure: (above ≈410 K),
P 21/m (between ≈300 K and ≈410 K), and the polar groupPm (below ≈300 K), respectively. The newly observed structural distortions exist in the bulk structure consistent with the expectation of previous photoluminescence and Raman measurements. High‐pressure measurements reveal multiple low‐pressure phases, one of which exists as a metastable phase at ambient pressure. This work should help guide research in the perovskite photovoltaic community to better control the structure under operational conditions and further improve transport and optical properties. -
null (Ed.)Abstract. High-altitude cirrus clouds are climatically important: their formationfreeze-dries air ascending to the stratosphere to its final value, and theirradiative impact is disproportionately large. However, their formation andgrowth are not fully understood, and multiple in situ aircraft campaigns haveobserved frequent and persistent apparent water vapor supersaturations of5 %–25 % in ultracold cirrus (T<205 K), even in the presence of iceparticles. A variety of explanations for these observations have been putforth, including that ultracold cirrus are dominated by metastable ice whosevapor pressure exceeds that of hexagonal ice. The 2013 IsoCloud campaign atthe Aerosol Interaction and Dynamics in the Atmosphere (AIDA) cloud andaerosol chamber allowed explicit testing of cirrus formation dynamics atthese low temperatures. A series of 28 experiments allows robust estimationof the saturation vapor pressure over ice for temperatures between 189 and235 K, with a variety of ice nucleating particles. Experiments are rapidenough (∼10 min) to allow detection of any metastable ice that mayform, as the timescale for annealing to hexagonal ice is hours or longer overthe whole experimental temperature range. We show that in all experiments,saturation vapor pressures are fully consistent with expected values forhexagonal ice and inconsistent with the highest values postulated formetastable ice, with no temperature-dependent deviations from expectedsaturation vapor pressure. If metastable ice forms in ultracold cirrusclouds, it appears to have a vapor pressure indistinguishable from that ofhexagonal ice to within about 4.5 %.more » « less
-
Abstract Iron nitrides are possible constituents of the cores of Earth and other terrestrial planets. Pressure‐induced magnetic changes in iron nitrides and effects on compressibility remain poorly understood. Here we report synchrotron X‐ray emission spectroscopy (XES) and X‐ray diffraction (XRD) results for ε‐Fe7N3and γ′‐Fe4N up to 60 GPa at 300 K. The XES spectra reveal completion of high‐ to low‐spin transition in ε‐Fe7N3and γ′‐Fe4N at 43 and 34 GPa, respectively. The completion of the spin transition induces stiffening in bulk modulus of ε‐Fe7N3by 22% at ~40 GPa, but has no resolvable effect on the compression behavior of γ′‐Fe4N. Fitting pressure‐volume data to the Birch‐Murnaghan equation of state yields
V 0 = 83.29 ± 0.03 (Å3),K 0 = 232 ± 9 GPa,K 0′ = 4.1 ± 0.5 for nonmagnetic ε‐Fe7N3above the spin transition completion pressure, andV 0 = 54.82 ± 0.02 (Å3),K 0 = 152 ± 2 GPa,K 0′ = 4.0 ± 0.1 for γ′‐Fe4N over the studied pressure range. By reexamining evidence for spin transition and effects on compressibility of other candidate components of terrestrial planet cores, Fe3S, Fe3P, Fe7C3, and Fe3C based on previous XES and XRD measurements, we located the completion of high‐ to low‐spin transition at ~67, 38, 50, and 30 GPa at 300 K, respectively. The completion of spin transitions of Fe3S, Fe3P, and Fe3C induces elastic stiffening, whereas that of Fe7C3induces elastic softening. Changes in compressibility at completion of spin transitions in iron‐light element alloys may influence the properties of Earth's and planetary cores. -
Abstract The Chemistry and Mineralogy X-ray diffraction (XRD) instrument aboard the Curiosity rover consistently identifies amorphous material at Gale Crater, which is compositionally variable, but often includes elevated sulfur and iron, suggesting that amorphous ferric sulfate (AFS) may be present. Understanding how desiccating ferric sulfate brines affect the spectra of Martian material analogs is necessary for interpreting complex/realistic reaction assemblages. Visible and near-infrared reflectance (VNIR), mid-infrared attenuated total reflectance (MIR, FTIR-ATR), and Raman spectra, along with XRD data are presented for basaltic glass, hematite, gypsum, nontronite, and magnesite, each at three grain sizes (<25, 25–63, and 63–180
μ m), mixed with ferric sulfate (+/−NaCl), deliquesced, then rapidly desiccated in 11% relative humidity or via vacuum. All desiccated products are partially or completely XRD amorphous; crystalline phases include starting materials and trace precipitates, leaving the bulk of the ferric sulfate in the amorphous fraction. Due to considerable spectral masking, AFS detectability is highly dependent on spectroscopic technique and minerals present. This has strong implications for remote and in situ observations of Martian samples that include an amorphous component. AFS is only identifiable in VNIR spectra for magnesite, nontronite, and gypsum samples; hematite and basaltic glass samples appear similar to pure materials. Sulfate features dominate Raman spectra for nontronite and basaltic glass samples; the analog material dominates Raman spectra of hematite and gypsum samples. MIR data are least affected by masking, but basaltic glass is almost undetectable in MIR spectra of those mixtures. NaCl produces similar FTIR-ATR and Raman features, regardless of analog material.