An official website of the United States government
We investigate the influence of the host matrix on the photothermally driven actuation performance of negatively photochromic, donor−acceptor Stenhouse adduct (DASA)-based polymers. Using a modular Diels−Alder “click” platform, we designed polymeric materials with varying DASA incorporation and investigated the relationships between the material composition and the resulting physical, mechanical, and photoswitching properties. We demonstrate that increasing the DASA concentration in polymer conjugates has a dramatic effect on the material’s physical and mechanical properties, such as the glass transition temperature (Tg) and elastic modulus, as well as the photoswitching properties, which are found to be highly dependent on Tg. We establish using a simple photoresponsive bilayer that actuation performance is controlled by the bilayer stiffness rather than the photochrome incorporation of DASA. Finally, we report and compare the light-induced property changes in Tg and the elastic modulus between the materials comprising the open or closed forms of DASAs. Our results demonstrate the importance of designing a material that is stiff enough to provide the mechanical strength required for actuation under load, but soft enough to reversibly switch at the operational temperature and provide key considerations for the development of application-geared photoswitchable materials.
more »
« less
Analysis of Nucleation and Glass Formation by Chip Calorimetry
The advent of chip calorimetry has enabled an unprecedented extension of the capability of differential scanning calorimetry to explore new domains of materials behavior. In this paper, we highlight some of our recent work: the application of heating and cooling rates above 104 K/s allows for the clear determination of the glass transition temperature, Tg, in systems where Tg and the onset temperature for crystallization, Tx, overlap; the evaluation of the delay time for crystal nucleation; the discovery of new polyamorphous materials; and the in-situ formation of glass in liquid crystals. From these application examples, it is evident that chip calorimetry has the potential to reveal new reaction and transformation behavior and to develop a new understanding.
more »
« less
- Award ID(s):
- 1720415
- PAR ID:
- 10384304
- Date Published:
- Journal Name:
- Applied Sciences
- Volume:
- 11
- Issue:
- 16
- ISSN:
- 2076-3417
- Page Range / eLocation ID:
- 7652
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
This study assesses physical and chemical properties of fiber reinforced polymer (FRP) composite materials aged in Alaska’s subarctic climate. Carbon FRP (CFRP) and glass FRP (GFRP) samples were collected in 2019 from the exterior and interior of Ted Stevens International Airport (TSIA, retrofitted in 2008) and McKinley Tower (MKT, retrofitted in 2004). Differential scanning calorimetry (DSC) was used to measure glass transition temperature (Tg) and physical aging, FTIR and Raman spectroscopy were used to investigate potential chemical degradation and degree of cure, and scanning electron microscopy (SEM) to evaluate cross-sectional microstructure, respectively. The results indicate that exposure to the subarctic climate had minimal effect on the composites’ and chemical properties. The variability in fiber content at MKT and thermal properties at TSIA suggest there were likely some inconsistencies in the FRP installation that may affect load-carrying capacity. Furthermore, some microcracks were observed in the FRP retrofits which may have resulted from a combination of poor fiber impregnation and thermal cycling.more » « less
-
The glass transition (Tg) behavior and enthalpy recovery of polystyrene nanorods within an anodic aluminum oxide (AAO) template (supported nanorods) and after removal from AAO (unsupported nanorods) is studied using Flash differential scanning calorimetry. Tg is found to be depressed relative to the bulk by 20 ± 2 K for 20 nm-diameter unsupported polystyrene (PS) nanorods at the slowest cooling rate and by 9 ± 1 K for 55 nm-diameter rods. On the other hand, bulk-like behavior is observed in the case of unsupported 350 nm-diameter nanorods and for all supported rods in AAO. The size-dependent Tg behavior of the PS unsupported nanorods compares well with results for ultrathin films when scaled using the volume/surface ratio. Enthalpy recovery was also studied for the 20 and 350 nm unsupported nanorods with evolution toward equilibrium found to be linear with logarithmic time. The rate of enthalpy recovery for the 350 nm rods was similar to that for the bulk, whereas the rate of recovery was enhanced for the 20 nm rods for down-jump sizes larger than 17 K. A relaxation map summarizes the behavior of the nanorods relative to the bulk and relative to that for the 20 nm-thick ultrathin film. Interestingly, the fragility of the 20 nm-diameter nanorod and the 20 nm ultrathin film are identical within the error of measurements, and when plotted vs departure from Tg (i.e., T − Tg), the relaxation maps of the two samples are identical in spite of the fact that the Tg is depressed 8 K more in the nanorod sample.more » « less
-
This paper develops a machine learning methodology for the rapid and robust prediction of the glass transition temperature (Tg) for polymers for the targeted application of sustainable high-temperature polymers. The machine learning framework combines multiple techniques to develop a feature set encompassing all relative aspects of polymer chemistry, to extract and explain correlations between features and Tg, and to develop and apply a high-throughput predictive model. In this work, we identify aspects of the chemistry that most impact Tg, including a parameter related to rotational degrees of freedom and a backbone index based on a steric hindrance parameter. Building on this scientific understanding, models are developed on different types of data to ensure robustness, and experimental validation is obtained through the testing of new polymer chemistry with remarkable Tg. The ability of our model to predict Tg shows that the relevant information is contained within the topological descriptors, while the requirement of non-linear manifold transformation of the data also shows that the relationships are complex and cannot be captured through traditional regression approaches. Building on the scientific understanding obtained from the correlation analyses, coupled with the model performance, it is shown that the rigidity and interaction dynamics of the polymer structure are key to tuning for achieving targeted performance. This work has implications for future rapid optimization of chemistriesmore » « less
-
ABSTRACT The discovery of high‐performance shape memory polymers (SMPs) with enhanced glass transition temperatures (Tg) is of paramount importance in fields such as geothermal energy, oil and gas, aerospace, and other high‐temperature applications, where materials are required to exhibit shape memory effect at extremely high‐temperature conditions. Here, we employ a novel machine learning framework that integrates transfer learning with variational autoencoders (VAE) to efficiently explore the chemical design space of SMPs and identify new candidates with high Tg values. We systematically investigate the effect of different latent space dimensions on the VAE model performance. Several machine learning models are then trained to predict Tg. We find that the SVM model demonstrates the highest predictive accuracy, withR2values exceeding 0.87 and a mean absolute percentage error as low as 6.43% on the test set. Through systematic molar ratio adjustments and VAE‐based fingerprinting, we discover novel SMP candidates with Tg values between 190°C and 200°C, suitable for high‐temperature applications. These findings underscore the effectiveness of combining VAEs and SVM for SMP discovery, offering a scalable and efficient method for identifying polymers with tailored thermal properties.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.3390/app11167652
