An official website of the United States government
Twisted photonic crystals are photonic analogs of twisted monolayer materials such as graphene and their optical property studies are still in their infancy. This paper reports optical properties of twisted single-layer 2D+ moiré photonic crystals where there is a weak modulation in z direction, and bilayer moiré-overlapping-moiré photonic crystals. In weak-coupling bilayer moiré-overlapping-moiré photonic crystals, the light source is less localized with an increasing twist angle, similar to the results reported by the Harvard research group in References 37 and 38 on twisted bilayer photonic crystals, although there is a gradient pattern in the former case. In a strong-coupling case, however, the light source is tightly localized in AA-stacked region in bilayer PhCs with a large twist angle. For single-layer 2D+ moiré photonic crystals, the light source in Ex polarization can be localized and forms resonance modes when the single-layer 2D+ moiré photonic crystal is integrated on a glass substrate. This study leads to a potential application of 2D+ moiré photonic crystal in future on-chip optoelectronic integration.
more »
« less
Ultrasonic delamination based adhesion testing for high-throughput assembly of van der Waals heterostructures
Two-dimensional (2D) materials assembled into van der Waals (vdW) heterostructures contain unlimited combinations of mechanical, optical, and electrical properties that can be harnessed for potential device applications. Critically, these structures require control over interfacial adhesion for enabling their construction and have enough integrity to survive industrial fabrication processes upon their integration. Here, we promptly determine the adhesion quality of various exfoliated 2D materials on conventional SiO 2 /Si substrates using ultrasonic delamination threshold testing. This test allows us to quickly infer relative substrate adhesion based on the percent area of 2D flakes that survive a fixed time in an ultrasonic bath, allowing for control over process parameters that yield high or poor adhesion. We leverage this control of adhesion to optimize the vdW heterostructure assembly process, where we show that samples with high or low substrate adhesion relative to each other can be used selectively to construct high-throughput vdW stacks. Instead of tuning the adhesion of polymer stamps to 2D materials with constant 2D-substrate adhesion, we tune the 2D-substrate adhesion with constant stamp adhesion to 2D materials. The polymer stamps may be reused without any polymer melting steps, thus avoiding high temperatures (<120 °C) and allowing for high-throughput production. We show that this procedure can be used to create high-quality 2D twisted bilayer graphene on SiO 2 /Si, characterized with atomic force microscopy and Raman spectroscopic mapping, as well as low-angle twisted bilayer WSe 2 on h-BN/SiO 2 /Si, where we show direct real-space visualization of moiré reconstruction with tilt-angle dependent scanning electron microscopy.
more »
« less
- PAR ID:
- 10386966
- Date Published:
- Journal Name:
- Journal of Applied Physics
- Volume:
- 132
- Issue:
- 22
- ISSN:
- 0021-8979
- Page Range / eLocation ID:
- 225302
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract Twisted 2D materials form complex moiré structures that spontaneously reduce symmetry through picoscale deformation within a mesoscale lattice. We show twisted 2D materials contain a torsional displacement field comprised of three transverse periodic lattice distortions (PLD). The torsional PLD amplitude provides a single order parameter that concisely describes the structural complexity of twisted bilayer moirés. Moreover, the structure and amplitude of a torsional periodic lattice distortion is quantifiable using rudimentary electron diffraction methods sensitive to reciprocal space. In twisted bilayer graphene, the torsional PLD begins to form at angles below 3.89° and the amplitude reaches 8 pm around the magic angle of 1. 1°. At extremely low twist angles (e.g. below 0.25°) the amplitude increases and additional PLD harmonics arise to expand Bernal stacked domains separated by well defined solitonic boundaries. The torsional distortion field in twisted bilayer graphene is analytically described and has an upper bound of 22.6 pm. Similar torsional distortions are observed in twisted WS 2 , CrI 3 , and WSe 2 /MoSe 2 .more » « less
-
null (Ed.)Abstract Monolayer (ML) molybdenum disulfide (MoS₂) is a novel 2-dimensional (2D) semiconductor whose properties have many applications in devices. Despite its potential, ML MoS₂ is limited in its use due to its degradation under exposure to ambient air. Therefore, studies of possible degradation prevention methods are important. It is well established that air humidity plays a major role in the degradation. In this paper, we investigate the effects of substrate hydrophobicity on the degradation of chemical vapor deposition (CVD) grown ML MoS 2 . We use optical microscopy, atomic force microscopy (AFM), and Raman mapping to investigate the degradation of ML MoS 2 grown on SiO 2 and Si 3 N 4 that are hydrophilic and hydrophobic substrates, respectively. Our results show that the degradation of ML MoS₂ on Si 3 N 4 is significantly less than the degradation on SiO 2 . These results show that using hydrophobic substrates to grow 2D transition metal dichalcogenide ML materials may diminish ambient degradation and enable improved protocols for device manufacturing.more » « less
-
ABSTRACT In the search for chemically stable two-dimensional (2D) materials with high in-plane mobility, proper bandgap, and compatibility with vapor-based fabrication, van der Waals semiconductor SiP has become a potential candidate as a robust variation of black phosphorous. While bulk SiP crystals were synthesized in the 1970s, the vapor-based synthesis of SiP nanostructures or thin films is still absent. We here report the first chemical vapor growth of SiP nanostructures on SiO 2 /Si substrate. SiP islands with lateral size up to 20 μm and showing well-defined Raman signals were grown on SiO 2 /Si substrate or on SiP-containing concentric rings. The presence of SiP phase is confirmed by XRD. The formation of rings and islands is explained by a multiple coffee ring growth model where a dynamic fluctuation of droplet growth front induces the topography of concentric ring surfaces. This new growth method might shed light on the controlled growth of group IV-III high-mobility 2D semiconductors.more » « less
-
Abstract The design and formation of van der Waals (vdW) heterostructures with different two-dimensional (2D) materials provide an opportunity to create materials with extraordinary physical properties tailored toward specific applications. Mechanical exfoliation of natural vdW materials has been recognized as an effective way for producing high-quality ultrathin vdW heterostructures. Abramovite is one of such naturally occurring vdW materials, where the superlattice is composed of alternating Pb 2 BiS 3 and SnInS 4 2D material lattices. The forced commensuration between the two incommensurate constituent 2D material lattices induces in-plane structural anisotropy in the formed vdW heterostructure of abramovite, even though the individual 2D material lattices are isotropic in nature. Here, we show that ultrathin layers of vdW heterostructures of abramovite can be achieved by mechanical exfoliation of the natural mineral. Furthermore, the structural anisotropy induced highly anisotropic vibrational and optical responses of abramovite thin flakes are demonstrated by angle-resolved polarized Raman scattering, linear dichroism, and polarization-dependent third-harmonic generation. Our results not only establish abramovite as a promising natural vdW material with tailored linear and nonlinear optical properties for building future anisotropic integrated photonic devices, but also provide a deeper understanding of the origin of structural, vibrational and optical anisotropy in vdW heterostructures.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1063/5.0126446
