skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.
Attention:The NSF Public Access Repository (NSF-PAR) system and access will be unavailable from 7:00 AM ET to 7:30 AM ET on Friday, April 24 due to maintenance. We apologize for the inconvenience.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Observations with the Southern Connecticut Stellar Interferometer. I. Instrument Description and First Results
Abstract We discuss the design, construction, and operation of a new intensity interferometer, based on the campus of Southern Connecticut State University in New Haven, Connecticut. While this paper will focus on observations taken with an original two-telescope configuration, the current instrumentation consists of three portable 0.6 m Dobsonian telescopes with single-photon avalanche diode detectors located at the Newtonian focus of each telescope. Photons detected at each station are time stamped and read out with timing correlators that can give cross-correlations in timing to a precision of 48 ps. We detail our observations to date with the system, which has now been successfully used at our university in 16 nights of observing. Components of the instrument were also deployed on one occasion at Lowell Observatory, where the Perkins and Hall telescopes were made to function as an intensity interferometer. We characterize the performance of the instrument in detail. In total, the observations indicate the detection of a correlation peak at the level of 6.76 σ when observing unresolved stars, and consistency with partial or no detection when observing at a baseline sufficient to resolve the star. Using these measurements, we conclude that the angular diameter of Arcturus is larger than 15 mas and that of Vega is between 0.8 and 17 mas. While the uncertainties are large at this point, both results are consistent with measures from amplitude-based long baseline optical interferometers.  more » « less
Award ID(s):
1909582
PAR ID:
10388161
Author(s) / Creator(s):
; ; ; ;
Date Published:
Journal Name:
The Astronomical Journal
Volume:
163
Issue:
2
ISSN:
0004-6256
Page Range / eLocation ID:
92
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; (, Optical and Infrared Interferometry and Imaging VII)
    Mérand, Antoine; Sallum, Stephanie; Tuthill, Peter G. (Ed.)
    The Southern Connecticut Stellar Interferometer (SCSI) is an intensity interferometer that is designed to use correlated photon arrival times to determine the geometry of stars. Originally a low-cost, two-telescope instrument that used a 1-pixel single-photon avalanche diode (SPAD) detector at the focal plane of each telescope to record photon events, it is now being upgraded to include a third telescope. This will allow for the simultaneous detection of the photon correlation at three baselines, and thus the ability to map out the two-dimensional geometry of the source much more efficiently than with the two-telescope arrangement. Recent papers in the literature suggest that it may be possible to derive phase information in the Fourier domain from such triple correlations for the brightest stars, potentially giving SCSI an imaging capability. Prior to investigating this possibility, steps must be taken to maximize the observing efficiency of the SCSI. We present here our latest efforts in achieving better pointing, tracking, and collimation with our telescopes, and we discuss our first modeling results of the three-telescope situation in order to understand under what conditions the upgraded SCSI could retrieve imaging information. 
    more » « less
  2. ; ; ; ; ; ; ; ; ; ; et al (, The Astronomical Journal)
    Abstract The Canadian Hydrogen Intensity Mapping Experiment (CHIME) has emerged as the prime telescope for detecting fast radio bursts (FRBs). CHIME/FRB Outriggers will be a dedicated very-long-baseline interferometry (VLBI) instrument consisting of outrigger telescopes at continental baselines working with CHIME and its specialized real-time transient-search backend (CHIME/FRB) to detect and localize FRBs with 50 mas precision. In this paper, we present a minimally invasive clock stabilization system that effectively transfers the CHIME digital backend reference clock from its original GPS-disciplined ovenized crystal oscillator to a passive hydrogen maser. This enables us to combine the long-term stability and absolute time tagging of the GPS clock with the short- and intermediate-term stability of the maser to reduce the clock timing errors between VLBI calibration observations. We validate the system with VLBI-style observations of Cygnus A over a 400 m baseline between CHIME and the CHIME Pathfinder, demonstrating agreement between sky-based and maser-based timing measurements at the 30 ps rms level on timescales ranging from one minute to up to nine days, and meeting the stability requirements for CHIME/FRB Outriggers. In addition, we present an alternate reference clock solution for outrigger stations that lack the infrastructure to support a passive hydrogen maser. 
    more » « less
  3. ; ; ; ; ; ; ; ; ; ; et al (, Astronomy & Astrophysics)
    Context. Dual-field interferometric observations with VLTI/GRAVITY sometimes require the use of a binary calibrator. This is a binary star whose individual components remain unresolved by the interferometer, with a separation between 400 and 2000 mas for observations with the Unit Telescopes (UTs), or 1200–3000 mas for the Auxiliary Telescopes (ATs). The separation vector also needs to be predictable to within 10 mas for a proper pointing of the instrument. Aims. No list of properly vetted calibrators was available so far for dual-field observations with VLTI/GRAVITY on the UTs. Our objective is to compile such a list and make it available to the community. Methods. We identified a list of candidates from the Washington Double Star (WDS) catalogue, all with appropriate separations and brightness, scattered over the southern sky. We observed them as part of a dedicated calibration programme, determined whether these objects were true binaries (excluding higher multiplicities resolved interferometrically, but unseen by imaging), and extracted measurements of the separation vectors. We combined these new measurements with those available in the WDS to determine updated orbital parameters for all our vetted calibrators. Results. We compiled a list of 13 vetted binary calibrators for observations with VLTI/GRAVITY on the UTs, and we provide orbital estimates and astrometric predictions for each of them. We show that our list guarantees that there are always two binary calibrators at least at an airmass < 2 in the sky over the Paranal observatory at any point in time. Conclusions. Any principal investigator wishing to use the dual-field mode of VLTI/GRAVITY with the UTs can now refer to this list to select an appropriate calibrator. We encourage the use of whereistheplanet to predict the astrometry of these calibrators, which seamlessly integrates with p2Gravity for VLTI/GRAVITY dual-field observing material preparation. 
    more » « less
  4. ; ; ; ; ; ; ; ; ; ; et al (, Astronomy & Astrophysics)
    Context.Since 2019, GRAVITY has provided direct observations of giant planets and brown dwarfs at separations of down to 95 mas from the host star. Some of these observations have provided the first direct confirmation of companions previously detected by indirect techniques (astrometry and radial velocities). Aims.We want to improve the observing strategy and data reduction in order to lower the inner working angle of GRAVITY in dual-field on-axis mode. We also want to determine the current limitations of the instrument when observing faint companions with separations in the 30–150 mas range. Methods.To improve the inner working angle, we propose a fiber off-pointing strategy during the observations to maximize the ratio of companion-light-to-star-light coupling in the science fiber. We also tested a lower-order model for speckles to decouple the companion light from the star light. We then evaluated the detection limits of GRAVITY using planet injection and retrieval in representative archival data. We compare our results to theoretical expectations. Results.We validate our observing and data-reduction strategy with on-sky observations; first in the context of brown dwarf follow-up on the auxiliary telescopes with HD 984 B, and second with the first confirmation of a substellar candidate around the starGaiaDR3 2728129004119806464. With synthetic companion injection, we demonstrate that the instrument can detect companions down to a contrast of 8 × 10−4(ΔΚ= 7.7 mag) at a separation of 35 mas, and a contrast of 3 × 10−5(ΔΚ= 11 mag) at 100 mas from a bright primary (K< 6.5), for 30 min exposure time. Conclusions.With its inner working angle and astrometric precision, GRAVITY has a unique reach in direct observation parameter space. This study demonstrates the promising synergies between GRAVITY andGaiafor the confirmation and characterization of substellar companions. 
    more » « less
  5. ; ; ; ; ; ; ; (, Monthly Notices of the Royal Astronomical Society)
    ABSTRACT Infrared interferometry is a new frontier for precision ground-based observing, with new instrumentation achieving milliarcsecond (mas) spatial resolutions for faint sources, along with astrometry on the order of 10 microarcseconds (μas). This technique has already led to breakthroughs in the observations of the supermassive black hole at the Galactic centre and its orbiting stars, active galactic nucleus, and exo-planets, and can be employed for studying X-ray binaries (XRBs), microquasars in particular. Beyond constraining the orbital parameters of the system using the centroid wobble and spatially resolving jet discrete ejections on mas scales, we also propose a novel method to discern between the various components contributing to the infrared bands: accretion disc, jets, and companion star. We demonstrate that the GRAVITY instrument on the Very Large Telescope Interferometer should be able to detect a centroid shift in a number of sources, opening a new avenue of exploration for the myriad of transients expected to be discovered in the coming decade of radio all-sky surveys. We also present the first proof-of-concept GRAVITY observation of a low-mass XRB transient, MAXI J1820+070, to search for extended jets on mas scales. We place the tightest constraints yet via direct imaging on the size of the infrared emitting region of the compact jet in a hard state XRB. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Text Encoded Conversion
  • XML
  • Save / Share this Record
  • Send to Email