skip to main content


Title: Experimental and Analytical Prescribed-Time Trajectory Tracking Control of a 7-DOF Robot Manipulator
We present an analytical design and experimental verification of trajectory tracking control of a 7-DOF robot manipulator, which achieves convergence of all tracking errors to the origin within a finite terminal time. A key feature of this control strategy is that this terminal convergence time is explicitly prescribed by the control designer, and is thus independent of the initial conditions of the tracking errors. In order to achieve this beneficial property of the proposed controller, a scaling of the state by a function of time that grows unbounded towards the terminal time is employed. Through Lyapunov analysis, we first demonstrate that the proposed controller achieves regulation of all tracking errors within the prescribed time as well as the uniform boundedness of the joint torques, even in the presence of a matched, non-vanishing disturbance. Then, through both simulation and experiment, we demonstrate that the proposed controller is capable of converging to the desired trajectory within the prescribed time, despite large initial conditions of the tracking errors and a sinusoidal disturbance being applied in each joint.  more » « less
Award ID(s):
1823951
NSF-PAR ID:
10390290
Author(s) / Creator(s):
; ;
Date Published:
Journal Name:
American Control Conference (ACC)
Page Range / eLocation ID:
1941 to 1946
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. Abstract We present an analytical design and experimental verification of trajectory tracking control of a 7-DOF robot manipulator, which achieves convergence of all tracking errors to the origin within a finite terminal time, also referred to as the “settling time.” A key feature of this control strategy is that the settling time is explicitly assigned by the control designer to a value desired, or “prescribed” by the user and that the settling time is independent of the initial conditions and of the reference signal. In order to achieve this beneficial property with the controller, a scaling of the state by a function of time that grows unbounded toward the terminal time is employed. Through Lyapunov analysis, we first demonstrate that the proposed controller achieves regulation of all tracking errors within the prescribed time as well as the uniform boundedness of the joint torques, even in the presence of a matched, nonvanishing disturbance. Then, through both simulation and experiment, we demonstrate that the proposed controller is capable of converging to the desired trajectory within the prescribed time, despite large distance between the initial conditions and the reference trajectory, i.e., in spite of large initial tracking errors, and in spite of a sinusoidal disturbance being applied in each joint. 
    more » « less
  2. We model a three-link fully actuated biped as a hybrid system and propose a prediction-based control algorithm for global tracking of reference trajectories. The proposed control strategy consists of a reference system that generates the desired periodic gait, a virtual system that generates a suitable reference trajectory using prediction, and a tracking control law that steers the biped to the virtual trajectory. The proposed algorithms achieves, in finite time, tracking in two steps. We present mathematical properties that define the main elements in the hybrid predictive controller for achieving convergence to the reference within the first two steps. The results are validated through numerical simulations. 
    more » « less
  3. Abstract

    In this work, we propose a novel adaptive formation control architecture for a group of quadrotor systems, under line‐of‐sight (LOS) distance and relative distance constraints as well as attitude constraints, where the constraint requirements can be both asymmetric and time‐varying in nature. The LOS distance constraint consideration ensures that each quadrotor is not deviating too far away from its desired flight trajectory. The LOS relative inter‐quadrotor distance constraint is to guarantee that the LOS distance between any two quadrotors in the formation is neither too large (which may result in the loss of communication between quadrotors, for example) nor too small (which may result in collision between quadrotors, for example). The attitude constraints make sure that the roll, pitch, and yaw angles of each quadrotor do not deviate too much from the desired profile. Universal barrier functions are adopted in the controller design and analysis, which is a generic framework that can address system with different types of constraints in a unified controller architecture. Furthermore, each quadrotor's mass and inertia are unknown, and the system dynamics are subjected to time‐varying external disturbances. Through rigorous analysis, an exponential convergence rate can be guaranteed on the distance and attitude tracking errors, while all constraints are satisfied during the operation. A simulation example further demonstrates the efficacy of the proposed control framework.

     
    more » « less
  4. This paper presents an inverse kinematic controller using neural networks for trajectory controlling of a delta robot in real-time. The developed control scheme is purely data-driven and does not require prior knowledge of the delta robot kinematics. Moreover, it can adapt to the changes in the kinematics of the robot. For developing the controller, the kinematic model of the delta robot is estimated by using neural networks. Then, the trained neural networks are configured as a controller in the system. The parameters of the neural networks are updated while the robot follows a path to adaptively compensate for modeling uncertainties and external disturbances of the control system. One of the main contributions of this paper is to show that updating the parameters of neural networks offers a smaller tracking error in inverse kinematic control of a delta robot with consideration of joint backlash. Different simulations and experiments are conducted to verify the proposed controller. The results show that in the presence of external disturbance, the error in trajectory tracking is bounded, and the negative effect of joint backlash in trajectory tracking is reduced. The developed method provides a new approach to the inverse kinematic control of a delta robot. 
    more » « less
  5. Abstract This paper is concerned with solving, from the learning-based decomposition control viewpoint, the problem of output tracking with nonperiodic tracking–transition switching. Such a nontraditional tracking problem occurs in applications where sessions for tracking a given desired trajectory are alternated with those for transiting the output with given boundary conditions. It is challenging to achieve precision tracking while maintaining smooth tracking–transition switching, as postswitching oscillations can be induced due to the mismatch of the boundary states at the switching instants, and the tracking performance can be limited by the nonminimum-phase (NMP) zeros of the system and effected by factors such as input constraints and external disturbances. Although recently an approach by combining the system-inversion with optimization techniques has been proposed to tackle these challenges, modeling of the system dynamics and complicated online computation are needed, and the controller obtained can be sensitive to model uncertainties. In this work, a learning-based decomposition control technique is developed to overcome these limitations. A dictionary of input–output bases is constructed offline a priori via data-driven iterative learning first. The input–output bases are used online to decompose the desired output in the tracking sessions and design an optimal desired transition trajectory with minimal transition time under input-amplitude constraint. Finally, the control input is synthesized based on the superpositioning principle and further optimized online to account for system variations and external disturbance. The proposed approach is illustrated through a nanopositioning control experiment on a piezoelectric actuator. 
    more » « less