An official website of the United States government
Magnetic fields with quasi-symmetry are known to provide good confinement of charged particles and plasmas, but the extent to which quasi-symmetry can be achieved in practice has remained an open question. Recent work [M. Landreman and E. Paul, Phys. Rev. Lett. 128, 035001, 2022] reports the discovery of toroidal magnetic fields that are quasi-symmetric to orders-of-magnitude higher precision than previously known fields. We show that these fields can be accurately produced using electromagnetic coils of only moderate engineering complexity, that is, coils that have low curvature and that are sufficiently separated from each other. Our results demonstrate that these new quasi-symmetric fields are relevant for applications requiring the confinement of energetic charged particles for long time scales, such as nuclear fusion. The coils’ length plays an important role for how well the quasi-symmetric fields can be approximated. For the longest coil set considered and a mean field strength of 1 T, the departure from quasi-symmetry is of the order of Earth’s magnetic field. Additionally, we find that magnetic surfaces extend far outside the plasma boundary used by Landreman and Paul, providing confinement far from the core. Simulations confirm that the magnetic fields generated by the new coils confine particles with high kinetic energy substantially longer than previously known coil configurations. In particular, when scaled to a reactor, the best found configuration loses only 0.04% of energetic particles born at midradius when following guiding center trajectories for 200 ms.
more »
« less
Direct computation of magnetic surfaces in Boozer coordinates and coil optimization for quasisymmetry
We propose a new method to compute magnetic surfaces that are parametrized in Boozer coordinates for vacuum magnetic fields. We also propose a measure for quasisymmetry on the computed surfaces and use it to design coils that generate a magnetic field that is quasisymmetric on those surfaces. The rotational transform of the field and complexity measures for the coils are also controlled in the design problem. Using an adjoint approach, we are able to obtain analytic derivatives for this optimization problem, yielding an efficient gradient-based algorithm. Starting from an initial coil set that presents nested magnetic surfaces for a large fraction of the volume, our method converges rapidly to coil systems generating fields with excellent quasisymmetry and low particle losses. In particular for low complexity coils, we are able to significantly improve the performance compared with coils obtained from the standard two-stage approach, e.g. reduce losses of fusion-produced alpha particles born at half-radius from $$17.7\,\%$$ to $$6.6\,\%$$ . We also demonstrate 16-coil configurations with alpha loss $${<}1\,\%$$ and neoclassical transport magnitude $$\epsilon _{\text {eff}}^{3/2}$$ less than approximately $$5\times 10^{-9}$$ .
more »
« less
- Award ID(s):
- 1820852
- PAR ID:
- 10392038
- Date Published:
- Journal Name:
- Journal of Plasma Physics
- Volume:
- 88
- Issue:
- 4
- ISSN:
- 0022-3778
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Stochastic and a posteriori optimization to mitigate coil manufacturing errors in stellarator designAbstract It was recently shown in Wechsung et al (2022 Proc. Natl Acad. Sci. USA 119 e2202084119) that there exist electromagnetic coils that generate magnetic fields, which are excellent approximations to quasi-symmetric fields and have very good particle confinement properties. Using a Gaussian process-based model for coil perturbations, we investigate the impact of manufacturing errors on the performance of these coils. We show that even fairly small errors result in noticeable performance degradation. While stochastic optimization yields minor improvements, it is not possible to mitigate these errors significantly. As an alternative to stochastic optimization, we then formulate a new optimization problem for computing optimal adjustments of the coil positions and currents without changing the shapes of the coil. These a-posteriori adjustments are able to reduce the impact of coil errors by an order of magnitude, providing a new perspective for dealing with manufacturing tolerances in stellarator design.more » « less
-
Abstract Objective.To develop a coil placement optimization pipeline for transcranial magnetic stimulation (TMS) that improves over existing solutions by guaranteeing the feasibility of the solution when double-cone coils are used and/or targets are placed over nonconvex scalp areas like the occipital region.Approach.Our proposed pipeline estimates feasible candidate coil locations by projecting the coil’s geometry over the scalp around the target site and optimizing the coil’s orientation to maximize scalp exposure to coil while avoiding coil-scalp collision. Then, the reciprocity principle is used to select the best position/orientation among candidates and maximize the average electric field (E-field) intensity at the target site. Our pipeline was tested on five magnetic resonance imaging-derived human head models for three different targets (motor cortex, lateral cerebellum, and cerebellar inion) and four coil models (planar coil: MagStim D70; double-cone coils: MagStim DCC, MagVenture Cool-D-B80, and Deymed 120BFV).Main results.Our pipeline returned several feasible solutions for any combination of anatomical target and coil, calculated and screened over 2000 candidates in minutes, and resulted in optimal locations that satisfy the minimum coil-scalp distance, whereas the direct method returned feasible candidates for just one combination of target and coil, i.e. planar coil and convex target over the motor cortex. We also found that, when the objective is to maximize the E-field magnitude, the target-to-scalp extension line is a better axis for coil translation compared to the normal vector at the scalp’s surface, which is commonly used in existing approaches.Significance.We expand the use of numerical optimization for coil placement to double-cone coils, which are rapidly diffusing in research and clinical settings, and novel application domains, e.g. cerebellar TMS and ataxia treatment.more » « less
-
In recent years, there is an increasing interest in noninvasive treatments for neurological disorders like Alzheimer and Depression. Transcranial magnetic stimulation (TMS) is one of the most effective methods used for this purpose. The performance of TMS highly depends on the coils used for the generation of magnetic field and induced electric field particularly their designs affecting depth and focality tradeoff characteristics. Among a variety of proposed and used TMS coil designs, circular coils are commonly used both in research and medical and clinical applications. In current study, we focus on changing the outer and inner sizes (diameter) and winding turns of ring coils and try to reach deeper brain regions without significant field strength decay. The induced electric field and the decay rate of the generated field with depth were studied with finite element method calculations. The results of the performed simulations indicate that larger diameter coils have a larger equivalent field emission aperture and produce larger footprint of induced electric field initially. However, their emission solid angles are smaller and, as a result, the field divergence or the decay rates of the generated field with depth are smaller as well, which give them a good potential to perform better for deep brain stimulation compared with that of smaller coil.more » « less
-
Tiny batteryless sensors are desirable since they create negligible impacts on the operation of the system being monitored or the surrounding environment. Wireless energy transfer for batteryless sensors is challenging since they cannot cooperate with the charger due to the lack of energy. In this paper, a Magnetic Blind Beamforming (MagBB) algorithm is developed for wireless energy transfer for batteryless sensors in inhomogeneous media. Batteryless sensors with randomly orientated coils may experience significant orientation losses and they may not receive any energy from the charger. MagBB uses a set of optimized current vectors to generate rotating magnetic fields which can ensure that coils on batteryless sensors with arbitrary orientations can receive sufficient voltages for charging. It does not require any information regarding the batteryless sensor's coil orientation or location. The efficiency of MagBB is proven by extensive numerical simulations.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1017/S0022377822000563
