skip to main content

This content will become publicly available on April 1, 2024

Title: Mechanical Characterization of Compliant Cellular Robots. Part II: Active Strain
Abstract Modular active cell robots (MACROs) is a design approach in which a large number of linear actuators and passive compliant joints are assembled to create an active structure with a repeating unit cell. Such a mesh-like robotic structure can be actuated to achieve large deformation and shape-change. In this two-part paper, we use finite element analysis (FEA) to model the deformation behavior of different MACRO mesh topologies and evaluate their passive and active mechanical characteristics. In Part I, we presented the passive stiffness characteristics of different MACRO meshes. In this Part II of the paper, we investigate the active strain characteristics of planar MACRO meshes. Using FEA, we quantify and compare the strains generated for the specific choice of MACRO mesh topology and further for the specific choice of actuators actuated in that particular mesh. We simulate a series of actuation modes that are based on the angular orientation of the actuators within the mesh and show that such actuation modes result in deformation that is independent of the size of the mesh. We also show that there exists a subset of such actuation modes that spans the range of deformation behavior. Finally, we compare the actuation effort required more » to actuate different MACRO meshes and show that the actuation effort is related to the nodal connectivity of the mesh. « less
; ;
Award ID(s):
Publication Date:
Journal Name:
Journal of Mechanisms and Robotics
Sponsoring Org:
National Science Foundation
More Like this
  1. Abstract Modular active cell robots (MACROs) are a design paradigm for modular robotic hardware that uses only two components, namely actuators and passive compliant joints. Under the MACRO approach, a large number of actuators and joints are connected to create mesh-like cellular robotic structures that can be actuated to achieve large deformation and shape change. In this two-part paper, we study the importance of different possible mesh topologies within the MACRO framework. Regular and semi-regular tilings of the plane are used as the candidate mesh topologies and simulated using finite element analysis (FEA). In Part 1, we use FEA to evaluate their passive stiffness characteristics. Using a strain-energy method, the homogenized material properties (Young's modulus, shear modulus, and Poisson's ratio) of the different mesh topologies are computed and compared. The results show that the stiffnesses increase with increasing nodal connectivity and that stretching-dominated topologies have higher stiffness compared to bending-dominated ones. We also investigate the role of relative actuator-node stiffness on the overall mesh characteristics. This analysis shows that the stiffness of stretching-dominated topologies scales directly with their cross-section area whereas bending-dominated ones do not have such a direct relationship.
  2. The Finite Element Method (FEM) is widely used to solve discrete Partial Differential Equations (PDEs) in engineering and graphics applications. The popularity of FEM led to the development of a large family of variants, most of which require a tetrahedral or hexahedral mesh to construct the basis. While the theoretical properties of FEM basis (such as convergence rate, stability, etc.) are well understood under specific assumptions on the mesh quality, their practical performance, influenced both by the choice of the basis construction and quality of mesh generation, have not been systematically documented for large collections of automatically meshed 3D geometries. We introduce a set of benchmark problems involving most commonly solved elliptic PDEs, starting from simple cases with an analytical solution, moving to commonly used test problem setups, and using manufactured solutions for thousands of real-world, automatically meshed geometries. For all these cases, we use state-of-the-art meshing tools to create both tetrahedral and hexahedral meshes, and compare the performance of different element types for common elliptic PDEs. The goal of this benchmark is to enable comparison of complete FEM pipelines, from mesh generation to algebraic solver, and exploration of relative impact of different factors on the overall system performance. Asmore »a specific application of our geometry and benchmark dataset, we explore the question of relative advantages of unstructured (triangular/ tetrahedral) and structured (quadrilateral/hexahedral) discretizations. We observe that for Lagrange-type elements, while linear tetrahedral elements perform poorly, quadratic tetrahedral elements perform equally well or outperform hexahedral elements for our set of problems and currently available mesh generation algorithms. This observation suggests that for common problems in structural analysis, thermal analysis, and low Reynolds number flows, high-quality results can be obtained with unstructured tetrahedral meshes, which can be created robustly and automatically. We release the description of the benchmark problems, meshes, and reference implementation of our testing infrastructure to enable statistically significant comparisons between different FE methods, which we hope will be helpful in the development of new meshing and FEA techniques.« less
  3. Soft intelligent structures that are programmed to reshape and reconfigure under magnetic field can find applications such as in soft robotics and biomedical devices. Here, a new class of smart elastomeric architectures that undergo complex reconfiguration and shape change in applied magnetic fields, while floating on the surface of water, is reported. These magnetoactive soft actuators are fabricated by 3D printing with homocomposite silicone capillary ink. The ultrasoft actuators easily deform by the magnetic force exerted on carbonyl iron particles embedded in the silicone, as well as lateral capillary forces. The tensile and compressive moduli of the actuators are easily determined by their topological design through 3D printing. As a result, their responses can be engineered by the interplay of the intensity of the magnetic field gradient and the programmable moduli. 3D printing allows us to fabricate soft architectures with different actuation modes, such as isotropic/anisotropic contraction and multiple shape changes, as well as functional reconfiguration. Meshes that reconfigure in magnetic fields and respond to external stimuli by reshaping could serve as active tissue scaffolds for cell cultures and soft robots mimicking creatures that live on the surface of water.
  4. Handheld haptic devices are often limited in rendering capability, as compared to traditional grounded devices. Strenuous design criteria on weight, size, power consumption, and the ungrounded nature of handheld devices, can drive designers to prioritize actuator force or torque production over other components of dynamic range like bandwidth, transparency, and the range of stable impedances. Hybrid actuation, the use of passive and active actuators together, has the potential to increase the dynamic range of handheld haptic devices due to the large passive torque capability, the stabilizing effects of passive actuators, the high bandwidth of conventional DC servomotors, and the synergy between actuators. However, to date the use of hybrid actuation has been limited due to the highly nonlinear torque characteristics of available passive actuators that result in poor rendering accuracy. This paper describes a hybrid actuation approach and novel control topology which aims to solve actuation challenges associated with nonlinear passive actuators in hybrid and handheld haptic devices. The performance of the device is assessed experimentally, and the approach is compared to existing handheld devices.
  5. Steady-state traveling waves in structures have been previously investigated for a variety of purposes including propulsion of objects and agitation of a surrounding medium. In the field of additive manufacturing, powder bed fusion (PBF) is a commonly used process that uses heat to fuse regions of metallic or polymer powders within a loose bed. PBF processes require post-process removal of loose powder, which can be difficult when blind holes or complex internal geometry are present in the fabricated part. Here, a preliminary investigation of a simple part is conducted examining the use of traveling waves for post-process de-powdering of additively manufactured specimens. The generation of steady-state traveling waves in a structure is accomplished through excitation at a frequency between two adjacent resonant frequencies of the structure, resulting in two-mode excitation. This excitation can be generated by bonded piezoceramic elements actuated by a sinusoidal voltage signal. The response of the structure is affected by the parameters of the excitation, such as the particular frequency of the voltage signal, the placement of the piezoceramic actuators, and the phase difference in the signals applied to different actuators. Careful selection of these parameters allows adjustment of the quality, wavelength, and wave speed of themore »resulting traveling waves. In this work, open-top rectangular box specimens composed of sintered nylon powder and coated with fine sand are used to represent freshly fabricated parts yet-to-be cleaned of un-sintered powder. Steady-state traveling waves are excited in the specimens while variations in the frequency content and phase differences between actuation points of the excitation are used to affect the characteristics of the dynamic response. The effectiveness of several response types for the purpose of moving un-sintered nylon powder within the specimens is investigated.« less