An official website of the United States government
Abstract The surface topography of diamond coatings strongly affects surface properties such as adhesion, friction, wear, and biocompatibility. However, the understanding of multi-scale topography, and its effect on properties, has been hindered by conventional measurement methods, which capture only a single length scale. Here, four different polycrystalline diamond coatings are characterized using transmission electron microscopy to assess the roughness down to the sub-nanometer scale. Then these measurements are combined, using the power spectral density (PSD), with conventional methods (stylus profilometry and atomic force microscopy) to characterize all scales of topography. The results demonstrate the critical importance of measuring topography across all length scales, especially because their PSDs cross over one another, such that a surface that is rougher at a larger scale may be smoother at a smaller scale and vice versa. Furthermore, these measurements reveal the connection between multi-scale topography and grain size, with characteristic scaling behavior at and slightly below the mean grain size, and self-affine fractal-like roughness at other length scales. At small (subgrain) scales, unpolished surfaces exhibit a common form of residual roughness that is self-affine in nature but difficult to detect with conventional methods. This approach of capturing topography from the atomic- to the macro-scale is termedcomprehensive topography characterization, and all of the topography data from these surfaces has been made available for further analysis by experimentalists and theoreticians. Scientifically, this investigation has identified four characteristic regions of topography scaling in polycrystalline diamond materials.
more »
« less
Surface topography as a material parameter
AbstractMaterials science is about understanding the relationship between a material’s structure and its properties—in the sphere of mechanical behavior, this includes elastic modulus, yield strength, and other bulk properties. We show in this issue that, analogously, a material’s surface structure governs its surface properties—such as adhesion, friction, and surface stiffness. For bulk materials, microstructure is a critical component of structure; for surfaces, the structure is governed largely by surface topography. The articles in this issue cover the latest understanding of these structure–property connections for surfaces. This includes both the theoretical basis for how properties depend on topography, as well as the latest understanding of how surface topography emerges, how to measure and understand topography-dependent properties, and how to engineer surfaces to improve performance. The present article frames the importance of surface topography and its effect on properties; it also outlines some of the critical knowledge gaps that impede progress toward optimally performing surfaces. Graphical abstract
more »
« less
- Award ID(s):
- 1844739
- PAR ID:
- 10394551
- Publisher / Repository:
- Cambridge University Press (CUP)
- Date Published:
- Journal Name:
- MRS Bulletin
- Volume:
- 47
- Issue:
- 12
- ISSN:
- 0883-7694
- Page Range / eLocation ID:
- p. 1205-1210
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
PurposeThe ability to use laser powder bed fusion (LPBF) to print parts with tailored surface topography could reduce the need for costly post-processing. However, characterizing the as-built surface topography as a function of process parameters is crucial to establishing linkages between process parameters and surface topography and is currently not well understood. The purpose of this study is to measure the effect of different LPBF process parameters on the as-built surface topography of Inconel 718 parts. Design/methodology/approachInconel 718 truncheon specimens with different process parameters, including single- and double contour laser pass, laser power, laser scan speed, build orientation and characterize their as-built surface topography using deterministic and areal surface topography parameters are printed. The effect of both individual process parameters, as well as their interactions, on the as-built surface topography are evaluated and linked to the underlying physics, informed by surface topography data. FindingsDeterministic surface topography parameters are more suitable than areal surface topography parameters to characterize the distinct features of the as-built surfaces that result from LPBF. The as-built surface topography is strongly dependent on the built orientation and is dominated by the staircase effect for shallow orientations and partially fused metal powder particles for steep orientations. Laser power and laser scan speed have a combined effect on the as-built surface topography, even when maintaining constant laser energy density. Originality/valueThis work addresses two knowledge gaps. (i) It introduces deterministic instead of areal surface topography parameters to unambiguously characterize the as-built LPBF surfaces. (ii) It provides a methodical study of the as-built surface topography as a function of individual LPBF process parameters and their interaction effects.more » « less
-
Abstract Materials that blend physical properties that are usually mutually exclusive could facilitate devices with novel functionalities. For example, the doped perovskite alkaline earth stannates BaSnO 3 and SrSnO 3 show the intriguing combination of high light transparency and high electrical conductivity. Understanding such emergent physics requires deep insight into the materials’ electronic structures. Moreover, the band structure at the surfaces of those materials can deviate significantly from their bulk counterparts, thereby unlocking novel physical phenomena. Employing angle-resolved photoemission spectroscopy and ab initio calculations, we reveal the existence of a 2-dimensional metallic state at the SnO 2 -terminated surface of 1% La-doped BaSnO 3 thin films. The observed surface state is characterized by a distinct carrier density and a lower effective mass compared to the bulk conduction band, of about 0.12 m e . These particular surface state properties place BaSnO 3 among the materials suitable for engineering highly conductive transition metal oxide heterostructures.more » « less
-
Abstract Polydimethylsiloxane (PDMS)—the simplest and most common silicone compound—exemplifies the central characteristics of its class and has attracted tremendous research attention. The development of PDMS‐based materials is a vivid reflection of the modern industry. In recent years, PDMS has stood out as the material of choice for various emerging technologies. The rapid improvement in bulk modification strategies and multifunctional surfaces has enabled a whole new generation of PDMS‐based materials and devices, facilitating, and even transforming enormous applications, including flexible electronics, superwetting surfaces, soft actuators, wearable and implantable sensors, biomedicals, and autonomous robotics. This paper reviews the latest advances in the field of PDMS‐based functional materials, with a focus on the added functionality and their use as programmable materials for smart devices. Recent breakthroughs regarding instant crosslinking and additive manufacturing are featured, and exciting opportunities for future research are highlighted. This review provides a quick entrance to this rapidly evolving field and will help guide the rational design of next‐generation soft materials and devices.more » « less
-
Abstract We describe an integrated modelling approach to accelerate the search for novel, single-phase, multicomponent materials with high magnetocrystalline anisotropy (MCA). For a given system we predict the nature of atomic ordering, its dependence on the magnetic state, and then proceed to describe the consequent MCA, magnetisation, and magnetic critical temperature (Curie temperature). Crucially, within our modelling framework, the same ab initio description of a material’s electronic structure determines all aspects. We demonstrate this holistic method by studying the effects of alloying additions in FeNi, examining systems with the general stoichiometries Fe4Ni3Xand Fe3Ni4X, for additives includingX = Pt, Pd, Al, and Co. The atomic ordering behaviour predicted on adding these elements, fundamental for determining a material’s MCA, is rich and varied. Equiatomic FeNi has been reported to require ferromagnetic order to establish the tetragonal L10order suited for significant MCA. Our results show that when alloying additions are included in this material, annealing in an applied magnetic field and/or below a material’s Curie temperature may also promote tetragonal order, along with an appreciable effect on the predicted hard magnetic properties.more » « less
