skip to main content


Title: Ultrafast Transient Absorption Spectroscopy of Inkjet-Printed Graphene and Aerosol Gel Graphene Films: Effect of Oxygen and Morphology on Carrier Relaxation Dynamics
Award ID(s):
1935676
NSF-PAR ID:
10396599
Author(s) / Creator(s):
; ; ; ; ; ; ;
Date Published:
Journal Name:
The Journal of Physical Chemistry C
Volume:
126
Issue:
18
ISSN:
1932-7447
Page Range / eLocation ID:
7949 to 7955
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. Controlling the Dirac point voltage of graphene is essential for realizing various practical applications of graphene. Here, control of the doping state is achieved in flexible graphene field effect transistors (GFETs) by applying mechanical bending stress. By gradually increasing the bending strain (the decrease of upward/downward bending radius), the Dirac point ( V Dirac ) linearly shifts to left/right, which is induced by the flexoelectric effect of the ferroelectric Pb 0.92 La 0.08 Zr 0.52 Ti 0.48 O 3 (PLZT) gate. In addition, a superior mechanical antifatigue character is obtained in the flexible GFETs, and the doping effect is recoverable. The sensitivity to strain and high bending stability not only offer an easy, controllable and nonintrusive method to obtain a specific doping level in graphene for flexible electric devices, but also highlight the enormous potential of the flexible ferroelectric PLZT-gated GFETs as wearable sensors. 
    more » « less
  2. null (Ed.)
  3. ABSTRACT CVD graphene growth typically uses commercially available cold-rolled copper foils, which includes a rich topography with scratches, dents, pits, and peaks. The graphene grown on this topography, even after annealing the foil, tends to include and reflect these topographic features. Further, the transfer of such CVD graphene to a flat substrate using a polymer transfer method also introduces wrinkles. Here, we examine an electropolishing technique for reducing native foil defects, characterize the resulting foil surface, grow single-crystal graphene on the polished foil, and examine the quality of the graphene for such defects. 
    more » « less
  4. Selenium (Se) cathodes are an exciting emerging high energy density storage system for potassium-ion batteries (KIB), where potassiation reactions are less understood. Here, we present an atomic-level investigation of a KxSe cathode enclosed in hexagonal lattices of carbon (C) characteristic of a layered graphene matrix and multiwalled carbon nanotubes (MW-CNTs). Microstructural changes directed by the graphene–substrate in the KxSe cathode are contrasted with those in the graphene-free cathode. Graphene’s binding affinity for long-chain polyselenides (Se3 = −2.82 eV and Se2 = −2.646 eV) at low K concentrations and ability to induce enhanced reactivity between Se and K at high K concentrations are investigated. Furthermore, intercalation voltage for graphene-enclosed KxSe cathode reaction intermediates is calculated with K2Se as the final discharged product. Our results indicate a single-step reaction near a voltage of 1.55 V between K and Se cathode. Findings in the paper suggest that operating at higher voltages (∼2 V) could result in the formation of reaction intermediates where intercalation/deintercalation of K could be a challenge, and therefore cause irreversible capacity losses in the battery. The primary issue here is the modulating favorability of graphene surface toward discharging of Se cathode due to its differential preferences for K–Se reaction intermediates. A comparison with a graphene-free cathode highlights the substantial changes a van der Waals (vdW) graphene interface can bring in the atomic structure and electrochemistry of the KxSe cathode. 
    more » « less