An official website of the United States government
Magmatic and hydrothermal systems are intimately linked, significantly overlapping through time but persisting in different parts of a system. New preliminary U-Pb and trace element petrochronology from zircon and titanite demonstrate the protracted and episodic record of magmatic and hydrothermal processes in the Alta stock–Little Cottonwood stock plutonic and volcanic system. This system spans the upper ~11.5 km of the crust and includes a large composite pluton (e.g., Little Cottonwood stock), dike-like conduit (e.g., Alta stock), and surficial volcanic edifices (East Traverse and Park City volcanic units). A temperature–time path for the system was constructed using U-Pb and tetravalent cation thermometry to establish a record of >10 Myr of pluton emplacement, magma transport, volcanic eruption, and coeval hydrothermal circulation. Zircons from the Alta and Little Cottonwood stocks recorded a single population of apparent temperatures of ~625 ± 35 °C, while titanite apparent temperatures formed two distinct populations interpreted as magmatic (~725 ± 50 °C) and hydrothermal (~575 ± 50 °C). The spatial and temporal variations required episodic magma input, which overlapped in time with hydrothermal fluid flow in the structurally higher portions of the system. The hydrothermal system was itself episodic and migrated within the margin of the Alta stock and its aureole through time, and eventually focused at the contact of the Alta stock. First-order estimates of magma flux in this system suggest that the volcanic flux was 2–5× higher than the intrusive magma accumulation rate throughout its lifespan, consistent with intrusive volcanic systems around the world.
more »
« less
Titanite geochemistry and textures: Implications for magmatic and post-magmatic processes in the Notch Peak and Little Cottonwood granitic intrusions, Utah
Abstract Textural and compositional variations in titanite constrain the roles of magma mixing and hydrothermal alteration in two plutons in central Utah: the Jurassic Notch Peak and the Oligocene Little Cottonwood stocks. In the Notch Peak intrusion, magmatic titanite grains usually have oscillatory zones combined with BSE-bright sector zones, in some cases surrounding simple unzoned cores. These grains are frequently overprinted by hydrothermal titanite with low concentrations of high field strength elements (HFSE). Magmatic titanite has an average δ18O of 6.0‰ and post-magmatic titanite is 6.2‰, as analyzed by SIMS. Average Zr-in-titanite temperatures are also similar, with 718 °C for magmatic and 711 °C for hydrothermal titanite. These observations indicate simple magmatic growth, followed by hydrothermal alteration by magmatic fluids. Titanite in aplite dikes and sills has lower concentrations of all trace elements except F. Many titanite grains in the aplites have late overgrowths of high-Fe titanite. This high-Fe titanite has δ18O of 6‰ and an average Zr-in-titanite temperature of 718 °C and likely precipitated from a last flush of exsolved magmatic water enriched in Cl and Fe. Titanite in the Little Cottonwood stock typically has distinct patchy cores with rounded and embayed ilmenite inclusions. Mafic enclaves have abundant titanite that is similar in texture and δ18O (5.1‰) to titanite in the host (δ18O = 4.9‰), but it has a slightly higher average Zr-in-titanite temperature (731 vs. 717 °C). The patchy cores in the enclaves have the highest average Zr-in-titanite temperature (759 °C) and distinctive REE patterns. The textural and compositional data indicate that a hotter, more reduced, ilmenite-bearing mafic magma mixed into an oxidized felsic magma, destabilizing existing ilmenite and allowing crystallization of titanite. In the granodiorite and in the enclaves, hydrothermal growth of titanite is evidenced by distinct narrow rims as well as anhedral titanite that grew between sheets of chloritized biotite. Secondary hydrothermal titanite typically has lower concentrations of most HFSE, but is relatively enriched in F, Mg, Mo, and U, and it has higher Nb/Ta and lower Th/U ratios. Post-magmatic titanite also has strikingly different REE patterns than magmatic titanite, including the absence of pronounced Eu anomalies and lower REE abundances. These chemical features are controlled by element solubilities in aqueous fluids. In most cases, hydrothermal titanite has δ18O values similar to magmatic titanite, indicating alteration and recrystallization from exsolved magmatic fluids. The involvement of meteoric water with low δ18O is evident locally; individual spots have δ18O as low as 1.7‰ in the Little Cottonwood stock. Titanite compositions and textures provide important insights into the origins of granitic rocks and can be used to distinguish separate batches of magma, gauge the evolution of magmatic rocks, assess mixing processes, and infer compositions of mixing components. Because titanite also forms hydrothermally, it retains hints about the composition, temperature, and oxygen fugacity of the hydrothermal fluids and reveals details about titanite-forming reactions. However, the Al-in-titanite geobarometer does not yield realistic pressures of crystallization and the use of titanite as a geochronometer is compromised by the development of U-rich hydrothermal titanite.
more »
« less
- Award ID(s):
- 2004618
- PAR ID:
- 10398110
- Date Published:
- Journal Name:
- American Mineralogist
- Volume:
- 108
- Issue:
- 2
- ISSN:
- 0003-004X
- Page Range / eLocation ID:
- 226 to 248
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Granite textures are usually assumed to be unmodified igneous features, but titanite petrochronoloy records a progression from magmatic crystallization to fluid-mediated automorphism in the Little Cottonwood stock (LCS). The Wasatch Mountains expose a profile through the 36-25 Ma Wasatch Igneous Belt owing to 20° eastward tilt in the footwall of the Wasatch Fault. The LCS, Alta stock (AS) and their contact aureoles form an integrated magmatic-hydrothermal system that underpinned the cogenetic Keetley Volcanics (KV). The AS (~3-5 km depth) likely formed a conduit from the deeper LCS (~6-11 km) to the KV. The LCS formed in two phases: 1) ~36–33 Ma, coeval with the AS and KV, and 2) ~32–25 Ma, younger than KV and AS but at this time hydrothermal fluid infiltrated the AS to form endoskarn. LCS titanite was analyzed by LASS-ICP-MS in 16 samples of unaltered granite (s.l.) collected along transects from the roof on the east to the deepest exposures on the west and from the northern wall to the southern wall. Principal component analysis of titanite trace-element data distinguishes a magmatic group with high REE and a metamorphic group with low REE and high W, Sr, Sc, V, Cr, Fe, Al, and Pb. The metamorphic group forms BSE-dark rims that are variably developed but present in every sample. U-Pb dates indicate that, across the sample suite, there is nearly complete age overlap between magmatic and metamorphic titanite. We interpret chemical zoning of the titanite to record magmatic crystallization followed by hydrothermal modification of primary minerals. The age overlap suggests that solidified increments were infiltrated by fluid released by crystallization of nearby later increments. Infiltrating fluids also affected the feldspars: although apparently intact when examined optically, CL images reveal the feldspars to have been shattered, then healed by dissolution-reprecipitation. Exsolution of Ab component from K-feldspar to form albite selvages against adjacent plagioclase probably was part of the same process, as were biotite chloritization and exsolution of Ti from primary titanomagnetite to grow metamorphic titanite. Taken together, observations from titanite and major phases are consistent with fluid-mediated submagmatic re-equilibration throughout incremental assembly of the LCS.more » « less
-
The Wasatch Mountains expose an oblique profile through the Alta and Little Cottonwood stocks (LCS) owing to 20° eastward tilt in the footwall of the Wasatch Fault. The cross section spans the upper 11 km of the crust beneath the Eocene paleosurface exposed in Park City, UT. Previous titanite and zircon U-Pb petrochronology established 10 Myr of simultaneous magmatism and hydrothermal metamorphism both in the deeper LCS and in the shallower Alta stock which likely was the conduit between the LCS and cogenetic Keetley volcanic deposits. Hydrothermal metamorphism within and surrounding the Alta stock was synchronous with and most likely driven by emplacement of LCS and migrated from within the Alta stock and contact aureole to margins of the stock suggesting an evolving permeability structure during and after the crystallization of the LCS. New titanite U-Pb petrochronology from the LCS and stock-bounding Wasatch Fault Zone indicate that 1) the LCS was constructed in two phases, an earlier ~36–34 Ma and a younger ~32–25 Ma phase, 2) the presence of both magmatic and hydrothermal titanite as recorded by trace element chemistry, and 3) a pre-Wasatch Fault ductile shear zone likely accommodated magma emplacement at crustal strain rates beginning around 32 Ma. Principal component analysis of LCS trace element data distinguishes two end-member titanite populations along the first component axis: a magmatic population with high REE and a metamorphic population with low REE and high Sr, Sc, V, Cr, Fe, Al, Pb, and particularly W. The second principal component is defined by variance in the REE interpreted to record fractionation by titanite crystallization from melt. The initial ~36–34 Ma phase of LCS construction overlaps with magmatism within the Alta stock conduit and Keetley volcanic rocks and is only found on the western, deepest portion of the LCS. Trace element chemistry of ~36–34 Ma titanites lacks the low REE, high W population suggesting that hydrothermal water released by crystallizing magma did not percolate through these rocks. Low REE, high W titanites are restricted to the structurally higher second phase of the LCS. Despite this relationship, not all samples in the second LCS phase contain the hydrothermal population, which suggests spatially complex magma emplacement and/or later hydrothermal permeability structure.more » « less
-
Lode gold deposits, which are currently the world’s major gold supply, have been shown to be generated mostly by phase separation of metamorphic fluids and/or interaction between these fluids and wall rocks. Here we use garnet oxygen isotopes by secondary ion mass spectrometry to document the crucial role of magmatic hydrothermal fluids and their mixing with meteoric water in the formation of the world-class Dongping gold deposit in the North China Craton. Garnet grains from quartz veins of various paragenetic stages and the mineralized alteration envelope at Dongping have dynamic δ 18 O variations of 3.8 to −11.0‰, with large intragrain fluctuations up to 5.3‰. These values correspond to calculated δ 18 O values of 6.1 to −9.1‰ for the hydrothermal fluids from which the garnet formed. The isotope data, notably the cyclic alternation in δ 18 O within individual garnet grains, are best interpreted to reflect multiple pulses of magmatically derived fluids and subsequent mixing of each pulse with variable amounts of meteoric water. The results presented here allow us to quantify the significant interplay between magmatic hydrothermal fluids and meteoric water that spanned the entire mineralization history and triggered gold deposition of a lode gold deposit. This study highlights the potential use of in situ oxygen isotope analysis of garnet in tracing the origin and evolution of hydrothermal fluids in the Earth’s crust that may have formed other giant ore deposits.more » « less
-
Loveringite, a rare member of the crichtonite group with nominal formula (Ca,Ce)(Ti,Fe,Cr,Mg)21O38, was found in the Khamal layered mafic intrusion, the first known locality for this mineral in the Arabian Shield. The Khamal intrusion, a large post-collisional mafic complex, is lithologically zoned, bottom to top, from olivine gabbro through gabbronorite, hornblende gabbro, anorthosite, and diorite to quartz diorite. Loveringite is found near the base of the complex, as an intercumulus phase in olivine gabbro. Most loveringite grains are homogeneous, although a few grains are zoned from cores rich in TiO2, Al2O3, Cr2O3, and CaO towards rims rich in FeO*, ZrO2, V2O3, Y2O3, and rare earth elements (REE). Petrographic relations indicate that loveringite formed after crystallization of cumulus olivine, pyroxenes, and plagioclase. Anhedral and corroded crystals of loveringite are surrounded by reaction rims of Mn-bearing ilmenite and baddeleyite, suggesting that the residual liquid evolved into and subsequently out of the stability field of loveringite. The budget of incompatible elements (Zr, Hf, REE, U, and Th) hosted in loveringite is anomalous for a primitive mafic liquid. Saturation in loveringite is likely the result of early contamination of the primary melt by anatexis of country rock, followed by isolation of evolving liquid in intercumulus space that restricted communication with the overlying magma chamber. The zoned crystals likely reflect diffusive equilibration between residual loveringite grains and their reaction rims of ilmenite.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.2138/am-2022-8241
