More Like this

1. Deep Learning-Based Data Fusion Method for In Situ Porosity Detection in Laser-Based Additive Manufacturing

   https://doi.org/10.1115/1.4048957  

   Tian, Qi ; Guo, Shenghan ; Melder, Erika ; Bian, Linkan ; Guo, Weihong “Grace” ( April 2021 , Journal of Manufacturing Science and Engineering)

   null (Ed.)

   Abstract Laser-based additive manufacturing (LBAM) provides unrivalled design freedom with the ability to manufacture complicated parts for a wide range of engineering applications. Melt pool is one of the most important signatures in LBAM and is indicative of process anomalies and part defects. High-speed thermal images of the melt pool captured during LBAM make it possible for in situ melt pool monitoring and porosity prediction. This paper aims to broaden current knowledge of the underlying relationship between process and porosity in LBAM and provide new possibilities for efficient and accurate porosity prediction. We present a deep learning-based data fusion method to predict porosity in LBAM parts by leveraging the measured melt pool thermal history and two newly created deep learning neural networks. A PyroNet, based on Convolutional Neural Networks, is developed to correlate in-process pyrometry images with layer-wise porosity; an IRNet, based on Long-term Recurrent Convolutional Networks, is developed to correlate sequential thermal images from an infrared camera with layer-wise porosity. Predictions from PyroNet and IRNet are fused at the decision-level to obtain a more accurate prediction of layer-wise porosity. The model fidelity is validated with LBAM Ti–6Al–4V thin-wall structure. This is the first work that manages to fuse pyrometer data and infrared camera data for metal additive manufacturing (AM). The case study results based on benchmark datasets show that our method can achieve high accuracy with relatively high efficiency, demonstrating the applicability of the method for in situ porosity detection in LBAM. 

   more » « less
2. Detecting balling defects using multisource transfer learning in wire arc additive manufacturing

   https://doi.org/10.1093/jcde/qwad067  

   Shin, Seung-Jun ; Hong, Sung-Ho ; Jadhav, Sainand ; Kim, Duck Bong ( July 2023 , Journal of Computational Design and Engineering)

   Wire arc additive manufacturing (WAAM) has gained attention as a feasible process in large-scale metal additive manufacturing due to its high deposition rate, cost efficiency, and material diversity. However, WAAM induces a degree of uncertainty in the process stability and the part quality owing to its non-equilibrium thermal cycles and layer-by-layer stacking mechanism. Anomaly detection is therefore necessary for the quality monitoring of the parts. Most relevant studies have applied machine learning to derive data-driven models that detect defects through feature and pattern learning. However, acquiring sufficient data is time- and/or resource-intensive, which introduces a challenge to applying machine learning-based anomaly detection. This study proposes a multisource transfer learning method that generates anomaly detection models for balling defect detection, thus ensuring quality monitoring in WAAM. The proposed method uses convolutional neural network models to extract sufficient image features from multisource materials, then transfers and fine-tunes the models for anomaly detection in the target material. Stepwise learning is applied to extract image features sequentially from individual source materials, and composite learning is employed to assign the optimal frozen ratio for converging transferred and present features. Experiments were performed using a gas tungsten arc welding-based WAAM process to validate the classification accuracy of the models using low-carbon steel, stainless steel, and Inconel.

    

   more » « less
3. Personalized feature extraction for manufacturing process signature characterization and anomaly detection

   https://doi.org/10.1016/j.jmsy.2024.04.002  

   Shi, Naichen ; Guo, Shenghan ; Al Kontar, Raed ( June 2024 , Journal of Manufacturing Systems)

   Manufacturing process signatures reflect the process stability and anomalies that potentially lead to detrimental effects on the manufactured outcomes. Sensing technologies, especially in-situ image sensors, are widely used to capture process signatures for diagnostics and prognostics. This imaging data is crucial evidence for process signature characterization and monitoring. A critical aspect of process signature analysis is identifying the unique patterns in an image that differ from the generic behavior of the manufacturing process in order to detect anomalies. It is equivalent to separating the “unique features” and process-wise (or phase-wise) “shared features” from the same image and recognizing the transient anomaly, i.e., recognizing the outlier “unique features”. In state-of-the-art literature, image-based process signature analysis relies on conventional feature extraction procedures, which limit the “view” of information to each image and cannot decouple the shared and unique features. Consequently, the features extracted are less interpretable, and the anomaly detection method cannot distinguish the abnormality in the current process signature from the process-wise evolution. Targeting this limitation, this study proposes personalized feature extraction (PFE) to decouple process-wise shared features and transient unique features from a sensor image and further develops process signature characterization and anomaly detection strategies. The PFE algorithm is designed for heterogeneous data with shared features. Supervised and unsupervised anomaly detection strategies are developed upon PFE features to remove the shared features from a process signature and examine the unique features for abnormality. The proposed method is demonstrated on two datasets (i) selected data from the 2018 AM Benchmark Test Series from the National Institute of Standards and Technology (NIST), and (ii) thermal measurements in additive manufacturing of a thin-walled structure of Ti–6Al–4V. The results highlight the power of personalized modeling in extracting features from manufacturing imaging data. 

   more » « less
4. Imaging systems and techniques for fusion-based metal additive manufacturing: a review

   https://doi.org/10.3389/fmtec.2023.1271190  

   Balhara, Himanshu ; Karthikeyan, Adithyaa ; Hanchate, Abhishek ; Nakkina, Tapan Ganatma ; Bukkapatnam, Satish T. ( December 2023 , Frontiers in Manufacturing Technology)

   This study presents an overview and a few case studies to explicate the transformative power of diverse imaging techniques for smart manufacturing, focusing largely on variousin-situandex-situimaging methods for monitoring fusion-based metal additive manufacturing (AM) processes such as directed energy deposition (DED), selective laser melting (SLM), electron beam melting (EBM).In-situimaging techniques, encompassing high-speed cameras, thermal cameras, and digital cameras, are becoming increasingly affordable, complementary, and are emerging as vital for real-time monitoring, enabling continuous assessment of build quality. For example, high-speed cameras capture dynamic laser-material interaction, swiftly detecting defects, while thermal cameras identify thermal distribution of the melt pool and potential anomalies. The data gathered fromin-situimaging are then utilized to extract pertinent features that facilitate effective control of process parameters, thereby optimizing the AM processes and minimizing defects. On the other hand,ex-situimaging techniques play a critical role in comprehensive component analysis. Scanning electron microscopy (SEM), optical microscopy, and 3D-profilometry enable detailed characterization of microstructural features, surface roughness, porosity, and dimensional accuracy. Employing a battery of Artificial Intelligence (AI) algorithms, information from diverse imaging and other multi-modal data sources can be fused, and thereby achieve a more comprehensive understanding of a manufacturing process. This integration enables informed decision-making for process optimization and quality assurance, as AI algorithms analyze the combined data to extract relevant insights and patterns. Ultimately, the power of imaging in additive manufacturing lies in its ability to deliver real-time monitoring, precise control, and comprehensive analysis, empowering manufacturers to achieve supreme levels of precision, reliability, and productivity in the production of components.

    

   more » « less
5. A Graph Theoretic Approach for Near Real-Time Prediction of Part-Level Thermal History in Metal Additive Manufacturing Processes

   https://doi.org/10.1115/MSEC2019-2875  

   Yavari, Reza ; Cole, Kevin D. ; Rao, Prahalad ( June 2019 , ASME Manufacturing Science and Engineering Conference)

   The goal of this work is to predict the effect of part geometry and process parameters on the instantaneous spatial distribution of heat, called the heat flux or thermal history, in metal parts as they are being built layer-by-layer using additive manufacturing (AM) processes. In pursuit of this goal, the objective of this work is to develop and verify a graph theory-based approach for predicting the heat flux in metal AM parts. This objective is consequential to overcome the current poor process consistency and part quality in AM. One of the main reasons for poor part quality in metal AM processes is ascribed to the heat flux in the part. For instance, constrained heat flux because of ill-considered part design leads to defects, such as warping and thermal stress-induced cracking. Existing non-proprietary approaches to predict the heat flux in AM at the part-level predominantly use mesh-based finite element analyses that are computationally tortuous — the simulation of a few layers typically requires several hours, if not days. Hence, to alleviate these challenges in metal AM processes, there is a need for efficient computational thermal models to predict the heat flux, and thereby guide part design and selection of process parameters instead of expensive empirical testing. Compared to finite element analysis techniques, the proposed mesh-free graph theory-based approach facilitates layer-by-layer simulation of the heat flux within a few minutes on a desktop computer. To explore these assertions we conducted the following two studies: (1) comparing the heat diffusion trends predicted using the graph theory approach, with finite element analysis and analytical heat transfer calculations based on Green’s functions for an elementary cuboid geometry which is subjected to an impulse heat input in a certain part of its volume, and (2) simulating the layer-by-layer deposition of three part geometries in a laser powder bed fusion metal AM process with: (a) Goldak’s moving heat source finite element method, (b) the proposed graph theory approach, and (c) further comparing the heat flux predictions from the last two approaches with a commercial solution. From the first study we report that the heat flux trend approximated by the graph theory approach is found to be accurate within 5% of the Green’s functions-based analytical solution (in terms of the symmetric mean absolute percentage error). Results from the second study show that the heat flux trends predicted for the AM parts using graph theory approach agrees with finite element analysis with error less than 15%. More pertinently, the computational time for predicting the heat flux was significantly reduced with graph theory, for instance, in one of the AM case studies the time taken to predict the heat flux in a part was less than 3 minutes using the graph theory approach compared to over 3 hours with finite element analysis. While this paper is restricted to theoretical development and verification of the graph theory approach for heat flux prediction, our forthcoming research will focus on experimental validation through in-process sensor-based heat flux measurements.

    

   more » « less