Deeply embedded systems powered by microcontrollers are becoming popular with the emergence of Internet-of-Things (IoT) technology. However, these devices primarily run C/C\({+}{+}\)code and are susceptible to memory bugs, which can potentially lead to both control data attacks and non-control data attacks. Existing defense mechanisms (such as control-flow integrity (CFI), dataflow integrity (DFI) and write integrity testing (WIT), etc.) consume a massive amount of resources, making them less practical in real products. To make it lightweight, we design a bitmap-based allowlist mechanism to unify the storage of the runtime data for protecting both control data and non-control data. The memory requirements are constant and small, regardless of the number of deployed defense mechanisms. We store the allowlist in the TrustZone to ensure its integrity and confidentiality. Meanwhile, we perform an offline analysis to detect potential collisions and make corresponding adjustments when it happens. We have implemented our idea on an ARM Cortex-M-based development board. Our evaluation results show a substantial reduction in memory consumption when deploying the proposed CFI and DFI mechanisms, without compromising runtime performance. Specifically, our prototype enforces CFI and DFI at a cost of just 2.09% performance overhead and 32.56% memory overhead on average.
more »
« less
Survey of Control-flow Integrity Techniques for Real-time Embedded Systems
Computing systems, including real-time embedded systems, are becoming increasingly connected to allow for more advanced and safer operation. Such embedded systems are also often resource-constrained, for example, with lower processing capabilities compared to general-purpose computing systems like desktops or servers. With the advent of paradigms such as internet-of-things (IoT), embedded systems in both commercial and industrial contexts are being increasingly interconnected and exposed to the external networks to improve automation and efficiency of operation. However, allowing external interfaces to such embedded systems increases their exposure to attackers. With an increase in attacks against embedded systems ranging from home appliances to industrial control systems operating critical equipment that have real-time requirements, it is imperative that defense mechanisms be created that explicitly consider such resource and real-time constraints. Control-flow integrity (CFI) is a family of defense mechanisms that prevent attackers from modifying the flow of execution. We survey CFI techniques, ranging from the basic to state of the art, that are built for embedded systems and real-time embedded systems and find that there is a dearth, especially for real-time embedded systems, of CFI mechanisms. We then present open challenges to the community to help drive future research in this domain.
more »
« less
- Award ID(s):
- 2038726
- PAR ID:
- 10402444
- Date Published:
- Journal Name:
- ACM Transactions on Embedded Computing Systems
- Volume:
- 21
- Issue:
- 4
- ISSN:
- 1539-9087
- Page Range / eLocation ID:
- 1 to 32
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Modern embedded and cyber-physical systems are ubiquitous. Many critical cyber-physical systems have real-time requirements (e.g., avionics, automobiles, power grids, manufacturing systems, industrial control systems, etc.). Recent developments and new functionality require real-time embedded devices to be connected to the Internet. This gives rise to the real-time Internet-of-things (RT-IoT) that promises a better user experience through stronger connectivity and efficient use of next-generation embedded devices. However, RT-IoT are also increasingly becoming targets for cyber-attacks, which is exacerbated by this increased connectivity. This paper gives an introduction to RT-IoT systems, an outlook of current approaches and possible research challenges towards secure RT-IoT frameworks.more » « less
-
null (Ed.)Ensuring the integrity of embedded programmable logic controllers (PLCs) is critical for safe operation of industrial control systems. In particular, a cyber-attack could manipulate control logic running on the PLCs to bring the process of safety-critical application into unsafe states. Unfortunately, PLCs are typically not equipped with hardware support that allows the use of techniques such as remote attestation to verify the integrity of the logic code. In addition, so far remote attestation is not able to verify the integrity of the physical process controlled by the PLC. In this work, we present PAtt, a system that combines remote software attestation with control process validation. PAtt leverages operation permutations—subtle changes in the operation sequences based on integrity measurements—which do not affect the physical process but yield unique traces of sensor readings during execution. By encoding integrity measurements of the PLC’s memory state (software and data) into its control operation, our system allows to remotely verify the integrity of the control logic based on the resulting sensor traces. We implement the proposed system on a real PLC controlling a robot arm, and demonstrate its feasibility. Our implementation enables the detection of attackers that manipulate the PLC logic to change process state and/or report spoofed sensor readings (with an accuracy of 97% against tested attacks).more » « less
-
Cyber-Physical Systems (CPS) have been increasingly subject to cyber-attacks including code injection attacks. Zero day attacks further exasperate the threat landscape by requiring a shift to defense in depth approaches. With the tightly coupled nature of cyber components with the physical domain, these attacks have the potential to cause significant damage if safety-critical applications such as automobiles are compromised. Moving target defense techniques such as instruction set randomization (ISR) have been commonly proposed to address these types of attacks. However, under current implementations an attack can result in system crashing which is unacceptable in CPS. As such, CPS necessitate proper control reconfiguration mechanisms to prevent a loss of availability in system operation. This paper addresses the problem of maintaining system and security properties of a CPS under attack by integrating ISR, detection, and recovery capabilities that ensure safe, reliable, and predictable system operation. Specifically, we consider the problem of detecting code injection attacks and reconfiguring the controller in real-time. The developed framework is demonstrated with an autonomous vehicle case study.more » « less
-
Abstract Recent advances in AI culminate a shift in science and engineering away from strong reliance on algorithmic and symbolic knowledge towards new data-driven approaches. How does the emerging intelligent data-centric world impact research on real-time and embedded computing? We argue for two effects: (1) new challenges in embedded system contexts, and (2) new opportunities for community expansion beyond the embedded domain. First,on the embedded system side, the shifting nature of computing towardsdata-centricityaffects the types of bottlenecks that arise. At training time, the bottlenecks are generallydata-related. Embedded computing relies onscarcesensor data modalities, unlike those commonly addressed in mainstream AI, necessitating solutions forefficient learningfrom scarce sensor data. At inference time, the bottlenecks areresource-related, calling forimproved resource economyandnovel scheduling policies. Further ahead, the convergence of AI around large language models (LLMs) introduces additionalmodel-relatedchallenges in embedded contexts. Second,on the domain expansion side, we argue that community expertise in handling resource bottlenecks is becoming increasingly relevant to a new domain: thecloudenvironment, driven by AI needs. The paper discusses the novel research directions that arise in the data-centric world of AI, covering data-, resource-, and model-related challenges in embedded systems as well as new opportunities in the cloud domain.more » « less
An official website of the United States government

