The strategy of detecting physiological signals and body movements using fabric-based pressure sensors offers the opportunity to unobtrusively collect multimodal health metrics using loose-fitting, familiar garments in natural environments. (A. Kiaghadi, S. Z. Homayounfar, J. Gummeson, T. Andrew, and D. Ganesan,
Wearable electromechanical sensors are essential to improve health monitoring and off‐site point‐of‐care applications. However, their practicality is restricted by narrow ranges of detection, failure to simultaneously sense static and dynamic pressures, and low durability. Here, an all‐fabric pressure sensor with high sensitivity in a broad range of pressures, from subtle heart pulses to body posture, exceeding that of previously‐reported sensors is introduced. By taking advantage of chemical vapor deposition of p‐doped poly(3,4‐ethylenedioxythiophene) chloride (PEDOT‐Cl) on two natural textiles (cotton gauze and cotton balls), multiscale tunable pressure sensitivity with low power demand for data read‐out is obtained. To protect the sensor against humidity induced degradations, the sensor is encapsulated with a hydrophobic coating that leads to ultrastability of the sensor performance even after 1 week of exposure to 100% relative humidity and 20 laundry cycles. The sensor reveals excellent performance retention of >99% over 70 000 bending cycles under ambient conditions. The varied utility of this sensor for health monitoring is demonstrated by recording heartbeats, respiration, and joint movements. Furthermore, using this sensor, grip strength is successfully detected by 93.6% accuracy as compared to commercial dynamometer, speaking of its potential as the first fabric‐based sensor allowing for personalized real‐time grip strength analysis.
more » « less- Award ID(s):
- 1763524
- NSF-PAR ID:
- 10403057
- Publisher / Repository:
- Wiley Blackwell (John Wiley & Sons)
- Date Published:
- Journal Name:
- Advanced Materials Technologies
- Volume:
- 8
- Issue:
- 6
- ISSN:
- 2365-709X
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
more » « less
Proc. ACM Interact. Mob. Wearable Ubiquitous Technol .,3 , 1–29 (2019)). However, many sensing scenarios, such as sleep and posture monitoring, involve an added static pressure from exerted body weight, which overpowers weaker pressure signals originating from heartbeats, respiration and pulse and phonation. Here, we introduce an all-fabric piezoionic pressure sensor (PressION) that, on account of its ionic conductivity, functions over a wide range of static and dynamic applied pressures (from subtle ballistic heartbeats and pulse waveforms, to larger-scale body movements). This piezoionic sensor also maintains its pressure responsivity in the presence of an added background pressure and upon integration into loose-fitting garments. The broad ability of PressION to record a wide variety of physiological signals in realistic environments was confirmed by acquiring heartbeat, pulse, joint motion, phonation and step data from different body locations. PressION’s sensitivity, along with its low-cost fabrication process, qualifies it as a uniquely useful sensing element in wearable health monitoring systems. -
more » « less
Abstract Flexible pressure sensors with high sensitivity, broad working range, and good scalability are highly desired for the next generation of wearable electronic devices. However, manufacturing of such pressure sensors still remains challenging. A large‐area compliant and cost‐effective process to fabricate high‐performance pressure sensors via a combination of mesh‐molded periodic microstructures and printed side‐by‐side electrodes is presented. The sensors exhibit low operating voltage (1 V), high sensitivity (20.9 kPa−1), low detection limit (7.4 Pa), fast response/recovery time (23/18 ms), and excellent reliability (over 10 000 cycles). More importantly, they exhibit ultra‐broad working range (7.4–1 000 000 Pa), high tunability, large‐scale production feasibility, and significant advantage in format miniaturization and creating sensor arrays with self‐defined patterns. The versatility of these devices is demonstrated in various human activity monitoring and spatial pressure mapping as electronic skins. Furthermore, utilizing printing methods, a flexible smart insole with a high level of integration for both foot pressure and temperature mapping is demonstrated. The scalable and cost‐effective manufacturing along with the good comprehensive performance of the pressure sensors makes them very attractive for future development of wearable smart devices and human–machine interfaces.
-
The measurement of vital signs (such as respiration rate, body temperature, pulse, and blood pressure), especially during strenuous activities, is essential for physical performance and health monitoring. A variety of wearable chest band sensors have been developed, commercialized, and widely used in consumer and healthcare settings. The plethora of technology choices also means that each unique chest band sensor may require different data acquisition hardware and software systems, and data may not be transferable between platforms. Therefore, the objective of this work was to develop a low-cost, disposable, respiration sensor that could be attached onto any elastic chest band. The approach was to spray-coat graphene nanosheet (GNS)-based thin films onto unidirectionally stretchable elastic fabric to form a piezoresistive material. Snap buttons were incorporated at the ends of the fabric so that they could be attached onto any chest band, removed at any time, and replaced for a new data collection event. The resistive nature of the nanocomposite sensor means that they can be easily interfaced (e.g., using a voltage divider) with any existing data acquisition (DAQ) module while adding respiration monitoring capabilities. To facilitate testing of these nanocomposite respiration sensors, a miniature DAQ module with four sensing channels was also prototyped. Then, tests were performed with human subjects wearing a nanocomposite chest band and a reference commercial respiration monitoring chest band. Simultaneous measurements of subject respiration verified the respiration monitoring performance of these low-cost, disposable, nanocomposite fabric sensors.more » « less
-
null (Ed.)Perspiration level monitoring enables numerous applications such as physical condition estimation, personal comfort monitoring, health/exercise monitoring, and inference of environmental conditions of the user. Prior works on perspiration (sweat) sensing require users to manually hold a device or attach adhesive sensors directly onto their skin, limiting user mobility and comfort. In this paper, we present a low-cost and novel wearable sensor system that is able to accurately estimate an individual's sweat level based on measuring moisture. The sensor is designed in a threadlike form factor, allowing it to be sewn into the seams of clothing, rather than having to act as a standalone sensor that the user must attach to their body. The system is comprised of multiple cotton-covered conductive threads that are braided into one sensor. When a person sweats, the resistance between the braided conductive threads changes as moisture becomes trapped in the cotton covering of the threads. The braided three-dimensional structure allows for robust estimation of perspiration level in the presence of external forces that may cause sensor distortion, such as motion. We characterize the relationship between the volume of sweat and measured resistance between the braided threads. Finally, we weave our sensors into the fabric of a shirt and conduct on-body experiments to study users' sweating level through various activities.more » « less
-
more » « less
Abstract Wearable strain sensors for movement tracking are a promising paradigm to improve clinical care for patients with neurological or musculoskeletal conditions, with further applicability to athletic wear, virtual reality, and next‐generation game controllers. Clothing‐like wearable strain sensors can support these use cases, as the fabrics used for clothing are generally lightweight and breathable, and interface with the skin in a manner that is mechanically and thermally familiar. Herein, a fabric capacitive strain sensor is presented and integrated into everyday clothing to measure human motions. The sensor is made of thin layers of breathable fabrics and exhibits high strains (>90%), excellent cyclic stability (>5000 cycles), and high water vapor transmission rates (≈50 g/h m2), the latter of which allows for sweat evaporation, an essential parameter of comfort. The sensor's functionality is verified under conditions similar to those experienced on the surface of the human body (35°C and % relative humidity) and after washing with fabric detergent. In addition, the fabric sensor shows stable capacitance at excitation frequencies up to 1 MHz, facilitating its low‐cost implementation in the Arduino environment. Finally, as a proof of concept, multiple fabric sensors are seamlessly integrated with commercial activewear to collect movement data. With the prioritization of breathability (air permeability and water vapor transmission), the fabric sensor design presented herein paves the way for future comfortable, unobtrusive, and discrete sensory clothing.
