Wearable electromechanical sensors are essential to improve health monitoring and off‐site point‐of‐care applications. However, their practicality is restricted by narrow ranges of detection, failure to simultaneously sense static and dynamic pressures, and low durability. Here, an all‐fabric pressure sensor with high sensitivity in a broad range of pressures, from subtle heart pulses to body posture, exceeding that of previously‐reported sensors is introduced. By taking advantage of chemical vapor deposition of p‐doped poly(3,4‐ethylenedioxythiophene) chloride (PEDOT‐Cl) on two natural textiles (cotton gauze and cotton balls), multiscale tunable pressure sensitivity with low power demand for data read‐out is obtained. To protect the sensor against humidity induced degradations, the sensor is encapsulated with a hydrophobic coating that leads to ultrastability of the sensor performance even after 1 week of exposure to 100% relative humidity and 20 laundry cycles. The sensor reveals excellent performance retention of >99% over 70 000 bending cycles under ambient conditions. The varied utility of this sensor for health monitoring is demonstrated by recording heartbeats, respiration, and joint movements. Furthermore, using this sensor, grip strength is successfully detected by 93.6% accuracy as compared to commercial dynamometer, speaking of its potential as the first fabric‐based sensor allowing for personalized real‐time grip strength analysis.
The strategy of detecting physiological signals and body movements using fabric-based pressure sensors offers the opportunity to unobtrusively collect multimodal health metrics using loose-fitting, familiar garments in natural environments. (A. Kiaghadi, S. Z. Homayounfar, J. Gummeson, T. Andrew, and D. Ganesan,
- Award ID(s):
- 1763524
- NSF-PAR ID:
- 10362618
- Publisher / Repository:
- The Electrochemical Society
- Date Published:
- Journal Name:
- Journal of The Electrochemical Society
- Volume:
- 168
- Issue:
- 1
- ISSN:
- 0013-4651
- Page Range / eLocation ID:
- Article No. 017515
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
more » « less
Abstract -
The measurement of vital signs (such as respiration rate, body temperature, pulse, and blood pressure), especially during strenuous activities, is essential for physical performance and health monitoring. A variety of wearable chest band sensors have been developed, commercialized, and widely used in consumer and healthcare settings. The plethora of technology choices also means that each unique chest band sensor may require different data acquisition hardware and software systems, and data may not be transferable between platforms. Therefore, the objective of this work was to develop a low-cost, disposable, respiration sensor that could be attached onto any elastic chest band. The approach was to spray-coat graphene nanosheet (GNS)-based thin films onto unidirectionally stretchable elastic fabric to form a piezoresistive material. Snap buttons were incorporated at the ends of the fabric so that they could be attached onto any chest band, removed at any time, and replaced for a new data collection event. The resistive nature of the nanocomposite sensor means that they can be easily interfaced (e.g., using a voltage divider) with any existing data acquisition (DAQ) module while adding respiration monitoring capabilities. To facilitate testing of these nanocomposite respiration sensors, a miniature DAQ module with four sensing channels was also prototyped. Then, tests were performed with human subjects wearing a nanocomposite chest band and a reference commercial respiration monitoring chest band. Simultaneous measurements of subject respiration verified the respiration monitoring performance of these low-cost, disposable, nanocomposite fabric sensors.more » « less
-
more » « less
Abstract Wearable wireless passive sensors are powerful potential building blocks of modern body area networks. However, these sensors are often hampered by numerous issues including restrictive read‐out distances due to near‐field coupling, fundamental tradeoffs in size/spectral performance, and unreliable sensor tracking during activity. Here, to overcome such issues implementing wearable sensing systems exhibiting coupled magnetic resonances are demonstrated. This approach is utilized to augment wireless telemetry from fully wearable, passive (zero electronics) resonator chains. Secondary receiver coils are integrated into fabric or skin to facilitate augmented read‐out from epidermal sweat, moisture, or pressure sensors—herein exhibiting enhanced read‐out range, relaxed constraints in sensor size (sensor spectral response becomes untethered from size) and reader‐sensor orientation. Unlike existing schemes, this readout method enables decoupled co‐readout of the sensor's distance and status, employed here for co‐measurement with human respiration. This type of decoupled readout can help compensate for movements that are so common in wearable monitoring. Simple to implement and requiring no microelectronics, this scheme streamlines into existing, body‐worn passive wireless telemetric systems with minimal modification.
-
null (Ed.)Studies with e-textile sensors embedded in garments are typically performed on static and controlled phantom models that do not reflect the dynamic nature of wearables. Instead, our objective was to understand the noise e-textile sensors would experience during real-world scenarios. Three types of sleeves, made of loose, tight, and stretchy fabrics, were applied to a phantom arm, and the corresponding fabric movement was measured in three dimensions using physical markers and image-processing software. Our results showed that the stretchy fabrics allowed for the most consistent and predictable clothing-movement (average displacement of up to −2.3 ± 0.1 cm), followed by tight fabrics (up to −4.7 ± 0.2 cm), and loose fabrics (up to −3.6 ± 1.0 cm). In addition, the results demonstrated better performance of higher elasticity (average displacement of up to −2.3 ± 0.1 cm) over lower elasticity (average displacement of up to −3.8 ± 0.3 cm) stretchy fabrics. For a case study with an e-textile sensor that relies on wearable loops to monitor joint flexion, our modeling indicated errors as high as 65.7° for stretchy fabric with higher elasticity. The results from this study can (a) help quantify errors of e-textile sensors operating “in-the-wild,” (b) inform decisions regarding the optimal type of clothing-material used, and (c) ultimately empower studies on noise calibration for diverse e-textile sensing applications.more » « less
-
more » « less
Abstract Wearable electroenzymatic sensors enable monitoring of clinically informative biomolecules in epidermally retrievable biofluids. Conventional wearable enzymatic sensors utilize Prussian Blue (a redox mediator) to achieve selectivity against electroactive interferents. However, the use of Prussian Blue presents fundamental challenges including: 1) the susceptibility of the sensor response to dynamic concentration variation of ionic species and 2) the poor operational stability due to the degradation of its framework. As an alternative wearable electroenzymatic sensor development methodology to bypass the aforementioned limitations, a mediator‐free sensing interface is devised, comprising of a coupled platinum nanoparticle/multiwall carbon nanotube layer and a permselective membrane. The interface is adapted to develop sensors targeting glucose, lactate, and choline (as examples of informative metabolites and nutrients), showing high degrees of sensitivity, selectivity (against a wide panel of naturally present and diverse interfering species), stability (<6.5% signal drift over 20 h operation), and reliability of sensing operation in sweat samples. By integration within a readout board, a wireless sample‐to‐answer system is realized for on‐body sweat biomarker analysis. This methodology can be adapted to target a wide panel of biomarkers in various biofluids, introducing a new sensor development direction for personal health monitoring.
