More Like this

1. Optical second harmonic generation in anisotropic multilayers with complete multireflection of linear and nonlinear waves using ♯SHAARP.ml package

   https://doi.org/10.1038/s41524-024-01229-2  

   Zu, Rui ; Wang, Bo ; He, Jingyang ; Weber, Lincoln ; Saha, Akash ; Chen, Long-Qing ; Gopalan, Venkatraman ( March 2024 , npj Computational Materials)

   Optical second harmonic generation (SHG) is a nonlinear optical effect widely used for nonlinear optical microscopy and laser frequency conversion. Closed-form analytical solution of the nonlinear optical responses is essential for evaluating materials whose optical properties are unknown a priori. A recent open-source code, ♯SHAARP.si, can provide such closed form solutions for crystals with arbitrary symmetries, orientations, and anisotropic properties at asingleinterface. However, optical components are often in the form of slabs, thin films on substrates, and multilayer heterostructures with multiple reflections of both the fundamental and up to ten different SHG waves at each interface, adding significant complexity. Many approximations have therefore been employed in the existing analytical approaches, such as slowly varying approximation, weak reflection of the nonlinear polarization, transparent medium, high crystallographic symmetry, Kleinman symmetry, easy crystal orientation along a high-symmetry direction, phase matching conditions and negligible interference among nonlinear waves, which may lead to large errors in the reported material properties. To avoid these approximations, we have developed an open-source package named Second Harmonic Analysis of Anisotropic Rotational Polarimetry in Multilayers (♯SHAARP.ml). The reliability and accuracy are established by experimentally benchmarking with both the SHG polarimetry and Maker fringes using standard and commonly used nonlinear optical materials as well as twisted 2-dimensional heterostructures.

    

   more » « less
2. Large Enhancements in Optical and Piezoelectric Properties in Ferroelectric Zn 1‐ x Mg x O Thin Films through Engineering Electronic and Ionic Anharmonicities

   https://doi.org/10.1002/apxr.202300003  

   Zu, Rui ; Ryu, Gyunghyun ; Kelley, Kyle P. ; Baksa, Steven M. ; Jacques, Leonard C. ; Wang, Bo ; Ferri, Kevin ; He, Jingyang ; Chen, Long‐Qing ; Dabo, Ismaila ; et al ( May 2023 , Advanced Physics Research)

   Multifunctionality as a paradigm requires materials exhibiting multiple superior properties. Integrating second‐order optical nonlinearity and large bandgap with piezoelectricity can, for example, enable broadband, strain‐tunable photonics. Though very different phenomena at distinct frequencies, both second‐order optical nonlinearity and piezoelectricity are third‐rank polar tensors present only in acentric crystal structures. However, simultaneously enhancing both phenomena is highly challenging since it involves competing effects with tradeoffs. Recently, a large switchable ferroelectric polarization of ≈80 μC cm⁻²was reported in Zn_1‐xMg_xO films. Here, ferroelectric Zn_1‐xMg_xO is demonstrated to be a platform that hosts simultaneously a 30% increase in the electronic bandgap, a 50% enhancement in the second harmonic generation (SHG) coefficients, and a near 200% improvement in the piezoelectric coefficients over pure ZnO. These enhancements are shown to be due to a 400% increase in the electronic anharmonicity and a ≈200% decrease in the ionic anharmonicity with Mg substitution. Precisely controllable periodic ferroelectric domain gratings are demonstrated down to 800 nm domain width, enabling ultraviolet quasi‐phase‐matched optical harmonic generation as well as domain‐engineered piezoelectric devices.

    

   more » « less
3. Enhanced Piezoelectric, Ferroelectric, and Electrostrictive Properties of Lead‐Free (1‐ x )BCZT‐( x )BCST Electroceramics with Energy Harvesting Capability

   https://doi.org/10.1002/smll.202300549  

   Baraskar, Bharat G. ; Kolekar, Yesappa D. ; Thombare, Balu. R. ; James, Ajit. R. ; Kambale, Rahul C. ; Ramana, C. V. ( May 2023 , Small)

   Next‐generation electronics and energy technologies can now be developed as a result of the design, discovery, and development of novel, environmental friendly lead (Pb)‐free ferroelectric materials with improved characteristics and performance. However, there have only been a few reports of such complex materials’ design with multi‐phase interfacial chemistry, which can facilitate enhanced properties and performance. In this context, herein, novel lead‐free piezoelectric materials (1‐x)Ba_0.95Ca_0.05Ti_0.95Zr_0.05O₃‐(x)Ba_0.95Ca_0.05Ti_0.95Sn_0.05O₃, are reported, which are represented as (1‐x)BCZT‐(x)BCST, with demonstrated excellent properties and energy harvesting performance. The (1‐x)BCZT‐(x)BCST materials are synthesized by high‐temperature solid‐state ceramic reaction method by varyingxin the full range (x= 0.00–1.00). In‐depth exploration research is performed on the structural, dielectric, ferroelectric, and electro‐mechanical properties of (1‐x)BCZT‐(x)BCST ceramics. The formation of perovskite structure for all ceramics without the presence of any impurity phases is confirmed by X‐ray diffraction (XRD) analyses, which also reveals that the Ca²⁺, Zr⁴⁺, and Sn⁴⁺are well dispersed within the BaTiO₃lattice. For all (1‐x)BCZT‐(x)BCST ceramics, thorough investigation of phase formation and phase‐stability using XRD, Rietveld refinement, Raman spectroscopy, high‐resolution transmission electron microscopy (HRTEM), and temperature‐dependent dielectric measurements provide conclusive evidence for the coexistence of orthorhombic + tetragonal (Amm2+P4mm) phases at room temperature. The steady transition ofAmm2crystal symmetry toP4mmcrystal symmetry with increasingxcontent is also demonstrated by Rietveld refinement data and related analyses. The phase transition temperatures, rhombohedral‐orthorhombic (T_R‐O), orthorhombic‐ tetragonal (T_O‐T), and tetragonal‐cubic (T_C), gradually shift toward lower temperature with increasingxcontent. For (1‐x)BCZT‐(x)BCST ceramics, significantly improved dielectric and ferroelectric properties are observed, including relatively high dielectric constantε_r≈ 1900–3300 (near room temperature),ε_r≈ 8800–12 900 (near Curie temperature), dielectric loss, tanδ≈ 0.01–0.02, remanent polarizationP_r≈ 9.4–14 µC cm⁻², coercive electric fieldE_c≈ 2.5–3.6 kV cm⁻¹. Further, high electric field‐induced strainS≈ 0.12–0.175%, piezoelectric charge coefficientd₃₃≈ 296–360 pC N⁻¹, converse piezoelectric coefficient ≈ 240–340 pm V⁻¹, planar electromechanical coupling coefficientk_p≈ 0.34–0.45, and electrostrictive coefficient (Q₃₃)_avg≈ 0.026–0.038 m⁴C⁻²are attained. Output performance with respect to mechanical energy demonstrates that the (0.6)BCZT‐(0.4)BCST composition (x= 0.4) displays better efficiency for generating electrical energy and, thus, the synthesized lead‐free piezoelectric (1‐x)BCZT‐(x)BCST samples are suitable for energy harvesting applications. The results and analyses point to the outcome that the (1‐x)BCZT‐(x)BCST ceramics as a potentially strong contender within the family of Pb‐free piezoelectric materials for future electronics and energy harvesting device technologies.

    

   more » « less
4. Local ordering in Ge/Ge–Sn semiconductor alloy core/shell nanowires revealed by extended x-ray absorption fine structure (EXAFS)

   https://doi.org/10.1063/5.0136746  

   Lentz, J. Zach ; Woicik, J. C. ; Bergschneider, Matthew ; Davis, Ryan ; Mehta, Apurva ; Cho, Kyeongjae ; McIntyre, Paul C. ( February 2023 , Applied Physics Letters)

   Short-range atomic order in semiconductor alloys is a relatively unexplored topic that may promote design of new materials with unexpected properties. Here, local atomic ordering is investigated in Ge–Sn alloys, a group-IV system that is attractive for its enhanced optoelectronic properties achievable via a direct gap for Sn concentrations exceeding ≈10 at. %. The substantial misfit strain imposed on Ge–Sn thin films during growth on bulk Si or Ge substrates can induce defect formation; however, misfit strain can be accommodated by growing Ge–Sn alloy films on Ge nanowires, which effectively act as elastically compliant substrates. In this work, Ge core/Ge 1−x Sn x ( x ≈  0.1) shell nanowires were characterized with extended x-ray absorption fine structure (EXAFS) to elucidate their local atomic environment. Simultaneous fitting of high-quality EXAFS data collected at both the Ge K-edge and the Sn K-edge reveals a large (≈ 40%) deficiency of Sn in the first coordination shell around a Sn atom relative to a random alloy, thereby providing the first direct experimental evidence of significant short-range order in this semiconductor alloy system. Comparison of path length data from the EXAFS measurements with density functional theory simulations provides alloy atomic structures consistent with this conclusion. 

   more » « less
5. Jahn–Teller-driven phase segregation in MnxCo3−xO4 spinel thin films

   https://doi.org/10.1116/6.0002329  

   Blanchet, Miles D. ; Matthews, Bethany E. ; Spurgeon, Steven R. ; Heald, Steve M. ; Isaacs-Smith, Tamara ; Comes, Ryan B. ( September 2023 , Journal of Vacuum Science & Technology A)

   Transition metal spinel oxides comprised of earth-abundant Mn and Co have long been explored for their use in catalytic reactions and energy storage. However, understanding functional properties can be challenging due to differences in sample preparation and the ultimate structural properties of the materials. Epitaxial thin film synthesis provides a novel means of producing precisely controlled materials to explore the variations reported in the literature. In this work, MnxCo3−xO4 samples from x = 0 to x = 1.28 were synthesized through molecular beam epitaxy and characterized to develop a material properties map as a function of stoichiometry. Films were characterized via in situ x-ray photoelectron spectroscopy, x-ray diffraction, scanning transmission electron microscopy, and polarized K-edge x-ray absorption spectroscopy. Mn cations within this range were found to be octahedrally coordinated, in line with an inverse spinel structure. Samples largely show mixed Mn3+ and Mn4+ character with evidence of phase segregation tendencies with the increasing Mn content and increasing Mn3+ formal charge. Phase segregation may occur due to structural incompatibility between cubic and tetragonal crystal structures associated with Mn4+ and Jahn–Teller active Mn3+ octahedra, respectively. Our results help in explaining the reported differences across samples in these promising materials for renewable energy technologies. 

   more » « less