skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Study on the Sensitivity of the Streamwise Location of MVG on SWBLI in MVG-Based Supersonic Flow Control
Micro vortex generator (MVG) is a currently facile, robust, and feasible device for supersonic and hypersonic flow control. The purpose of this study is to investigate the impact on SWBLI from the streamwise location of MVG. Large eddy simulation (LES) was conducted on MVG controlled supersonic ramp flow to reveal the sensitivity of MVG streamwise position on shock-wave boundary-layer interaction (SWBLI) control. Numerical cases with minor different distances between MVG and ramp corner are carried out. The results are analyzed in time-averaged and instantaneous view, respectively. The results show that streamwise position has a significant effect on SWBLI in some aspects. With minor changes on the streamwise position, the ring-like vortices generated by MVG were very similar, with only small changes in height and intensity. However, the small changes made on the ring-like vortices produced relatively significant changes to the separation region in front of the ramp. In terms of the time-averaged solution, the farther the MVG is from the ramp, the higher the ring-like vortices are lifted, and the shock wave is also disturbed/reduced more strongly. Further, the flow separation zone on the wall also appears smaller. The results of this study play a guiding role for further optimal configuration of MVG in flow control.  more » « less
Award ID(s):
1912191
PAR ID:
10412274
Author(s) / Creator(s):
; ; ; ;
Date Published:
Journal Name:
Fluids
Volume:
7
Issue:
9
ISSN:
2311-5521
Page Range / eLocation ID:
285
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; ; (, Processes)
    Modal analysis on micro-vortex generator (MVG)-controlled supersonic flow at different Mach numbers is performed in this paper. The purpose of this investigation is to clarify the different properties of streamwise and ring-like vortical modes, and the effects of different Mach numbers on these modes, to further understand the vortical structures as they travel from MVG down to the shock wave/boundary-layer interaction (SWBLI) region. To this end, a high order and high resolution large eddy simulation (LES) was carried out, which identified the vortical structures behind the MVG and in the shock wave/boundary-layer interaction (SWBLI) region in the supersonic ramp flow with flow speeds of three different Mach numbers 1.5, 2.0, and 2.5. The proper orthogonal decomposition (POD) then was adopted to investigate the modes of the fluctuation flow field. It emerged that the streamwise and ring-like vortical modes were disparate in energy distribution, structural order, frequency and amplitude. Furthermore, it showed that as the Mach number increased, the energy of the streamwise modes increased while the opposite was true for ring-like modes; and the streamwise modal structures were altered more significantly than the ring-like modes, and the frequency of each mode scarcely varied. It was also found that the streamwise vortices absorbed energy from the ring-like vortices while they traveled from the MVG down to the SWBLI region, but the dominant frequency of each mode rarely changed during this process. 
    more » « less
  2. (, AIAA Aviation Conference)
    null (Ed.)
    Flight vehicles that operate in the supersonic regime can be subject to adverse fluid-structure interactions due to their lightweight design. The presence of geometric obstructions such as control surfaces or fins can induce compression shocks that can interact with the boundary layer, leading to flow separation. The interaction of flow, compression shock and structural dynamics is very difficult to model and currently only poorly understood. This work investigates experimentally the interaction between a compliant panel in a Mach 2 flow under a ramp-induced shock-wave/boundary layer interaction (SWBLI). Brass panels of length 4.8" and width 2.5" and different thicknesses (h=0.020", 0.016", 0.012" and 0.010") are investigated. Tests are performed both with and without a compression ramp installed. This direct comparison allows characterization of the effect of the SWBLI on the system dynamics. High-speed stereoscopic digital image correlation (DIC) and fast-response pressure sensitive paint (PSP) are used to obtain simultaneous full field deformation and surface pressure of the panels. The results show that the shock induced by the 20compression ramp leads to separation of the turbulent boundary layer close to the ramp starting at about 80% of the panel length. This results in a region of large pressure fluctuations which primarily increase the vibration amplitude of the second panel mode. Analysis of the fundamental mode, which contains most of the vibration energy of the panel, shows that the SWBLI does not lead to changes of this mode, neither in frequency, amplitude or mode shape. On the other hand, analysis of the shock foot motion shows that the shock primarily oscillates at the fundamental frequency of the panel. This means that while the shock and panel oscillate at the same frequency, it is not two-way coupling. The panel vibration dictates the motion of the shock, but the shock (or rather the SWBLI) does not modify the fundamental panel vibration beyond the forcing provided by the turbulent boundary layer. Full field surface pressure predictions are made using linearized potential flow theory, which relates the local slope of the panel to the surface pressure. Results are found to be in good agreement in the region of attached flow. 
    more » « less
  3. ; ; ; ; (, Journal of Fluids and Structures)
    Flight vehicles that operate in the supersonic regime can be subject to adverse fluid–structure interactions due to their lightweight design. The presence of geometric obstructions such as control surfaces or fins can induce shocks that can interact with the boundary layer, leading to flow separation. This work investigates experimentally the interaction between a compliant panel in a Mach 2 flow under a compression ramp-induced shock-wave/boundary-layer interaction (SBLI). Thin brass panels of different thickness are investigated in a wind tunnel. Tests are performed both with and without a 20◦ compression ramp installed. This direct comparison allows characterization of the effect of the SBLI on the system dynamics. High-speed stereoscopic digital image correlation (DIC) and fast-response pressure sensitive paint (PSP) are used to obtain simultaneous measurements of full field deformation and surface pressure of the panels. The panel vibration is dominated by the first bending mode. Despite the forcing of the separation shock foot, the presence of the SBLI does not significantly modify the operational deflection shape, frequency, and amplitude of the dominant vibration mode, beyond what is observed for the no-SBLI case. On the other hand, analysis of the shock foot motion shows that the shock primarily oscillates at the first natural frequency of the panel. This leads to the conclusion that the shock foot oscillation is driven by the panel vibration in a one-way coupling mechanism. The SBLI does modify the higher modes, which is likely due to localized forcing by the separation shock foot. Full-field surface pressure predictions are made using first order piston theory. Results show that the fluid–structure interaction is dominated by the large region of attached flow upstream of the shock foot. 
    more » « less
  4. ; ; ; ; ; (, 20th International Symposium on Application of Laser and Imaging Techniques to Fluid Mechanics)
    The fluid-structure interaction (FSI) of a compliant panel under a compression-ramp-induced shock/boundary-layer interaction (SBLI) has been studied in Mach 2 flow. Simultaneous high-speed measurements of the velocity field and the panel displacement were conducted using 50 kHz particle image velocimetry (PIV) and 5 kHz stereoscopic digital image correlation (DIC). The mean effect of the panel displacement has been evaluated by monitoring the change in velocity profiles along the streamwise direction (x), upstream of the separated flow region. Streamwise (u) velocity near the panel surface has been shown to change its magnitude in response to the wall shape. Furthermore, the strong cross-correlation between fluctuations of the wall-normal panel displacement and the transverse (v) velocity can be explained by the flow remaining tangent to the wall surface as the panel deforms. This latter result is consistent with the panel motion being sufficiently low frequency compared to flow convective time scales that the flow is quasi-steady In addition, assessment of the correlation between the separation shock position and panel displacement seems to suggest that when the panel is bulged down (concave up) at the downstream end of the panel, a larger separated flow is generated and the shock moves upstream. This observation remains speculative, but is consistent with the flow undergoing greater compression for the bulged down case. 
    more » « less
  5. ; ; ; ; (, AIAA Scitech Meeting)
    The vibration of a compliant panel under a shock / boundary layer interaction (SBLI) induced by a compression ramp in a Mach 2 flow, is investigated experimentally. The panel is made from brass shim stock of length (streamwise), width (spanwise) and thickness of 122 mm by 63.5 mm by 0.25 mm, respectively. The 20° compression ramp is placed near the downstream edge of the compliant panel, and it creates a shock-induced turbulent separated flow that extends over the downstream 20% of the panel. Large pressure fluctuations occur in the region of the separation shock foot unsteadiness. The pressure fluctuations increase vibration amplitudes of the higher panel modes, especially the second mode, which has an antinode near the shock foot region. In this work, the authors use structural modifications of the baseline compliant panel to mitigate vibrations induced by the large pressure fluctuations of the shock foot unsteadiness. A thin rib is attached in the spanwise direction to the lee side of the panel at the location of SBLI. In one configuration, the rib is attached to the panel using epoxy adhesive, which creates a stiff connection. In another configuration, the rib is attached to the panel via double-sided viscoelastic tape, which adds significant damping to the system. The panel vibration and surface pressure field are measured using stereoscopic digital image correlation and pressure sensitive paint. Results show that especially the second vibration mode of the panel is reduced through the addition of the rib. This effect is more pronounced in the case where the viscoelastic tape was used, where a 72% reduction in vibration is observed. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email