Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Oil-paper-umbrella-inspired passive radiative cooling using recycled packaging foam
Passive daytime radiative cooling (PDRC) is a promising energy-saving cooling method to cool objects without energy consumption. Although numerous PDRC materials and structures have been proposed to achieve sub-ambient temperatures, the technique faces unprecedented challenges brought on by complicated and expensive fabrication. Herein, inspired by traditional Chinese oil-paper umbrellas, we develop a self-cleaning and self-cooling oil-foam composite (OFC) made of recycled polystyrene foam and tung oil to simultaneously achieve efficient passive radiative cooling and enhanced thermal dissipation of objects. The OFCs show high solar reflectance (0.90) and high mid-infrared thermal emittance (0.89) during the atmospheric transparent window, contributing to a sub-ambient temperature drop of ∼5.4 °C and cooling power of 86 W m −2 under direct solar irradiance. Additionally, the worldwide market of recycled packaging plastics can provide low-cost raw materials, further eliminating the release of plastics into the environment. The OFC offers an energy-efficient, cost-effective and environmentally friendly candidate for building cooling applications and provides a value-added path for plastic recycling.  more » « less
Award ID(s):
1941743
PAR ID:
10412699
Author(s) / Creator(s):
; ; ; ; ;
Date Published:
Journal Name:
Journal of Materials Chemistry A
Volume:
11
Issue:
16
ISSN:
2050-7488
Page Range / eLocation ID:
9152 to 9159
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; (, Nanophotonics)
    Abstract Switchable radiative cooling based on the phase-change material vanadium dioxide (VO2) automatically modulates thermal emission in response to varying ambient temperature. However, it is still challenging to achieve constant indoor temperature control solely using a VO2-based radiative cooling system, especially at low ambient temperatures. Here, we propose a reverse-switching VO2-based radiative cooling system, assisting indoor air conditioning to obtain precise indoor temperature control. Unlike previous VO2-based radiative cooling systems, the reverse VO2-based radiative cooler turns on radiative cooling at low ambient temperatures and turns off radiative cooling at high ambient temperatures, thereby synchronizing its cooling modes with the heating and cooling cycles of the indoor air conditioning during the actual process of precise temperature control. Calculations demonstrate that our proposed VO2-based radiative cooling system significantly reduces the energy consumption by nearly 30 % for heating and cooling by indoor air conditioning while maintaining a constant indoor temperature, even surpassing the performance of an ideal radiative cooler. This work advances the intelligent thermal regulation of radiative cooling in conjunction with the traditional air conditioning technology. 
    more » « less
  2. ; ; ; (, Energies)
    Passive radiative cooling materials are widely recognized as attractive innovations for reducing emissions and expanding life-saving cooling access. Despite immense research attention, the adoption of such technologies is limited largely due to a lack of scalability and cost compatibility with market needs. While paint and coating-based approaches offer a more sensible solution, many demonstrations suffer from issues such as a low solar reflectance performance or a lack of material sustainability due to the use of harmful solvents. In this work, we demonstrate a passive radiative cooling paint which achieves an extremely high solar reflectance value of 98% using a completely water-based formulation. Material sustainability is promoted by incorporating size-dispersed calcium phosphate biomaterials, which offer broadband solar reflectance, as well as a self-crosslinking water-based binder, providing water resistance and durability without introducing harmful materials. Common industry pigments are integrated within the binder for comparison, illustrating the benefit of finely-tuned particle size distributions for broadband solar reflectance, even in low-refractive-index materials such as calcium phosphates. With scalability, outdoor durability, and eco-friendly materials, this demonstrated paint offers a practical passive radiative cooling approach without exacerbating other environmental issues. 
    more » « less
  3. ; ; ; ; (, Angewandte Chemie International Edition)
    Abstract Synthetic plastics sourced from petroleum have gained widespread use since the 1950s. Polystyrene (PS) is one of the most extensively used plastics, as it is colorless, has high mechanical strength, and exhibits excellent chemical and thermal stability; however, it is also one of the least recycled plastics because of the high cost and low profit in recycling. Herein, we demonstrate a mechanochemical recycling approach that allows PS to be efficiently degraded into benzene when it is ground in a ball mill with AlCl3. For example, when 165 kDa PS pellets are milled with AlCl3, the extent of degradation reaches 90% at 15 min. Isotope labeling experiments indicate that both ambient water and the polymer backbone can be proton sources for the formation of benzene. The benzene generated in the mechanochemical degradation can be used to synthesize styrene, which can be repolymerized to produce polystyrene, allowing for the closed‐loop recycling of PS. In addition, a mechanochemical Friedel–Crafts acylation between the generated benzene and the subsequently added benzoic anhydride produces benzophenone in 40%–50% yield. The mechanochemical degradation process demonstrated here is solvent‐free, cost‐effective, and energy‐efficient, providing a promising route for the chemical recycling and upcycling of PS. 
    more » « less
  4. ; ; ; (, Advanced Sustainable Systems)
    Abstract Concentrating photovoltaic (CPV) offers a promising solution to address the global energy crisis. However, excessive heating remains a major issue for photovoltaic, resulting in a reduced solar‐to‐electricity conversion efficiency and waste heat discharge. Here, an energy‐efficient and self‐sustained concentrating photovoltaic thermal (CPVT) system is presented by utilizing a superwicking metal (SWIM) heat‐mass exchanger that simultaneously converts solar energy for electricity, steam generation, and heat storage. The system achieves high integration by directly attaching the SWIM plate to the backside of a CPV cell. The SWIM surface pulls a thin film of water uphill across its surface, effectively extracting waste heat from the CPV panel through interfacial evaporative heat transfer and repurposing it for steam generation and thermal storage. SWIM shows a large cooling capacity through a combined radiative, conductive, and evaporative cooling processes. Under 100x solar concentration, SWIM reduces the CPV temperature from 98.12 to 69.73 °C, boosting the electricity generation by 19.76%. Additionally, the developed SWIM‐CPV system can track the sun throughout the day to maximize solar radiance and energy harvesting performance. An average solar energy harvesting efficiency over 80% is demonstrated for concentration ratios from 10x to 100x, surpassing most comparable technologies. 
    more » « less
  5. ; ; ; ; ; ; ; ; ; ; et al (, Advanced Functional Materials)
    Abstract Foam materials are widely used in packaging and buildings for thermal insulation, sound absorption, shock absorption, and other functions. They are dominated by petroleum‐based plastics, most of which, however, are not biodegradable nor fire‐proofing, leading to severe plastic pollution and safety concerns. Here, a fire‐proofing, thermally insulating, recyclable 3D graphite‐cellulose nanofiber (G‐CNF) foam fabricated from resource‐abundant graphite and cellulose is reported. A freeze‐drying‐free and scalable ionic crosslinking method is developed to fabricate Cu 2+ ionic crosslinked G‐CNF (Cu‐G‐CNF) foam with a low energy consumption and cost. Moreover, the direct foam formation strategy enables local foam manufacturing to fulfil the local demand. The ionic crosslinked G‐CNF foam demonstrates excellent water stability (the foam can maintain mechanical robustness even in wet state and recover after being dried in air without deformation), fire resistance (41.7 kW m −2 vs 214.3 kW m −2 in the peak value of heat release rate) and a low thermal conductivity (0.05 W/(mK)), without compromising the recyclability, degradability, and mechanical performance of the composite foam. The demonstrated 3D G‐CNF foam can potentially replace the commercial plastic‐based foam materials, representing a sustainable solution against the “white pollution”. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Text Encoded Conversion
  • XML
  • Save / Share this Record
  • Send to Email