skip to main content


Title: Piezo-Pyro-Photo-electric Energy Harvesting with Smart Materials based Flag
Abstract: This paper aims to develop a novel concept for energy harvesting via flexible inverted flags combining photovoltaic cells with piezoelectric flexible films. Using technology currently available, we have designed and fabricated piezo-pyro-photo-electric harvesters made of polyvinylidene fluoride (PVDF) piezoelectric elements combined with mini solar panels made of silicon. Experimental measurements of the motion dynamics and power generation were collected for the flags when subjected to wind, heat, and light sources simultaneously and individually. Results indicate a significant improvement in energy harvesting capability compared to isolated single piezoelectric devices. Thus, we anticipate a substantial impact of piezo- pyro-photo-electric energy harvesting device applications where remote power generation is needed. The Flag uses flexible piezoelectric and pyroelectric strips and flexible photovoltaic cells panel. The piezo-pyro- simultaneously generates power through movement and heat, respectively, while the photovoltaic cells harvest solar energy to produce electric power. The beauty of this Flag is to develop power day and night depending on the energy sources available. The basic concept is presented and validated by laboratory experiments with controlled airflow, light, and infrared heat. The maximum voltage generated was 60 mV when the Flag was simultaneously exposed to low-level wind, thermal and light energies.  more » « less
Award ID(s):
2106583
PAR ID:
10415780
Author(s) / Creator(s):
Date Published:
Journal Name:
Sensors transducers
Volume:
260
Issue:
1
ISSN:
2306-8515
Page Range / eLocation ID:
24-27
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. Photovoltaic solar cells have been extensively used for various applications and are considered one of the most efficient green energy sources. However, their 2D surface area solar harvesting has limitations, and there is an increasing need to explore the possibility of multiple layer solar harvest for enhanced energy density. To address this, we have developed spectral-selective transparent thin films based on porphyrin and iron oxide compounds that allow solar light to penetrate multiple layers, significantly increasing solar harvesting surface area and energy density. These thin films are designed as photovoltaic (PV) and photothermal (PT) panels that can convert photons into either electricity or thermal energy for various green energy applications, such as smart building skins and solar desalination. The advantages of this 3D solar harvesting system include enlarged solar light collecting surface area and increased energy density. The multilayer system transforms the current 2D to 3D solar harvesting, enabling efficient energy generation. This review discusses recent developments in the synthesis and characterization of PV and PT transparent thin films for solar harvesting and energy generation using multilayers. Major applications of the 3D solar harvesting system are reviewed, including thermal energy generation, multilayered DSSC PV system, and solar desalination. Some preliminary data on transparent multilayer DSSC PVs are presented. 
    more » « less
  2. Emerging flexible and stretchable devices open up novel and attractive applications beyond traditional rigid wearable devices. Since the small and flexible form-factor severely limits the battery capacity, energy harvesting (EH) stands out as a critical enabler of new devices. Despite increasing interest in recent years, the capacity of wearable energy harvesting remains unknown. Prior work analyzes the power generated by a single and typically rigid transducer. This choice limits the EH potential and undermines physical flexibility. Moreover, current results do not translate to total harvested energy over a given period, which is crucial from a developer perspective. In contrast, this paper explores the daily energy harvesting potential of combining flexible light and motion energy harvesters. It first presents a multi-modal energy harvesting system design whose inputs are flexible photo-voltaic cells and piezoelectric patches. We measure the generated power under various light intensity and gait speeds. Finally, we construct daily energy harvesting patterns of 9593 users by integrating our measurements with the activity data from the American Time Use Survey. Our results show that the proposed system can harvest on average 0. 6mAh @ 3. 6V per day. 
    more » « less
  3. The piezo-phototronic effect (a coupling effect of piezoelectric, photoexcitation and semiconducting properties, coined in 2010) has been demonstrated to be an ingenious and robust strategy to manipulate optoelectronic processes by tuning the energy band structure and photoinduced carrier behavior. The piezo-phototronic effect exhibits great potential in improving the quantum yield efficiencies of optoelectronic materials and devices and thus could help increase the energy conversion efficiency, thus alleviating the energy shortage crisis. In this review, the fundamental principles and challenges of representative optoelectronic materials and devices are presented, including photocatalysts (converting solar energy into chemical energy), solar cells (generating electricity directly under light illumination), photodetectors (converting light into electrical signals) and light-emitting diodes (LEDs, converting electric current into emitted light signals). Importantly, the mechanisms of how the piezo-phototronic effect controls the optoelectronic processes and the recent progress and applications in the above-mentioned materials and devices are highlighted and summarized. Only photocatalysts, solar cells, photodetectors, and LEDs that display piezo-phototronic behavior are reviewed. Material and structural design, property characterization, theoretical simulation calculations, and mechanism analysis are then examined as strategies to further enhance the quantum yield efficiency of optoelectronic devices via the piezo-phototronic effect. This comprehensive overview will guide future fundamental and applied studies that capitalize on the piezo-phototronic effect for energy conversion and storage. 
    more » « less
  4. Among major energy conversion methods, photovoltaic (PV) solar cells have been the most popular and widely employed for a variety of applications. Although a PV solar panel has been shown as one of the most efficient green energy sources, its 2D surface solar light harvesting has reached great limitations as it requires large surface areas. There is, therefore, an increasing need to seek solar harvest in a three-dimensional fashion for enhanced energy density. In addition to a conventional 2D solar panel in the x-y area, we extend another dimension of solar harvesting in the z-axis through multiple CdTe solar panels arranged in parallel. The high transparency allows sunlight to partially penetrate multiple solar panels, resulting in significantly increased solar harvesting surface area in a 3D fashion. The advantages of the 3D multi-panel solar harvesting system include: i) enlarged solar light collecting surface area, therefore increased energy density, ii) the total output power from multiple panels can exceed that of the single panel, and iii) significantly reduced surface area needed for densely populated cities. With five CdTe solar panels of different transparencies in parallel, the multilayer system can produce collective output power 233% higher than that of the single solar panel under the same surface area when arranged in descending (i.e., PV panel with the highest transparency on top and lowest at bottom). The PCE of the multi-panel system has also increased 233% in descending order indicating the viability of 3D solar harvesting. The multi-panel system will dimensionally transform solar harvesting from 2D to 3D for more efficient energy generation. 
    more » « less
  5. Abstract

    Piezo‐ and pyroelectric materials are of interest, for example, for energy harvesting applications, for the development of tactile sensors, as well as neuromorphic computing. This study reports the observation of pyro‐ and piezoelectricity in thin surface‐attached polymer brushes containing zwitterionic and electrolytic side groups that are prepared via surface‐initiated polymerization. The pyro‐ and piezoelectric properties of the surface‐grafted polyelectrolyte brushes are found to sensitively depend on and can be tuned by variation of the counterion. The observed piezo‐ and pyroelectric properties reflect the structural complexity of polymer brushes, and are attributed to a complex interplay of the non‐uniform segment density within these films, together with a non‐uniform distribution of counterions and specific ion effects. The fabrication of thin pyroelectric films by surface‐initiated polymerization is an important addition to the existing strategies toward such materials. Surface‐initiated polymerization, in particular, allows for facile grafting of polar thin polymer films from a wide range of substrates via a straightforward two‐step protocol that obviates the need for multistep laborious synthetic procedures or thin film deposition protocols. The ability to produce polymer brushes with piezo‐ and pyroelectric properties opens up new avenues of application of these materials, for example, in energy harvesting or biosensing.

     
    more » « less