More Like this

1. Amplification of near field radiation at surfaces of pure dielectric domain with anti-reflection films and photonic crystal structures

   https://doi.org/10.1088/1361-6463/acc8e2  

   Wen, Sy-Bor; Jakkinapalli, Aravind (April 2023, Journal of Physics D: Applied Physics)

   Abstract With chemical stability under high temperatures, dielectric materials can be idealized thermal emitters for different energy applications. However, dielectric materials do not support surface waves at near-infrared ranges for longer-distance thermal photon tunneling, which limits their applications in near-field thermal radiation. It is demonstrated in this study that thermal field amplification at near-infrared wavelengths at dielectric surfaces could be achieved through asymmetric Fabry–Perot resonance with anti-reflection coatings or 1D photonic crystal type structures. ⩾100 nm near-infrared thermal photon tunneling can be achieved when these thin film structures are added to the emitter and the collector surfaces. Among these two thin film structures, 1D photonic crystal type periodic structures constructed with the same high refractive index material as the emitter/collector material allow near-field thermal photon tunneling at large parallel wavenumbers. Moreover, the field amplification can be increased by adding more 1D photonic crystal layers to achieve even longer distances near field thermal photon tunneling. 

   more » « less
2. Digitally-embroidered liquid metal electronic textiles for wearable wireless systems

   https://doi.org/10.1038/s41467-022-29859-4  

   Lin, Rongzhou; Kim, Han-Joon; Achavananthadith, Sippanat; Xiong, Ze; Lee, Jason K.; Kong, Yong Lin; Ho, John S. (December 2022, Nature Communications)

   Abstract Electronic textiles capable of sensing, powering, and communication can be used to non-intrusively monitor human health during daily life. However, achieving these functionalities with clothing is challenging because of limitations in the electronic performance, flexibility and robustness of the underlying materials, which must endure repeated mechanical, thermal and chemical stresses during daily use. Here, we demonstrate electronic textile systems with functionalities in near-field powering and communication created by digital embroidery of liquid metal fibers. Owing to the unique electrical and mechanical properties of the liquid metal fibers, these electronic textiles can conform to body surfaces and establish robust wireless connectivity with nearby wearable or implantable devices, even during strenuous exercise. By transferring optimized electromagnetic patterns onto clothing in this way, we demonstrate a washable electronic shirt that can be wirelessly powered by a smartphone and continuously monitor axillary temperature without interfering with daily activities. 

   more » « less
3. Geometrically Tunable Beamed Light Emission from a Quantum‐Dot Ensemble Near a Gradient Metasurface

   https://doi.org/10.1002/adom.201901951  

   Wang, Xiaowei; Li, Yuyu; Toufanian, Reyhaneh; Kogos, Leonard_C; Dennis, Allison_M; Paiella, Roberto (February 2020, Advanced Optical Materials)

   Abstract Optical metasurfaces have been widely investigated in recent years as a means to tailor the wavefronts of externally incident light for passive device applications. At the same time, their use in active optoelectronic devices such as light emitters is far less established. This work explores their ability to control the radiation properties of a nearby continuous ensemble of randomly oriented incoherent dipole sources via near‐field interactions. Specifically, a film of colloidal quantum dots is deposited on a plasmonic metasurface consisting of a 1D array of metallic nanoantennas on a metal film. The array is designed to introduce a linear phase profile upon reflection, and a bi‐periodic nanoparticle arrangement is introduced to ensure adequate sampling of the desired phase gradient. Highly directional radiation patterns are correspondingly obtained from the quantum dots at an enhanced emission rate. The underlying radiation mechanism involves the near‐field excitation of surface plasmon polaritons at the metal film, and their selective diffractive scattering by the metasurface into well‐collimated beams along predetermined geometrically tunable directions. These results underscore the distinctive ability of metasurfaces to control radiation properties directly at the source level, which is technologically significant for the continued miniaturization and large‐scale integration of optoelectronic devices. 

   more » « less
4. Templated Growth of a Homochiral Thin Film Oxide

   https://doi.org/10.1021/acsnano.0c00398  

   Schilling, Alex C.; Therrien, Andrew J.; Hannagan, Ryan T.; Marcinkowski, Matthew D.; Kress, Paul L.; Patel, Dipna A.; Balema, Tedros A.; Larson, Amanda M.; Lucci, Felicia R.; Coughlin, Benjamin P.; et al (April 2020, ACS Nano)

   Chiral surfaces are of growing interest for enantioselective adsorption and reactions. While metal surfaces can be prepared with a wide range of chiral surface orientations, chiral oxide surface preparation is much more challenging. Herein, we demonstrate that the chirality of a metal surface can be used to direct the homochiral growth of a thin film chiral oxide. Specifically, we study the chiral ‘29’ copper oxide, formed by oxidizing a Cu(111) single crystal at 650 K. Surface structure spread single crystals which expose a continuous distribution of surface orientations as a function of position on the crystal, enabled us to systematically investigate the mechanism of chirality transfer between metal and oxide with high-resolution scanning tunneling microscopy. We discovered that the local underlying metal facet directs the orientation and chirality of the oxide overlayer. Importantly, single homochiral domains of the ‘29’ oxide were found in areas where the Cu step edges that templated growth were ≤20 nm apart. We used this information to select a Cu(239 241 246) oriented single crystal and demonstrate that a ‘29’ oxide surface can be grown in homochiral domains by templating from the subtle chirality of the underlying metal crystal. This work demonstrates how a small degree of chirality induced by very slight misorientation of a metal surface (~1 sites/ 20 nm2) can be amplified by oxidation to yield a homochiral oxide with a regular array of chiral oxide pores (~75 sites/ 20 nm2). This offers a general approach for making chiral oxide surfaces via oxidation of an appropriately miscut metal surface. 

   more » « less
5. Excitation and detection of coherent sub-terahertz magnons in ferromagnetic and antiferromagnetic heterostructures

   https://doi.org/10.1038/s41524-022-00851-2  

   Zhuang, Shihao; Hu, Jia-Mian (August 2022, npj Computational Materials)

   Abstract Excitation of coherent high-frequency magnons (quanta of spin waves) is critical to the development of high-speed magnonic devices. Here we computationally demonstrate the excitation of coherent sub-terahertz (THz) magnons in ferromagnetic (FM) and antiferromagnetic (AFM) thin films by a photoinduced picosecond acoustic pulse. Analytical calculations are also performed to reveal the magnon excitation mechanism. Through spin pumping and spin-charge conversion, these magnons can inject sub-THz charge current into an adjacent heavy-metal film which in turn emits electromagnetic (EM) waves. Using a dynamical phase-field model that considers the coupled dynamics of acoustic waves, spin waves, and EM waves, we show that the emitted EM wave retains the spectral information of all the sub-THz magnon modes and has a sufficiently large amplitude for near-field detection. These predictions indicate that the excitation and detection of sub-THz magnons can be realized in rationally designed FM or AFM thin-film heterostructures via ultrafast optical-pump THz-emission-probe spectroscopy. 

   more » « less