An official website of the United States government
Dynamic optical modulation in response to stimuli provides exciting opportunities for designing novel sensing, actuating, and authentication devices. Here, we demonstrate that the reversible swelling and deswelling of crosslinked polymer colloidal spheres in response to pH and temperature changes can be utilized to drive the assembly and disassembly of the embedded gold nanoparticles (AuNPs), inducing their plasmonic coupling and decoupling and, correspondingly, color changes. The multi‐responsive colloids are created by depositing a monolayer of AuNPs on the surface of resorcinol‐formaldehyde (RF) nanospheres, then overcoating them with an additional RF layer, followed by a seeded growth process to enlarge the AuNPs and reduce their interparticle separation to induce significant plasmonic coupling. This configuration facilitates dynamic modulation of plasmonic coupling through the reversible swelling/deswelling of the polymer spheres in response to pH and temperature changes. The rapid and repeatable transitions between coupled and decoupled plasmonic states of AuNPs enable reversible color switching when the polymer spheres are in colloidal form or embedded in hydrogel substrates. Furthermore, leveraging the photothermal effect and stimuli‐responsive plasmonic coupling of the embedded AuNPs enables the construction of hybrid hydrogel films featuring switchable anticounterfeiting patterns, showcasing the versatility and potential of this multi‐stimuli‐responsive plasmonic system.
more »
« less
Reusable Structural Colored Nanostructure for Powerless Temperature and Humidity Sensing
Abstract Nanostructured materials have enabled new ways of controlling the light–matter interaction, opening new routes for exciting applications, in display technologies and colorimetric sensing, among others. In particular, metallic nanoparticles permit the production of color structures out of colorless materials. These plasmonic structural colors are sensitive to the environment and thus offer an interesting platform for sensing. Here, a self‐assembly of aluminum nanoparticles in close proximity of a mirror is spaced by an ultrathin poly(N‐isopropylacrylamide) (PNIPAM) layer. Hybridizing the plasmonic system with the active polymer layer, a thermoresponsive gap‐plasmon architecture is formed that transduces changes in the temperature and relative humidity of the environment into color changes. By harnessing the environmentally induced structural changes of PNIPAM, it was estimated from the finite difference time domain simulation that the resonance can be tuned 7 nm per every 1 nm change in thickness, resulting in color variation. Importantly, these fully reversible changes can be used for reusable powerless humidity and temperature colorimetric sensing. Crucially if condensation on the structure happens, the polymer layer is deformed beyond recovery and the colors are washed away. We leverage this effect to produce tamper‐proof dew labels that a straightforward smartphone app can read by taking a picture.
more »
« less
- Award ID(s):
- 1920840
- PAR ID:
- 10419094
- Publisher / Repository:
- Wiley Blackwell (John Wiley & Sons)
- Date Published:
- Journal Name:
- Advanced Optical Materials
- Volume:
- 11
- Issue:
- 16
- ISSN:
- 2195-1071
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract Thermoresponsive nanoparticles (NPs) represent an important hybrid material comprising functional NPs with temperature‐sensitive polymer ligands. Strikingly, significant discrepancies in optical and catalytic properties of thermoresponsive noble‐metal NPs have been reported, and have yet to be unraveled. Reported herein is the crafting of Au NPs, intimately and permanently ligated by thermoresponsive poly(N‐isopropylacrylamide) (PNIPAM), in situ using a starlike block copolymer nanoreactor as model system to resolve the paradox noted above. As temperature rises, plasmonic absorption of PNIPAM‐capped Au NPs red‐shifts with increased intensity in the absence of free linear PNIPAM, whereas a greater red‐shift with decreased intensity occurs in the presence of deliberately introduced linear PNIPAM. Remarkably, the absence or addition of free linear PNIPAM also accounts for non‐monotonic or switchable on/off catalytic performance, respectively, of PNIPAM‐capped Au NPs.more » « less
-
Abstract Plasmonic structural color, in which vivid colors are generated via resonant nanostructures made of common plasmonic materials, such as noble metals have fueled worldwide interest in backlight-free displays. However, plasmonic colors that were withstanding ultrahigh temperatures without damage remain an unmet challenge due to the low melting point of noble metals. Here, we report the refractory hafnium nitride (HfN) plasmonic crystals that can generate full-visible color with a high image resolution of ∼63,500 dpi while withstanding a high temperature (900 °C). Plasmonic colors that reflect visible light could be attributed to the unique features in plasmonic HfN, a high bulk plasmon frequency of 3.1 eV, whichcould support localized surface plasmon resonance (LSPR) in the visible range. By tuning the wavelength of the LSPR, the reflective optical response can be controlled to generate the colors from blue to red across a wide gamut. The novel refractory plasmonic colors pave the way for emerging applications ranging from reflective displays to solar energy harvesting systems.more » « less
-
Abstract Shape morphing of stimuli‐responsive composite hydrogels has received considerable attention in different research fields. Although various multilayer structures with dissimilar materials are studied to achieve shape morphing, combining swellable hydrogel layers with non‐swellable layers results in issues with interface adhesion and structural integrity. In this study, single‐hydrogel‐based bilayer actuators comprising poly(N‐isopropylacrylamide) (PNIPAM) matrices and graphene oxide (GO)–PNIPAM hinges are presented. Upon temperature rising, the PNIPAM hydrogel acts as the passive layer due to the formation of dense microstructures near the surface (i.e., the skin layer effect), whereas the GO‐PNIPAM hydrogel functions as the active layer, maintaining porous due to structural modification by the presence of GO. Under light exposure, the GO‐PNIPAM hinges experience selective heating due to the photothermal effect of GO. Consequently, the resulting bilayer structures exhibit programmable dual‐responsive 3D shape morphing. Additionally, the folding kinetics of these actuators can be adjusted based on the applied stimulus (temperature changes or light), as they are driven by different mechanisms, the skin layer, or photothermal effects, respectively. Furthermore, the hinge‐based bilayer structures demonstrate walking and steering locomotion by light exposure. This approach can lead to advances in soft robotics, biomimetic systems, and autonomous soft actuators in hydrogel‐based systems.more » « less
-
Abstract The biological chromophore xanthommatin (Xa) contributes to the yellow, red, and brown colors and hues in cephalopods and arthropods. In many cases, Xa is also present as part of or coupled to supramolecular nanostructures, whose function has yet to be fully explored. To investigate how such structural elements impact the perceived color of these natural chromophores, amorphous photonic assemblies containing Xa chemically coupled to 100 nm polystyrene nanoparticles (PS100‐XA) are fabricated, and blended with pure polystyrene (PS) nanoparticles of varying sizes. Structural colors are observed comprising these bidispersed colloidal assemblies that are tuned by the particle size of PS nanoparticles, the concentration of PS100‐XA, the local environment, and the method of assembly. In all cases, the addition of PS100‐XA regulates the color hue and contrast of the resultant assemblies by increasing light absorption while minimizing incoherent light scattering. Taken together, the results demonstrate how biochromes like Xa can enhance the color intensity and the diversity in colors present in common photonic assemblies.more » « less
