skip to main content


Title: An Intercomparison of Large‐Eddy Simulations of a Convection Cloud Chamber Using Haze‐Capable Bin and Lagrangian Cloud Microphysics Schemes
Abstract

Recent in situ observations show that haze particles exist in a convection cloud chamber. The microphysics schemes previously used for large‐eddy simulations of the cloud chamber could not fully resolve haze particles and the associated processes, including their activation and deactivation. Specifically, cloud droplet activation was modeled based on Twomey‐type parameterizations, wherein cloud droplets were formed when a critical supersaturation for the available cloud condensation nuclei (CCN) was exceeded and haze particles were not explicitly resolved. Here, we develop and adapt haze‐capable bin and Lagrangian microphysics schemes to properly resolve the activation and deactivation processes. Results are compared with the Twomey‐type CCN‐based bin microphysics scheme in which haze particles are not fully resolved. We find that results from the haze‐capable bin microphysics scheme agree well with those from the Lagrangian microphysics scheme. However, both schemes significantly differ from those from a CCN‐based bin microphysics scheme unless CCN recycling is considered. Haze particles from the recycling of deactivated cloud droplets can strongly enhance cloud droplet number concentration due to a positive feedback in haze‐cloud interactions in the cloud chamber. Haze particle size distributions are more realistic when considering solute and curvature effects that enable representing the complete physics of the activation process. Our study suggests that haze particles and their interactions with cloud droplets may have a strong impact on cloud properties when supersaturation fluctuations are comparable to mean supersaturation, as is the case in the cloud chamber and likely is the case in the atmosphere, especially in polluted conditions.

 
more » « less
Award ID(s):
2133229
PAR ID:
10419766
Author(s) / Creator(s):
 ;  ;  ;  ;  
Publisher / Repository:
DOI PREFIX: 10.1029
Date Published:
Journal Name:
Journal of Advances in Modeling Earth Systems
Volume:
15
Issue:
5
ISSN:
1942-2466
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. Abstract

    Numerical simulations of turbulent moist Rayleigh–Bénard convection driving CCN activation and droplet growth in the laboratory Pi chamber are discussed. Supersaturation fluctuations come from isobaric mixing of warm and humid air rising from the lower boundary with colder air featuring lower water vapor concentrations descending from the upper boundary. Lagrangian particle–based microphysics is used to represent the growth of haze CCN and cloud droplets with kinetic, solute, and surface tension effects included. Dry CCN spectra in the range between 2- and 200-nm radii from field observations are considered. Increasing the total CCN concentration from pristine to polluted conditions results in an increase in the droplet concentration and reduction in the mean droplet radius and spectral width. These are in agreement with Pi chamber observations and numerical simulations, as well as with numerous past studies of CCN cloud-base activation in natural clouds. The key result is that a relatively small fraction of the available CCN is activated in the Pi chamber fluctuating supersaturations, from about a half in the pristine case to only a 10th in the polluted case. The activation fraction as a function of the dry CCN radius is similar in all simulations, close to zero at the CCN small end, increasing to a maximum at CCN radius around 50 nm, and decreasing to close to zero at the large CCN end. This is explained as too small supersaturations to activate small CCN as in natural clouds and insufficient time to allow large CCN reaching the critical radius.

    Significance Statement

    Impact of turbulence on the formation and growth of cloud droplets is an important cloud physics problem. Laboratory experiments in the Michigan Technological University cloud chamber provide key insights into this problem. Numerical simulations of cloud chamber processes discussed in this paper complement laboratory experiments by providing insights difficult or impossible to obtain in the laboratory. The study contrasts the formation and growth of cloud droplets in the laboratory cloud chamber with processes taking place in natural clouds. The differences documented in this paper pose questions concerning the impact of turbulence on the formation and growth of cloud droplets as a result of interactions of clouds with their environment.

     
    more » « less
  2. Abstract

    Bin microphysics schemes are useful tools for cloud simulations and are often considered to provide a benchmark for model intercomparison. However, they may experience issues with numerical diffusion, which are not well quantified, and the transport of hydrometeors depends on the choice of advection scheme, which can also change cloud simulation results. Here, an atmospheric large‐eddy simulation model is adapted to simulate a statistically steady‐state cloud in a convection cloud chamber under well‐constrained conditions. Two bin microphysics schemes, a spectral bin method and the method of moments, as well as several advection methods for the transport of the microphysical variables are employed for model intercomparison. Results show that different combinations of microphysics and advection schemes can lead to considerable differences in simulated cloud properties, such as cloud droplet number concentration. We find that simulations using the advection scheme that suffers more from numerical diffusion tends to have a smaller droplet number concentration and liquid water content, while simulation with the microphysics scheme that suffers more from numerical diffusion tends to have a broader size distribution and thus larger mean droplet sizes. Sensitivities of simulations to bin resolution, spatial resolution, and temporal resolution are also tested. We find that refining the microphysical bin resolution leads to a broader cloud droplet size distribution due to the advection of hydrometeors. Our results provide insight for using different advection and microphysics schemes in cloud chamber simulations, which might also help understand the uncertainties of the schemes used in atmospheric cloud simulations.

     
    more » « less
  3. Abstract

    Collisional growth of cloud droplets is an essential yet uncertain process for drizzle and precipitation formation. To improve the quantitative understanding of this key component of cloud‐aerosol‐turbulence interactions, observational studies of collision‐coalescence in a controlled laboratory environment are needed. In an existing convection‐cloud chamber (the Pi Chamber), collisional growth is limited by low liquid water content and short droplet residence times. In this work, we use numerical simulations to explore various configurations of a convection‐cloud chamber that may intensify collision‐coalescence. We employ a large‐eddy simulation (LES) model with a size‐resolved (bin) cloud microphysics scheme to explore how cloud properties and the intensity of collision‐coalescence are affected by the chamber size and aspect ratio, surface roughness, side‐wall wetness, side‐wall temperature arrangement, and aerosol injection rate. Simulations without condensation and evaporation within the domain are first performed to explore the turbulence dynamics and wall fluxes. The LES wall fluxes are used to modify the Scalar Flux‐budget Model, which is then applied to demonstrate the need for non‐uniform side‐wall temperature (two side walls as warm as the bottom and the two others as cold as the top) to maintain high supersaturation in a tall chamber. The results of LES with full cloud microphysics reveal that collision‐coalescence is greatly enhanced by employing a taller chamber with saturated side walls, non‐uniform side‐wall temperature, and rough surfaces. For the conditions explored, although lowering the aerosol injection rate broadens the droplet size distribution, favoring collision‐coalescence, the reduced droplet number concentration decreases the frequency of collisions.

     
    more » « less
  4. A minimalist model of microphysical properties in cloudy Rayleigh-Bénard convection is developed based on mass and number balances for cloud droplets growing by vapor condensation. The model is relevant to a turbulent mixed-layer in which a steady forcing of supersaturation can be defined, e.g., a model of the cloudy boundary layer or a convection-cloud chamber. The model assumes steady injection of aerosol particles that are activated to form cloud droplets, and the removal of cloud droplets through sedimentation. Simplifying assumptions include the consideration of mean properties in steady state, neglect of coalescence growth, and no detailed representation of the droplet size distribution. Closed-form expressions for cloud droplet radius, number concentration, and liquid water content are derived. Limits of fast and slow microphysics, compared to the turbulent mixing time scale, are explored, and resulting expressions for the scaling of microphysical properties in fast and slow regimes are obtained. Scaling of microphysics with layer thickness is also explored, suggesting that liquid water content and cloud droplet number concentration increase, and mean droplet radius decreases with increasing layer thickness. Finally, the analytical model is shown to compare favorably to solutions of the fully-coupled set of governing ordinary differential equations that describe the system, and the predicted power law for liquid water mixing ratio versus droplet activation rate is observed to be consistent with measurements from the Pi convection-cloud chamber. 
    more » « less
  5. Abstract

    Cloud formation in the Pi Convection–Cloud Chamber is achieved via ionization in humid conditions, without the injection of aerosol particles to serve as cloud condensation nuclei (CCN). Abundant ions, turbulence, and supersaturated water vapor combine to produce new particles, which grow to become CCN sized and eventually are activated to form clouds. Coupling between the new particle formation and cloud droplets causes predator-prey type oscillations in aerosol and droplet concentrations under turbulent conditions. Leading terms are identified in the budgets for Aitken and accumulation mode aerosols and for cloud droplets. The cloud coupling is proposed to be a result of cloud-induced runaway CCN production through aerosol scavenging. The experiments suggest potential applications to marine cloud brightening, in which ions rather than sea-salt aerosols are generated.

     
    more » « less