An official website of the United States government
When a liquid drop strikes a deep pool of a target liquid, an impact crater opens while the liquid of the drop decelerates and spreads on the surface of the crater. When the density of the drop is larger than the target liquid, we observe mushroom-shaped instabilities growing at the interface between the two liquids. We interpret this instability as a spherical Rayleigh–Taylor instability due to the deceleration of the interface, which exceeds the ambient gravity. We investigate experimentally the effect of the density contrast and the impact Froude number, which measures the importance of the impactor kinetic energy to gravitational energy, on the instability and the resulting mixing layer. Using backlighting and planar laser-induced fluorescence methods, we obtain the position of the air–liquid interface, an estimate of the instability wavelength, and the thickness of the mixing layer. We derive a model for the evolution of the crater radius from an energy conservation. We then show that the observed dynamics of the mixing layer results from a competition between the geometrical expansion of the crater, which tends to thin the layer, and entrainment related to the instability, which increases the layer thickness. The mixing caused by this instability has geophysical implications for the impacts that formed terrestrial planets. Extrapolating our scalings to planets, we estimate the mass of silicates that equilibrates with the metallic core of the impacting bodies.
more »
« less
Velocity field and cavity dynamics in drop impact experiments
Drop impact experiments allow the modelling of a wide variety of natural processes, from raindrop impacts to planetary impact craters. In particular, interpreting the consequences of planetary impacts requires an accurate description of the flow associated with the cratering process. In our experiments, we release a liquid drop above a deep liquid pool to investigate simultaneously the dynamics of the cavity and the velocity field produced around the air–liquid interface. Using particle image velocimetry, we analyse quantitatively the velocity field using a shifted Legendre polynomial decomposition. We show that the velocity field is more complex than considered in previous models, in relation to the non-hemispherical shape of the crater. In particular, the velocity field is dominated by degrees 0 and 1, with contributions from degree 2, and is independent of the Froude and the Weber numbers when these numbers are large enough. We then derive a semi-analytical model based on the Legendre polynomial expansion of an unsteady Bernoulli equation coupled with a kinematic boundary condition at the crater boundary. This model explains the experimental observations and can predict the time evolution of both the velocity field and the shape of the crater, including the initiation of the central jet.
more »
« less
- Award ID(s):
- 2020249
- PAR ID:
- 10422039
- Date Published:
- Journal Name:
- Journal of Fluid Mechanics
- Volume:
- 962
- ISSN:
- 0022-1120
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
We experimentally investigate liquid infiltration into horizontally oriented fiber arrays imposed by sequential drop impacts. Our experimental system is inspired by mammalian fur coats, and our results provide insight to how we expect natural fibers to respond to falling drops and the structure innate to this multiscale covering. Two successive drop impacts are filmed striking three-dimensional-printed fiber arrays with varying densities, surface wettability, and fixed fiber diameter. The penetration depth and the lateral width of drop spreading within fiber layers are functions of drop displacement relative to the liquid already within the array as well as the drop Weber number. Hydrophobic fibers more effectively prevent an increase in penetration depth by the second impacting drop at low impact Weber numbers, whereas hydrophilic fibers ensure lower liquid penetration depth into the array as the Weber number increases. Impact outcomes, such as penetration depth and lateral spreading, are insensitive to impact eccentricity between the first and second drops at high experimental Weber numbers. As expected, denser, staggered fibers reduce infiltration, preventing the entire drop mass from entering the array. Fragmentation of the first drop, which is promoted by hydrophobicity, larger inter-fiber spacing, and higher drop impact velocity, limits increases in lateral spreading and penetration depth of the liquid mass from a subsequent drop.more » « less
-
Key Points The shock physics code iSALE is successfully benchmarked against subsonic water impact experiments A scaling law is proposed for the crater depth as a function of the Mach and Froude numbers which are varied as independent parameters In the limit of high Mach numbers, our scaling suggests that the maximum crater depth is controlled by the sound velocity and gravity, but not by the impact speedmore » « less
-
Aerobreakup of drops is a fundamental two-phase flow problem that is essential to many spray applications. A parametric numerical study was performed by varying the gas stream velocity, focusing on the regime of moderate Weber numbers, in which the drop deforms to a forward bag. When the bag is unstable, it inflates and disintegrates into small droplets. Detailed numerical simulations were conducted using the volume-of-fluid method on an adaptive octree mesh to investigate the aerobreakup dynamics. Grid-refinement studies show that converged three-dimensional simulation results for drop deformation and bag formation are achieved by the refinement level equivalent to 512 cells across the initial drop diameter. To resolve the thin liquid sheet when the bag inflates, the mesh is refined further to 2048 cells across the initial drop diameter. The simulation results for the drop length and radius were validated against previous experiments, and good agreement was achieved. The high-resolution results of drop morphological evolution were used to identify the different phases in the aerobreakup process, and to characterize the distinct flow features and dominant mechanisms in each phase. In the early time, the drop deformation and velocity are independent of the Weber number, and a new internal-flow deformation model, which respects this asymptotic limit, has been developed. The pressure and velocity fields around the drop were shown to better understand the internal flow and interfacial instability that dictate the drop deformation. Finally, the impact of drop deformation on the drop dynamics was discussed.more » « less
-
Accurate prediction of the dynamics and deformation of freely moving drops is crucial for numerous droplet applications. When the Weber number is finite but below a critical value, the drop deviates from its spherical shape and deforms as it is accelerated by the gas stream. Since aerodynamic drag on the drop depends on its shape oscillation, accurately modeling the drop shape evolution is essential for predicting the drop's velocity and position. In this study, 2D axisymmetric interface-resolved simulations were performed to provide a comprehensive dataset for developing a data-driven model. Parametric simulations were conducted by systematically varying the drop diameter and free-stream velocity, achieving wide ranges of Weber and Reynolds numbers. The instantaneous drop shapes obtained in simulations are characterized by spherical harmonics. Temporal data of the drag and modal coefficients are collected from the simulation data to train a {Nonlinear Auto-Regressive models with eXogenous inputs} (NARX) neural network model. The overall model consists of two multi-layer perceptron networks, which predict the modal coefficients and the drop drag, respectively. The drop shape can be reconstructed with the predicted modal coefficients. The model predictions are validated against the simulation data in the testing set, showing excellent agreement for the evolutions of both the drop shape and drag.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1017/jfm.2023.297
