skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Driving Maneuver Anomaly Detection Based on Deep Auto-Encoder and Geographical Partitioning
This paper presents GeoDMA , which processes the GPS data from multiple vehicles to detect anomalous driving maneuvers, such as rapid acceleration, sudden braking, and rapid swerving. First, an unsupervised deep auto-encoder is designed to learn a set of unique features from the normal historical GPS data of all drivers. We consider the temporal dependency of the driving data for individual drivers and the spatial correlation among different drivers. Second, to incorporate the peer dependency of drivers in local regions, we develop a geographical partitioning algorithm to partition a city into several sub-regions to do the driving anomaly detection. Specifically, we extend the vehicle-vehicle dependency to road-road dependency and formulate the geographical partitioning problem into an optimization problem. The objective of the optimization problem is to maximize the dependency of roads within each sub-region and minimize the dependency of roads between any two different sub-regions. Finally, we train a specific driving anomaly detection model for each sub-region and perform in-situ updating of these models by incremental training. We implement GeoDMA in Pytorch and evaluate its performance using a large real-world GPS trajectories. The experiment results demonstrate that GeoDMA achieves up to 8.5% higher detection accuracy than the baseline methods.  more » « less
Award ID(s):
2008837
PAR ID:
10422416
Author(s) / Creator(s):
; ; ; ;
Date Published:
Journal Name:
ACM Transactions on Sensor Networks
Volume:
19
Issue:
2
ISSN:
1550-4859
Page Range / eLocation ID:
1 to 22
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; (, Transportation research)
    null (Ed.)
    For energy-efficient Connected and Automated Vehicle (CAV) Eco-driving control on signalized arterials under uncertain traffic conditions, this paper explicitly considers traffic control devices (e.g., road markings, traffic signs, and traffic signals) and road geometry (e.g., road shapes, road boundaries, and road grades) constraints in a data-driven optimization-based Model Predictive Control (MPC) modeling framework. This modeling framework uses real-time vehicle driving and traffic signal data via Vehicle-to-Infrastructure (V2I) and Vehicle-to-Vehicle (V2V) communications. In the MPC-based control model, this paper mathematically formulates location-based traffic control devices and road geometry constraints using the geographic information from High-Definition (HD) maps. The location-based traffic control devices and road geometry constraints have the potential to improve the safety, energy, efficiency, driving comfort, and robustness of connected and automated driving on real roads by considering interrupted flow facility locations and road geometry in the formulation. We predict a set of uncertain driving states for the preceding vehicles through an online learning-based driving dynamics prediction model. We then solve a constrained finite-horizon optimal control problem with the predicted driving states to obtain a set of Eco-driving references for the controlled vehicle. To obtain the optimal acceleration or deceleration commands for the controlled vehicle with the set of Eco-driving references, we formulate a Distributionally Robust Stochastic Optimization (DRSO) model (i.e., a special case of data-driven optimization models under moment bounds) with Distributionally Robust Chance Constraints (DRCC) with location-based traffic control devices and road geometry constraints. We design experiments to demonstrate the proposed model under different traffic conditions using real-world connected vehicle trajectory data and Signal Phasing and Timing (SPaT) data on a coordinated arterial with six actuated intersections on Fuller Road in Ann Arbor, Michigan from the Safety Pilot Model Deployment (SPMD) project. 
    more » « less
  2. ; ; (, IEEE Conference on Communications and Network Security (CNS))
    Low-cost and easily obtained Global Navigation Satellite System (e.g., GPS) receivers are broadly embedded into various devices for providing location information. In this work, we develop a secret key establishment by utilizing the driving data obtained from GPS. Those data may exhibit randomness as the driver may alternatively step on the accelerator and brake pedals from time to time with varying force in order to adapt to the road traffic during driving. A driving vehicle provides a physically secure boundary as the devices co-located within the vehicle can observe common GPS data, as opposed to devices that do not experience the trip. We implement this key establishment in a real-world environment on top of off-the-shelf GPS-equipped devices as well as widely deployed GPS modules each connected with Raspberry Pi. Extensive experimental results show that when a user drives around 1.36 km for 1.32 minutes on average under moderate traffic conditions, two legitimate GPS-equipped devices in the vehicle can successfully establish a 128-bit secret key. Meanwhile, an attacker following the target vehicle is unable to establish a secret key with the legitimate devices. 
    more » « less
  3. ; ; ; ; (, Vehicles)
    Road authorities worldwide can leverage the advances in vehicle technology by continuously monitoring their roads’ conditions to minimize road maintenance costs. The existing methods for carrying out road condition surveys involve manual observations using standard survey forms, performed by qualified personnel. These methods are expensive, time-consuming, infrequent, and can hardly provide real-time information. Some automated approaches also exist but are very expensive since they require special vehicles equipped with computing devices and sensors for data collection and processing. This research aims to leverage the advances in vehicle technology in providing a cheap and real-time approach to carry out road condition monitoring (RCM). This study developed a deep learning model using the You Only Look Once, Version 5 (YOLOv5) algorithm that was trained to capture and categorize flexible pavement distresses (FPD) and reached 95% precision, 93.4% recall, and 97.2% mean Average Precision. Using vehicle built-in cameras and GPS sensors, these distresses were detected, images were captured, and locations were recorded. This was validated on campus roads and parking lots using a car featured with a built-in camera and GPS. The vehicles’ built-in technologies provided a more cost-effective and efficient road condition monitoring approach that could also provide real-time road conditions. 
    more » « less
  4. ; ; ; (, Proceedings of the Human Factors and Ergonomics Society Annual Meeting)
    The rapid growth of autonomous vehicles is expected to improve roadway safety. However, certain levels of vehicle automation will still require drivers to ‘takeover’ during abnormal situations, which may lead to breakdowns in driver-vehicle interactions. To date, there is no agreement on how to best support drivers in accomplishing a takeover task. Therefore, the goal of this study was to investigate the effectiveness of multimodal alerts as a feasible approach. In particular, we examined the effects of uni-, bi-, and trimodal combinations of visual, auditory, and tactile cues on response times to takeover alerts. Sixteen participants were asked to detect 7 multimodal signals (i.e., visual, auditory, tactile, visual-auditory, visual-tactile, auditory-tactile, and visual-auditory-tactile) while driving under two conditions: with SAE Level 3 automation only or with SAE Level 3 automation in addition to performing a road sign detection task. Performance on the signal and road sign detection tasks, pupil size, and perceived workload were measured. Findings indicate that trimodal combinations result in the shortest response time. Also, response times were longer and perceived workload was higher when participants were engaged in a secondary task. Findings may contribute to the development of theory regarding the design of takeover request alert systems within (semi) autonomous vehicles. 
    more » « less
  5. ; ; ; ; ; ; ; (, IEEE Internet of Things Journal)
    In metropolitan areas with heavy transit demands, electric vehicles (EVs) are expected to be continuously driving without recharging downtime. Wireless Power Transfer (WPT) provides a promising solution for in-motion EV charging. Nevertheless, previous works are not directly applicable for the deployment of in-motion wireless chargers due to their different charging characteristics. The challenge of deploying in-motion wireless chargers to support the continuous driving of EVs in a metropolitan road network with the minimum cost remains unsolved. We propose CatCharger to tackle this challenge. By analyzing a metropolitan-scale dataset, we found that traffic attributes like vehicle passing speed, daily visit frequency at intersections (i.e., landmarks) and their variances are diverse, and these attributes are critical to in-motion wireless charging performance. Driven by these observations, we first group landmarks with similar attribute values using the entropy minimization clustering method, and select candidate landmarks from the groups with suitable attribute values. Then, we use the Kernel Density Estimator (KDE) to deduce the expected vehicle residual energy at each candidate landmark and consider EV drivers’ routing choice behavior in charger deployment. Finally, we determine the deployment locations by formulating and solving a multi-objective optimization problem, which maximizes vehicle traffic flow at charger deployment positions while guaranteeing the continuous driving of EVs at each landmark. Trace-driven experiments demonstrate that CatCharger increases the ratio of driving EVs at the end of a day by 12.5% under the same deployment cost. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email