skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: A single-parameter hygroscopicity model for functionalized insoluble aerosol surfaces
Abstract. The impact of molecular level surface chemistry for aerosol water-uptake and droplet growth is not well understood. In this work, spherical, nonporous, monodisperse polystyrene latex (PSL) particles treated with different surface functional groups are exploited to isolate the effects of aerosol surface chemistry for droplet activation. PSL is effectively water insoluble and changes in the particle surface may be considered acritical factor in the initial water uptake of water-insoluble material. The droplet growth of two surface modified types of PSL (PSL-NH2 andPSL-COOH) along with plain PSL was measured in a supersaturated environmentwith a Cloud Condensation Nuclei Counter (CCNC). Three droplet growth models – traditional Köhler (TK), Flory–Huggins Köhler (FHK) and the Frenkel–Halsey–Hill adsorption theory (FHH-AT) were compared with experimental data. The experimentally determined single hygroscopicity parameter, κ, was found within the range from 0.002 to 0.04. The traditional Köhler prediction assumes Raoult's law solute dissolution and underestimates the water-uptake ability of the PSL particles. FHK can be applied to polymeric aerosol; however, FHK assumes that the polymer is soluble and hydrophilic. Thus, the FHK model generates a negative result for hydrophobic PSL and predicts non-activation behavior that disagrees with the experimental observation. The FHH-AT model assumes that a particle is water insoluble and can be fit with two empirical parameters (AFHH and BFHH). The FHH-AT prediction agrees with the experimental data and can differentiate the water uptake behavior of the particles owing to surface modification of PSL surface. PSL-NH2 exhibits slightly higher hygroscopicity than the PSL-COOH, whereas plain PSL is the least hygroscopic among the three. This result is consistent with the polarity of surface functional groups and their affinity to water molecules. Thus, changes in AFHH and BFHH can be quantified when surface modification is isolated for the study of water-uptake. The fitted AFHH for PSL-NH2, PSL-COOH, and plain PSL is 0.23, 0.21, and 0.18 when BFHH is unity. To simplify the use of FHH-AT for use in cloud activation models, we also present and test a new single parameter framework for insoluble compounds, κFHH. κFHH is within 5 % agreement ofthe experimental data and can be applied to describe a single-parameterhygroscopicity for water-insoluble aerosol with surface modified properties.  more » « less
Award ID(s):
2003927 1708337
PAR ID:
10423546
Author(s) / Creator(s):
; ;
Date Published:
Journal Name:
Atmospheric Chemistry and Physics
Volume:
22
Issue:
19
ISSN:
1680-7324
Page Range / eLocation ID:
13219 to 13228
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. (, Atmospheric chemistry and physics discussion)
    In this work, we studied the Cloud Condensation nuclei (CCN) activity and subsaturated droplet growth of Phthalic acid (PTA), isophthalic acid, (IPTA) and terephthalic acid (TPTA), significant benzene polycarboxylic acids and structural isomers found in the atmosphere. Köhler Theory can be effectively applied for hygroscopicity analysis of PTA due to its higher aqueous solubility compared to IPTA and TPTA. As with other hygroscopicity studies of partially water-soluble and effectively water insoluble species, the supersaturated and subsaturated hygroscopicity derived from (KT) principles do not agree. To address the disparities in the sub- and supersaturated droplet growth, we developed a new analytical framework called the Hybrid Activity Model (HAM). HAM incorporates the aqueous solubility of a solute within an adsorption-based activation framework. Frenkel-Halsey-Hill (FHH)-Adsorption Theory (FHH-AT) was combined with the aqueous solubility of the compound to develop HAM. Analysis from HAM was validated using laboratory measurements of pure PTA, IPTA, TPTA and PTA-IPTA internal mixtures. Furthermore, the results generated using HAM were tested against traditional KT and FHH-AT to compare their water uptake predictive capabilities. A single-hygroscopicity parameter was also developed based on the HAM framework. Results show that the HAM based hygroscopicity parameter based can successfully simulate the water uptake behavior of the pure and internally mixed samples. Results indicate that the HAM framework may be applied to atmospheric aerosols of varying chemical structures and aqueous solubility. 
    more » « less
  2. ; ; ; (, Environmental Science: Atmospheres)
    Polycatechol and polyguaiacol are light-absorbing and water-insoluble particles that efficiently form from iron-catalyzed reactions with aromatic compounds from biomass burning emissions. Little quantitative information is known about their water uptake and cloud or haze droplet formation ability. In this study, polycatechol and polyguaiacol particles were synthesized in the laboratory, and their cloud condensation nucleation efficiencies were investigated under sub- and supersaturated relative humidity (RH) conditions using a hygroscopicity tandem differential mobility analyzer (H-TDMA) and a cloud condensation nuclei counter (CCNC), respectively. Experimental results show that both polymeric materials are slightly hygroscopic and that their single hygroscopicity parameter ( κ ) ranges from 0.03 to 0.25, which is within the κ range for secondary organic aerosols (SOA). Polycatechol is more hygroscopic than polyguaiacol, which is explained by differences in their structure. Polyguaiacol has similar water uptake as other insoluble organic compounds, and droplet formation is modelled well with Brunauer–Emmett–Teller (BET) or Frankel Hill Hershey-Adsorption Isotherm theory (FHH-AT). Both polymeric materials are not strongly surface active in range of 0.5 to 30 g L −1 , and thus differences in subsaturated and supersaturated hygroscopicity measurement are not attributed to the presence of surface-active materials. Instead, it is due to the solubility limits of both chemicals and H-TDMA being driven by water adsorption. The implications of these results are discussed in the context of aerosol–cloud interactions from the hygroscopicity of aerosols from primary and secondary sources. 
    more » « less
  3. ; ; ; ; ; (, Atmospheric Chemistry and Physics)
    Abstract. Insoluble atmospheric aerosol, such as mineral dust, hasbeen identified as an important contributor to the cloud droplet numberconcentration and indirect climate effect. However, empirically derivedFrenkel–Halsey–Hill (FHH) water adsorption parameters remain the largestsource of uncertainty in assessing the effect of insoluble aerosol onclimate using the FHH activation theory (FHH-AT). Furthermore, previouslyreported FHH water adsorption parameters for illite and montmorillonitedetermined from water adsorption measurements below 100 % RH do notsatisfactorily agree with values determined from FHH-AT analysis ofexperimental cloud condensation nuclei (CCN) measurements undersupersaturated conditions. The work reported here uses previously reportedexperimental water adsorption measurements for illite and montmorilloniteclays (Hatch et al., 2012, 2014) to show that improvedanalysis methods that account for the surface microstructure are necessaryto obtain better agreement of FHH parameters between water adsorption andexperimental CCN-derived FHH parameters. 
    more » « less
  4. ; ; ; ; ; ; ; (, Aerosol Science and Technology)
    Nicole Riemer (Ed.)
    Aerosol particles in the atmosphere have the ability to uptake water and form droplets. The droplets formed can interact with solar radiation (indirect effect of aerosols) and influence the net radiative forcing. However, the magnitude of change in radiative forcing due to the indirect effect of aerosols remains uncertain due to the high variance in aerosol composition and mixing states, both spatial and temporally. As such, there is a need to measure the water-uptake of different aerosol particle groups under controlled conditions to gain insight into the water-uptake of complex ambient systems. In this work, the water-uptake (hygroscopicity) of internally and externally mixed ammonium sulfate – organic binary mixtures were directly measured via three methods and compared to droplet growth prediction models. We found that subsaturated water-uptake of ammonium sulfate-organic mixtures agreed with their supersaturated hygroscopicity, and mixing state information was able to be retrieved at both humidity regimes. In addition, we found that solubility-adjusted models may not be able to capture the water-uptake of viscous particles, and for soluble organic aerosol particles, bulk solubility may not be comparable to their solubility in a droplet. This work highlights the importance of using multiple complementary water-uptake measurement instruments to get a clearer picture of mixed aerosol particle hygroscopicity, especially for increasingly complex systems. 
    more » « less
  5. (, Aerospace science and technology)
    Ambient aerosol particles can undergo dynamic mixing processes as they coagulate with particles from other air masses and emission sources. Therefore, aerosols exist in a spectrum, from externally mixed to internally mixed. The mixing state of aerosols can affect their ability to uptake water (hygroscopicity) and their cloud condensation nuclei (CCN) activity, modifying their contribution to the planet’s total radiative budget. However, current water-uptake measurement methods may not be able to capture the complex mixing state. In this research, the dynamic mixing process was simulated by the particle-resolved aerosol model PartMC and also created by experiments in a laminar flow mixing tube. The mixing evolution of ammonium sulfate and sucrose binary mixtures were observed along with the changes in their water uptake properties expressed as the single hygroscopicity parameter, κ. The use of a mixing simulation in conjunction with experiments allow for better identification of the particle mixing state and the particle water uptake and show that no one kappa value can capture the complexity of mixing across the mixed particle size distribution. In other words, the PartMC simulations can be used as a guiding tool to interpret a system’s mixing state based on its experimental droplet activation spectra. This work demonstrates the importance of the integration and use of mixing models to aid in mixing state determination and hygroscopicity measurements of mixed systems. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email