skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: ∼8.5 μ m-emitting InP-based quantum cascade lasers grown on GaAs by metal-organic chemical vapor deposition
Room-temperature, pulsed-operation lasing of 8.5  μm-emitting InP-based quantum cascade lasers (QCLs), with low threshold-current density and watt-level output power, is demonstrated from structures grown on (001) GaAs substrates by metal-organic chemical vapor deposition. Prior to growing the laser structure, which contains a 35-stage In 0.53 Ga 0.47 As/In 0.52 Al 0.48 As lattice-matched active-core region, a ∼2  μm-thick nearly fully relaxed InP buffer with strained 1.6 nm-thick InAs quantum-dot-like dislocation-filter layers was grown. A smooth terminal buffer-layer surface, with roughness as low as 0.4 nm on a 10 × 10  μm 2 scale, was obtained, while the estimated threading-dislocation density was in the mid-range × 10 8  cm −2 . A series of measurements, on lasers grown on InP metamorphic buffer layers (MBLs) and on native InP substrates, were performed for understanding the impact of the buffer-layer's surface roughness, residual strain, and threading-dislocation density on unipolar devices such as QCLs. As-cleaved devices, grown on InP MBLs, were fabricated as 25  μm × 3 mm deep-etched ridge guides with lateral current injection. The results are pulsed maximum output power of 1.95 W/facet and a low threshold-current density of 1.86 kA/cm 2 at 293 K. These values are comparable to those obtained from devices grown on InP: 2.09 W/facet and 2.42 kA/cm 2 . This demonstrates the relative insensitivity of the device-performance metrics on high residual threading-dislocation density, and high-performance InP-based QCLs emitting near 8  μm can be achieved on lattice-mismatched substrates.  more » « less
Award ID(s):
1806285
PAR ID:
10427858
Author(s) / Creator(s):
; ; ; ; ; ; ; ; ; ;
Date Published:
Journal Name:
Applied Physics Letters
Volume:
121
Issue:
17
ISSN:
0003-6951
Page Range / eLocation ID:
171103
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; ; ; ; ; (, Applied Physics Letters)
    This study presents the growth and characterization of an 8.1 μm-emitting, InGaAs/AlInAs/InP-based quantum cascade laser (QCL) formed on an InP-on-Si composite template by metalorganic chemical vapor deposition (MOCVD). First, for the composite-template formation, a GaAs buffer layer was grown by solid-source molecular-beam epitaxy on a commercial (001) GaP/Si substrate, thus forming a GaAs/GaP/Si template. Next, an InP metamorphic buffer layer (MBL) structure was grown atop the GaAs/GaP/Si template by MOCVD, followed by the MOCVD growth of the full QCL structure. The top-surface morphology of the GaAs/GaP/Si template before and after the InP MBL growth was assessed via atomic force microscopy, over a 100 μm2 area, and no antiphase domains were found. The average threading dislocation density (TDD) for the GaAs/GaP/Si template was found to be ∼1 × 109 cm−2, with a slightly lower defect density of ∼7.9 × 108 cm−2 after the InP MBL growth. The lasing performance of the QCL structure grown on Si was compared to that of its counterpart grown on InP native substrate and found to be quite similar. That is, the threshold-current density of the QCL on Si, for deep-etched ridge-guide devices with uncoated facets, is somewhat lower than that for its counterpart on native InP substrate, 1.50 vs 1.92 kA/cm2, while the maximum output power per facet is 1.64 vs 1.47 W. These results further demonstrate the resilience of QCLs to relatively high residual TDD values. 
    more » « less
  2. ; ; ; ; ; ; ; ; ; ; et al (, 2019 Device Research Conference)
    null (Ed.)
    Recently there has been renewed interest in resonant tunnel diodes (RTD) owing to the demonstration of repeatable room temperature negative differential resistance (RT-NDR) [1], [2] and high peak current densities [3] in GaN-based RTDs. While most of the successful demonstrations of RT-NDR have been from device structures grown on low dislocation-density, freestanding (FS) GaN substrates, there have been a few reports of repeatable RT-NDR from GaN-based RTDs grown on GaN templates on sapphire [4], [5], which have significantly higher densities of threading dislocations (TDs) than FS GaN substrates, but much lower cost. Furthermore, due to the large spontaneous and piezoelectric charge found at the heterointerfaces in III-nitrides, GaN-based RTDs, such as the one illustrated in Fig. 1(a), have highly unusual energy band diagrams, even at 0V bias [Fig. 1(b)]. However, observations of RT-NDR in GaN RTDs on GaN templated sapphire substrates have been restricted to devices of very small active area, typically less than 10 μm 2 [4], [5]. 
    more » « less
  3. ; ; ; ; ; ; ; ; ; (, Advanced Optical Materials)
    Abstract Electrically pumped lasing from hybrid organic–inorganic metal‐halide perovskite semiconductors could lead to nonepitaxial diode lasers that are tunable throughout the visible and near‐infrared spectrum; however, a viable laser diode architecture has not been demonstrated to date. Here, an important step toward this goal is achieved by demonstrating two distinct distributed feedback light‐emitting diode architectures that achieve low threshold, optically pumped lasing. Bottom‐ and top‐emitting perovskite light‐emitting diodes are fabricated on glass and Si substrates, respectively, using a polydimethylsiloxane stamp in the latter case to nanoimprint a second‐order distributed feedback grating directly into the methylammonium lead iodide active layer. The devices exhibit room temperature thresholds as low as ≈6 µJ cm−2, a peak external quantum efficiency of ≈0.1%, and a maximum current density of ≈2 A cm−2that is presently limited by degradation associated with excessive leakage current. In this low current regime, electrical injection does not adversely affect the optical pump threshold, leading to a projected threshold current density of ≈2 kA cm−2. Operation at low temperature can significantly decrease this threshold, but must overcome extrinsic carrier freeze‐out in the doped organic transport layers to maintain a reasonable drive voltage. 
    more » « less
  4. ; ; (, AIP Advances)
    Six periods of 2-nm-thick In0.15Ga0.85N/13-nm-thick GaN blue emitting multi-quantum-well (MQW) layers are grown on sapphire (Al2O3) and silicon (Si) substrates. X-ray diffraction, Raman spectroscopy, atomic force microscopy, temperature-dependent photoluminescence (PL), Micro-PL, and time-resolved PL are used to compare the structural and optical properties, and the carrier dynamics of the blue emitting active layers grown on Al2O3 and Si substrates. Indium clustering in the MQW layers is observed to be more pronounced on Al2O3 than those on Si as revealed through investigating band-filling effects of emission centers, S-shaped peak emission energy shifts with increasing temperature, and PL intensity-peak energy spatial nonuniformity correlations. The smaller indium clustering effects in MQW on Si are attributed to the residual tensile strain in the GaN buffer layer, which decreases the compressive strain and thus the piezoelectric polarization field in the InGaN quantum wells. Despite a 30% thinner total epitaxial thickness of 3.3 µm, MQW on Si exhibits a higher IQE than those on Al2O3 in terms of internal quantum efficiency (IQE) at temperatures below 250 K, and a similar IQE at 300 K (30% vs 33%). These results show that growth of blue emitting MQW layers on Si is a promising approach compared to those conventionally grown on Al2O3. 
    more » « less
  5. ; ; ; ; ; ; ; (, Proceedings of the SPIE)
    Chemicals are best recognized by their unique wavelength specific optical absorption signatures in the molecular fingerprint region from λ=3-15μm. In recent years, photonic devices on chips are increasingly being used for chemical and biological sensing. Silicon has been the material of choice of the photonics industry over the last decade due to its easy integration with silicon electronics as well as its optical transparency in the near-infrared telecom wavelengths. Silicon is optically transparent from 1.1 μm to 8 μm with research from several groups in the mid-IR. However, intrinsic material losses in silicon exceed 2dB/cm after λ~7μm (~0.25dB/cm at λ=6μm). In addition to the waveguiding core, an appropriate transparent cladding is also required. Available core-cladding choices such as Ge-GaAs, GaAs-AlGaAs, InGaAs-InP would need suspended membrane photonic crystal waveguide geometries. However, since the most efficient QCLs demonstrated are in the InP platform, the choice of InGaAs-InP eliminates need for wafer bonding versus other choices. The InGaAs-InP material platform can also potentially cover the entire molecular fingerprint region from λ=3-15μm. At long wavelengths, in monolithic architectures integrating lasers, detectors and passive sensor photonic components without wafer bonding, compact passive photonic integrated circuit (PIC) components are desirable to reduce expensive epi material loss in passive PIC etched areas. In this paper, we consider miniaturization of waveguide bends and polarization rotators. We experimentally demonstrate suspended membrane subwavelength waveguide bends with compact sub-50μm bend radius and compact sub-300μm long polarization rotators in the InGaAs/InP material system. Measurements are centered at λ=6.15μm for sensing ammonia 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email