skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: CoBF: Coordinated Beamforming in Dense mmWave Networks
With MIMO and enhanced beamforming features, IEEE 802.11ay is poised to create the next generation of mmWave WLANs that can provide over 100 Gbps data rate. However, beamforming between densely deployed APs and clients incurs unacceptable overhead. On the other hand, the absence of up-to-date beamforming information restricts the diversity gains available through MIMO and multi-users, reducing the overall network capacity. This paper presents a novel approach of "coordinated beamforming" (called CoBF) where only a small subset of APs are selected for beamforming in the 802.11ay mmWave WLANs. Based on the concept of uncertainty, CoBF predicts the APs whose beamforming information is likely outdated and needs updating. The proposed approach complements the existing per-link beamforming solutions and extends their effectiveness from link-level to network-level. Furthermore, CoBF leverages the AP uncertainty to create MU-MIMO groups through interference-aware scheduling in 802.11ay WLANs. With extensive experimentation and simulations, we show that CoBF can significantly reduce beamforming overhead and improve network capacity for 802.11ay WLANs.  more » « less
Award ID(s):
2045885
PAR ID:
10431625
Author(s) / Creator(s):
; ; ;
Date Published:
Journal Name:
Proceedings of the ACM on Measurement and Analysis of Computing Systems
Volume:
7
Issue:
2
ISSN:
2476-1249
Page Range / eLocation ID:
1 to 26
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; ; ; ; (, IEEE Communications Surveys & Tutorials)
    Millimeter-wave (mmWave) with large spectrum available is considered as the most promising frequency band for future wireless communications. The IEEE 802.11ad and IEEE 802.11ay operating on 60 GHz mmWave are the two most expected wireless local area network (WLAN) technologies for ultra-high-speed communications. For the IEEE 802.11ay standard still under development, there are plenty of proposals from companies and researchers who are involved with the IEEE 802.11ay task group. In this survey, we conduct a comprehensive review on the medium access control layer (MAC) related issues for the IEEE 802.11ay, some cross-layer between physical layer (PHY) and MAC technologies are also included. We start with MAC related technologies in the IEEE 802.11ad and discuss design challenges on mmWave communications, leading to some MAC related technologies for the IEEE 802.11ay. We then elaborate on important design issues for IEEE 802.11ay. Specifically, we review the channel bonding and aggregation for the IEEE 802.11ay, and point out the major differences between the two technologies. Then, we describe channel access and channel allocation in the IEEE 802.11ay, including spatial sharing and interference mitigation technologies. After that, we present an in-depth survey on beamforming training (BFT), beam tracking, single-user multiple-input-multiple-output (SU-MIMO) beamforming and multi-user multiple-input-multiple-output (MU-MIMO) beamforming. Finally, we discuss some open design issues and future research directions for mmWave WLANs. We hope that this paper provides a good introduction to this exciting research area for future wireless systems. 
    more » « less
  2. ; ; ; (, IEEE Workshop on Signal Processing Systems (SiPS))
    Millimeter-wave (mmWave) cell-free massive multiuser (MU) multiple-input multiple-output (MIMO) systems combine the large bandwidths available at mmWave frequencies with the improved coverage of cell-free systems. However, to combat the high path loss at mmWave frequencies, user equipments (UEs) must form beams in meaningful directions, i.e., to a nearby access point (AP). At the same time, multiple UEs should avoid transmitting to the same AP to reduce MU interference. We propose an interference-aware method for beam alignment (BA) in the cell-free mmWave massive MU-MIMO uplink. In the considered scenario, the APs perform full digital receive beamforming while the UEs perform analog transmit beamforming. We evaluate our method using realistic mmWave channels from a commercial ray-tracer, showing the superiority of the proposed method over omnidirectional transmission as well as over methods that do not take MU interference into account. 
    more » « less
  3. ; ; ; (, 2021 18th Annual IEEE International Conference on Sensing, Communication, and Networking (SECON))
    null (Ed.)
    Wireless local area networks (WLANs) are a key component of the telecommunications infrastructure in our society. While many solutions have been produced to improve their downlink throughput, the techniques for enhancing their uplink throughput remain limited. The stagnation can be attributed to the lack of fine-grained inter-node synchronization due to the hardware limitation of most devices. In this paper, we present an uplink distributed multiple-input-and-multiple-output scheme (termed UD-MIMO) for WLANs to enable concurrent uplink transmission in the absence of fine-grained inter-node synchronization. The enabling technique behind UD-MIMO is a practical solution to decoding uplink packets from asynchronous users. UD-MIMO makes it possible for WLANs to significantly improve their uplink throughput while not requiring tight internode synchronization. We have built a prototype of UD-MIMO on a wireless testbed and demonstrate its compatibility with commercial off-the-shelf Atheros 802.11 client devices (with modified Linux driver). Our experimental results show that, for a WLAN with 8 APs in a conference room, UD-MIMO offers 3.4× throughput compared to interference-avoidance approach. 
    more » « less
  4. ; ; ; ; (, ACM)
    This position paper explores the challenges and opportunities for high-quality immersive volumetric video streaming for multiple users over millimeter-wave (mmWave) WLANs. While most of the previous work has focused on single-user streaming, there is a growing need for multi-user immersive applications such as virtual collaboration, classroom education, teleconferencing, etc. While mmWave wireless links can provide multi-gigabit per second data rates, they suffer from blockages and high beamforming overhead. This paper investigates an environment-driven approach to address the challenges. It presents a comprehensive research agenda that includes developing a collaborative 3D scene reconstruction process, material identification, ray tracing, blockage mitigation, and cross-layer multi-user video rate adaptation. Our preliminary results show the feasibility and identify the limitations of existing solutions. Finally, we discuss the open challenges of implementing a practical system based on the proposed research agenda. 
    more » « less
  5. ; ; ; (, IEEE International Symposium on Local and Metropolitan Area Networks)
    Millimeter-wave communication is a highly promising technology to deliver multi-gigabit-per-second transmission rates for next-generation wireless LANs (WLANs). To achieve such ultra-high throughput performance in indoor scenarios, line-of-sight (LoS) connectivity becomes a critical requirement. Prior work has proposed access point (AP) mobility as an approach to improve LoS conditions and, thereby, approach optimum mmWave WLAN performance. In this work, we present a comprehensive simulation study of linear AP mobility that investigates various dimensions, including the number of mobile APs, the placement of the mobile AP platforms, and the length of the platforms. The results show how WLAN performance varies across these dimensions and also compares the results against a varying number of static APs to quantity the performance gains achievable from mobility. The results show that even 2 or 3 mobile APs can significantly outperform a much larger number of static APs and that deploying up to 3 mobile APs in a room brings substantial performance gains. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email