skip to main content

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Dissecting 3D Printing for Engineering Design Process Education of High School Preservice Teachers
3D printing (3DP) has been becoming more and more popular throughout the education system from Kindergarten to University. High school is a critical period for students to decide their imminent university major selection which in turn will impact their future career choices. High school students are usually intrigued by hands-on tool such as 3DP which is also an important contributor to other courses such as robotics. The recent years have seen more investment and availability of 3DP in high schools, especially Career and Technical Education (CTE) programs. However, mere availability of 3DP is not enough for teachers to fully utilize its potential in their classrooms. While basic 3DP skills can be obtained through a few hours of training, the basic training is insufficient to ensure effective teaching Engineering Design Process (EDP) at the high school level. To address this problem, this project develops an EDP course tightly integrated with 3DP for preservice teachers (PST) who are going to enter the workforce in high schools. Engineering design process (EDP) has become an essential part for preservice teachers (PST), especially for high school STEM. 3DP brought transformative change to EDP which is an iterative process that needs virtual/physical prototyping. The new PST course on EDP will be purposefully integrated with an in-depth discussion of 3DP. The approach is to dissect a 3D printer’s hardware, explain each component’s function, introduce each component’s manufacturing methods, describe possible defects, and elucidate what works and what does not. This has at least four benefits: 1) PSTs will know what is possibly wrong when a printer or printing process fails, 2) PSTs will learn more manufacturing processes besides 3DP that can be used to support engineering design prototyping, 3) PSTs will know how to design something that can meet the manufacturing constraints, i.e., can be actually fabricated, and 4) reduce errors and frustrations caused by failed design and failed prints which happen frequently to novices in 3DP. After graduation, PSTs will bring the knowledge to their future high schools and will be more confident in teaching engineering design, reverse engineering, prototype development, manufacturing, and technology. The developed course will be implemented and assessed in a future semester.  more » « less
Award ID(s):
2141674
PAR ID:
10437119
Author(s) / Creator(s):
Date Published:
Journal Name:
American Society of Engineering Education Annual Conference 2023
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; ; ; ; ; ( , Society for Information Technology and Teacher Education (SITE))
    Preservice teachers (PSTs) in an educational foundations course were tasked with leading elementary students in an engineering design challenge. To explore different approaches for helping the PSTs develop competence in engineering education, two implementation methods were tested. In Spring 2022, PSTs collaborated with undergraduate engineering students to develop carnival-themed design challenge lessons. In Fall 2022, PSTs worked with their PST classmates to teach a professionally prepared engineering lesson focused on designing plastic filters. PSTs’ knowledge of engineering and engineering pedagogy were compared across the two semesters using an exploratory approach. Both groups showed increases in engineering knowledge and engineering pedagogical knowledge. Item-level differences suggest unique benefits to each approach providing insight for teacher educators designing interventions to prepare PSTs to integrate engineering into elementary education. 
    more » « less
  2. ( , Journal of science teacher education)
    As a result of the increased inclusion of engineering and computer science standards for K-6 schools nationwide, there is a need to better understand how teacher educators can help develop preservice teachers’ (PSTs’) teaching self-efficacy in these areas. Ed+gineering provides novel opportunities for PSTs to experience teaching and learning engineering and coding content by building COVID-companion robots. Growing evidence supports robotics as a powerful approach to STEM learning for PSTs. In this study, Ed+gineering examined three cases to explore this overarching question: In what ways did PSTs’ virtual robotics project experience develop their self-efficacy for teaching engineering and coding? Three PST cases were examined, within the context of their work with other team members (i.e., undergraduate engineering student(s), 5th graders). To understand each of three PSTs’ virtual robotics project experiences, multiple data sources were collected and analyzed which includes mid- and post-semester CATME, end of course short-answer reflections, follow up interviews (including a modified Big Five personality inventory), and Zoom session recordings. Elementary PSTs Brenda, Erica, and Sarah experienced various levels of commitment and engagement in their five Zoom sessions. These factors, along with other personal and external influences, contributed to Bandura’s four identified sources of self-efficacy. This study examines these contributing factors to create an initial working model of how PSTs develop teaching self-efficacy. In this conference session, science teacher educators will learn more about this model and pedagogical decisions that seemed to influence PST’s self-efficacy for teaching engineering and computer science. 
    more » « less
  3. ( , Annual meeting program American Educational Research Association)
    Gestures are an integral component of mathematics classroom discourse. There is a need to classify the types of gestures that teachers use according to their purposes towards supporting and extending students’ mathematical thinking. We analyzed 16 algebra tutoring sessions between pre-service teachers (PSTs) and high school students to categorize the PSTs’ gestures. We identified 10 categories of PST gestures that we roughly organized into three supercategories: gestures that facilitate shared attention and communication, gestures that emphasize written visual representations, and gestures that support verbal explanations. A taxonomy of gestures based on their purposes will enable further analyses of teacher gesturing and help preservice and practicing teachers use gestures in more purposeful ways. 
    more » « less
  4. ; ( , Proceedings of the Annual Conference on Research in Undergraduate Mathematics Education)
    Karunakaran, S. S. ; Higgins, A. (Ed.)
    Preparing prospective secondary teachers (PSTs) to teach mathematics with a focus on reasoning and proving is an important goal for teacher education programs. A capstone course, Mathematical Reasoning and Proving for Secondary Teachers, was designed to address this goal. One component of the course was a school-based experience in which the PSTs designed and taught four proof-oriented lessons in local schools, video recorded these lessons, and reflected on them. In this paper, we focus on one PST – Nancy, who took the course in Fall 2020 during the pandemic, when the school-based experience moved online. We analyzed how Nancy’s Mathematical Knowledge for Teaching Proof (MKT-P) evolved through her attempts to teach proof online and through repeated cycles of reflection. 
    more » « less
  5. ; ; ( , ASEE Conferences)
    Despite recent progress in the adoption of engineering at the K-12 level, the scarcity of high-quality engineering curricula remains a challenge. With support from a previous NSF grant, our research team iteratively developed the three-year middle school engineering curricula, STEM-ID. Through a series of contextualized challenges, the 18-week STEM-ID curricula incorporate foundational mathematics and science skills and practices and advanced manufacturing tools such as computer aided design (CAD) and 3D printing, while introducing engineering concepts like pneumatics, aeronautics, and robotics. Our current project, supported by an NSF DRK-12 grant, seeks to examine the effectiveness of STEM-ID when implemented in diverse schools within a large school district in the southeastern United States. This paper will present early findings of the project’s implementation research conducted over two school years with a total of ten engineering teachers in nine schools. Guided by the Innovation Implementation framework (Century & Cassata, 2014), our implementation research triangulates observation, interview, and survey data to describe overall implementation of STEM-ID as well as implementation of six critical components of the curricula: engaging students in the engineering design process (EDP), math-science integration, collaborative group work, contextualized challenges, utilization of advanced manufacturing technology, and utilization of curriculum materials. Implementation data provide clear evidence that each of the critical components of STEM-ID were evident as the curricula were enacted in participating schools. Our data indicate strong implementation of four critical components (utilization of materials, math-science integration, collaborative group work, and contextualized challenges) across teachers. Engaging students in the EDP and advanced-manufacturing technology were implemented, to varying degrees, by all but two teachers. As expected, implementation of critical components mirrored overall implementation patterns, with teachers who completed more of the curricula tending to implement the critical components more fully than those who did not complete the curricula. In addition to tracking implementation of critical components, the project is also interested in understanding contextual factors that influence enactment of the curricula, including characteristics of the STEM-ID curricula, teachers, and organizations (school and district). Interview and observation data suggest a number of teacher characteristics that may account for variations in implementation including teachers’ organization and time management skills, self-efficacy, and pedagogical content knowledge (PCK). Notably, prior teaching experience did not consistently translate into higher completion rates, emphasizing the need for targeted support regardless of teachers' backgrounds. This research contributes valuable insights into the challenges and successes of implementing engineering curricula in diverse educational settings. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email