Abstract Humans can physically interact with other humans adeptly. Some overground interaction tasks, such as guiding a partner across a room, occur without visual and verbal communication, which suggests that the information exchanges occur through sensing movements and forces. To understand the process of motor communication during overground physical interaction, we hypothesized that humans modulate the mechanical properties of their arms for increased awareness and sensitivity to ongoing interaction. For this, we used an overground interactive robot to guide a human partner across one of three randomly chosen paths while occasionally providing force perturbations to measure the arm stiffness. We observed that the arm stiffness was lower at instants when the robot’s upcoming trajectory was unknown compared to instants when it was predicable - the first evidence of arm stiffness modulation for better motor communication during overground physical interaction.
more »
« less
A robot for overground physical human-robot interaction experiments
Many anticipated physical human-robot interaction (pHRI) applications in the near future are overground tasks such as walking assistance. For investigating the biomechanics of human movement during pHRI, this work presents Ophrie, a novel interactive robot dedicated for physical interaction tasks with a human in overground settings. Unique design requirements for pHRI were considered in implementing the one-arm mobile robot, such as the low output impedance and the ability to apply small interaction forces. The robot can measure the human arm stiffness, an important physical quantity that can reveal human biomechanics during overground pHRI, while the human walks alongside the robot. This robot is anticipated to enable novel pHRI experiments and advance our understanding of intuitive and effective overground pHRI.
more »
« less
- Award ID(s):
- 2046552
- NSF-PAR ID:
- 10437401
- Editor(s):
- Ferretti, Gianni
- Date Published:
- Journal Name:
- PLOS ONE
- Volume:
- 17
- Issue:
- 11
- ISSN:
- 1932-6203
- Page Range / eLocation ID:
- e0276980
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
null (Ed.)We present a new design method that is tailored for designing a physical interactive robotic arm for overground physical interaction. Designing such robotic arms present various unique requirements that differ from existing robotic arms, which are used for general manipulation, such as being able to generate required forces at every point inside the workspace and/or having low intrinsic mechanical impedance. Our design method identifies these requirements and categorizes them into kinematic and dynamic characteristics of the robot and then ensures that these unique considerations are satisfied in the early design phase. The robot’s capability for use in such tasks is analyzed using mathematical simulations of the designed robot, and discussion of its dynamic characteristics is presented. With our proposed method, the robot arm is ensured to perform various overground interactive tasks with a human.more » « less
-
Effective physical human-robot interaction (pHRI) depends on how humans can communicate their intentions for movement with others. While it is speculated that small interaction forces contain significant information to convey the specific movement intention of physical humanhuman interaction (pHHI), the underlying mechanism for humans to infer intention from such small forces is largely unknown. The hypothesis in this work is that the sensitivity to a small interaction force applied at the hand is affected by the movement of the arm that is affected by the arm stiffness. For this, a haptic robot was used to provide the endpoint interaction forces to the arm of seated human participants. They were asked to determine one of the four directions of the applied robot interaction force without visual feedback. Variations of levels of interaction force as well as arm muscle contraction were applied. The results imply that human’s ability to identify and respond to the correct direction of small interaction forces was lower when the alignment of human arm movement with respect to the force direction was higher. In addition, the sensitivity to the direction of the small interaction force was high when the arm stiffness was low. It is also speculated that humans lower their arm stiffness to be more sensitive to smaller interaction forces. These results will help develop human-like pHRI systems for various applications.more » « less
-
Abstract Understanding the human motor control strategy during physical interaction tasks is crucial for developing future robots for physical human–robot interaction (pHRI). In physical human–human interaction (pHHI), small interaction forces are known to convey their intent between the partners for effective motor communication. The aim of this work is to investigate what affects the human’s sensitivity to the externally applied interaction forces. The hypothesis is that one way the small interaction forces are sensed is through the movement of the arm and the resulting proprioceptive signals. A pHRI setup was used to provide small interaction forces to the hand of seated participants in one of four directions, while the participants were asked to identify the direction of the push while blindfolded. The result shows that participants’ ability to correctly report the direction of the interaction force was lower with low interaction force as well as with high muscle contraction. The sensitivity to the interaction force direction increased with the radial displacement of the participant’s hand from the initial position: the further they moved the more correct their responses were. It was also observed that the estimated stiffness of the arm varies with the level of muscle contraction and robot interaction force.more » « less
-
Abstract In this paper, we study the effects of mechanical compliance on safety in physical human–robot interaction (pHRI). More specifically, we compare the effect of joint compliance and link compliance on the impact force assuming a contact occurred between a robot and a human head. We first establish pHRI system models that are composed of robot dynamics, an impact contact model, and head dynamics. These models are validated by Simscape simulation. By comparing impact results with a robotic arm made of a compliant link (CL) and compliant joint (CJ), we conclude that the CL design produces a smaller maximum impact force given the same lateral stiffness as well as other physical and geometric parameters. Furthermore, we compare the variable stiffness joint (VSJ) with the variable stiffness link (VSL) for various actuation parameters and design parameters. While decreasing stiffness of CJs cannot effectively reduce the maximum impact force, CL design is more effective in reducing impact force by varying the link stiffness. We conclude that the CL design potentially outperforms the CJ design in addressing safety in pHRI and can be used as a promising alternative solution to address the safety constraints in pHRI.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1371/journal.pone.0276980
