Metal cations are potent environmental pollutants that negatively impact human health and the environment. Despite advancements in sensor design, the simultaneous detection and discrimination of multiple heavy metals at sub‐nanomolar concentrations in complex analytical matrices remain a major technological challenge. Here, the design, synthesis, and analytical performance of three highly emissive conjugated polyelectrolytes (CPEs) functionalized with strong iminodiacetate and iminodipropionate metal chelates that operate in challenging environmental samples such as seawater are demonstrated. When coupled with array‐based sensing methods, these polymeric sensors discriminate among nine divalent metal cations (CuII, CoII, NiII, MnII, FeII, ZnII, CdII, HgII, and PbII). The unusually high and robust luminescence of these CPEs enables unprecedented sensitivity at picomolar concentrations in water. Unlike previous array‐based sensors for heavy metals using CPEs, the incorporation of distinct π‐spacer units within the polymer backbone affords more pronounced differences in each polymer's spectroscopic behavior upon interaction with each metal, ultimately producing better analytical information and improved differentiation. To demonstrate the environmental and biological utility, a simple two‐component sensing array is showcased that can differentiate nine metal cation species down to 500 × 10−12
Phosphate oxyanions play central roles in biological, agricultural, industrial, and ecological processes. Their high hydration energies and dynamic properties present a number of critical challenges limiting the development of sensing technologies that are cost‐effective, selective, sensitive, field‐deployable, and which operate in real‐time within complex aqueous environments. Here, a strategy that enables the fabrication of an electrolyte‐gated organic field‐effect transistor (EGOFET) is demonstrated, which overcomes these challenges and enables sensitive phosphate quantification in challenging aqueous environments such as seawater. The device channel comprises a composite layer incorporating a diketopyrrolopyrrole‐based semiconducting polymer and a π‐conjugated penta‐
- NSF-PAR ID:
- 10446387
- Publisher / Repository:
- Wiley Blackwell (John Wiley & Sons)
- Date Published:
- Journal Name:
- Advanced Electronic Materials
- Volume:
- 8
- Issue:
- 7
- ISSN:
- 2199-160X
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
more » « less
Abstract m in aqueous media and to 100 × 10−9m in seawater samples collected from the Gulf of Mexico. -
more » « less
Abstract Low‐cost biosensors that can rapidly and widely monitor plant nutritional levels will be critical for better understanding plant health and improving precision agriculture decision making. In this work, fully printed ion‐selective organic electrochemical transistors (OECTs) that can detect macronutrient concentrations in whole plant sap are described. Potassium, the most concentrated cation in the majority of plants, is selected as the target analyte as it plays a critical role in plant growth and development. The ion sensors demonstrate high current (170 µA dec−1) and voltage (99 mV dec−1) sensitivity, and a low limit of detection (10 × 10−6
m ). These OECT biosensors can be used to determine potassium concentration in raw sap and sap‐like aqueous environments demonstrating a log‐linear response within the expected physiological range of cations in plants. The performance of these printed devices enables their use in high‐throughput plant health monitoring in agricultural and ecological applications. -
Nutrient pollution remains one of the greatest threats to water quality and imposes numerous public health and ecological concerns. Phosphate, the most common form of phosphorus, is one of the key nutrients necessary for plant growth. However, phosphate concentration in water should be carefully monitored for environmental protection requirements. Hence, an easy-to-use, field-deployable, and reliable device is needed to measure phosphate concentrations in the field. In this study, an inexpensive dip strip is developed for the detection of low concentrations of phosphate in water and seawater. In this device, ascorbic acid/antimony reagent was dried on blotting paper, which served as the detection zone, and was followed by a wet chemistry protocol using the molybdenum method. Ammonium molybdate and sulfuric acid were separately stored in liquid form to significantly improve the lifetime of the device and enhance the reproducibility of its performance. The device was tested with deionized water and Sargasso Sea seawater. The limits of detection and quantification for the optimized device using a desktop scanner were 0.134 ppm and 0.472 ppm for phosphate in water and 0.438 ppm and 1.961 ppm in seawater, respectively. The use of the portable infrared lightbox previously developed at our lab improved the limits of detection and quantification by a factor of three and were 0.156 ppm and 0.769 ppm for the Sargasso Sea seawater. The device’s shelf life, storage conditions, and limit of detection are superior to what was previously reported for the paper-based phosphate detection devices.more » « less
-
more » « less
Abstract A novel surface modification approach is taken to cyanide‐sensing by using functionalized cellulose surface that is chemically modified by immobilizing cobalt(II)‐bis‐terpyridine complex on it. The cobalt(II)‐bis‐tpy complex can exhibit selective “naked eye” colorimetric detection of micromolar level cyanide in aqueous solution, where the visible red‐orange color of cobalt(II)‐bis‐tpy complex solution (aqueous) disappears in the presence of cyanide ions. In order to make the sensor more proficient and easy to use, these cobalt(II)‐bis‐tpy molecules are chemically grafted on the surface of microcrystalline cellulose and cellulose paper, which turns the color of functionalized cellulose orange‐red. Both of these colored cellulose powder and paper exhibit color loss in 10−6
m aqueous solution of potassium cyanide. This functionalized hybrid inorganic–organic paper offers an easy “dip and detect” cyanide sensing. -
more » « less
Abstract The presence of electron rich compounds such as amines added to the fluorescent methoxybinaphthalene boronic acid results in a dramatic increase in affinity of diols to the aryl boronic acid as well as in the augmented fluorescence response. This is likely the result of the change in boron geometry upon coordination with electron donor which facilitate the diols binding. Here, we demonstrate the role of amino alcohol additive in binding of saccharides by boronic acid‐based fluorescent sensor. We show that this strategy allows a poorly responsive sensor to become a highly sensitive probe for the detection of sugars, which could be used for classification of saccharides as well as for quantitative analysis in DMSO‐water solutions. The simple binaphthalene boronic acid sensor was particularly sensitive to
d ‐fructose (Ka =2.08×106), which allowed for identification of commercial sweetened beverages based on theird ‐fructose content. The same method was successfully used for the quantitative analysis ofd ‐fructose in soft beverages.
