skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: An efficient DC‐DC converter for inductive power transfer in low‐power sensor applications
Summary Inductive power transfer has become an emerging technology for its significant benefits in many applications, including mobile phones, laptops, electric vehicles, implanted bio‐sensors, and internet of things (IoT) devices. In modern applications, a direct current–direct current (DC–DC) converter is one of the essential components to regulate the output supply voltage for achieving the desired characteristics, that is, steady voltage with lower peak ripples. This paper presents a switched‐capacitor (SC) DC–DC converter using complementary architecture to provide a regulated DC voltage with an increased dynamic response. The proposed topology enhances the converter efficiency by decreasing the equivalent output resistance to half by connecting two symmetric SC single ladder converters. The proposed converter is designed using the standard 130‐nm BiCMOS process. The results show that the proposed architecture produces 327‐mV DC output with a rise time of 60.1 ns and consumes 3.449‐nW power for 1.0‐V DC supply. The output settling time is 43.6% lower than the single‐stage SC DC–DC converter with an input frequency of 200 MHz. The comparison results show that the proposed converter has a higher power conversion efficiency of 93.87%and a lower power density of 0.57 mW/mm2compared to the existing works.  more » « less
Award ID(s):
1813949
PAR ID:
10446398
Author(s) / Creator(s):
 ;  ;  ;  ;  
Publisher / Repository:
Wiley Blackwell (John Wiley & Sons)
Date Published:
Journal Name:
International Journal of Circuit Theory and Applications
Volume:
50
Issue:
8
ISSN:
0098-9886
Format(s):
Medium: X Size: p. 2887-2899
Size(s):
p. 2887-2899
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; (, 2018 IEEE 61st International Midwest Symposium on Circuits and Systems (MWSCAS))
    This paper proposes a complementary topology for Switched-Capacitor (SC) DC-DC converter to enhance the dynamic response. For battery charging unit with faster charging time requirement, one of the major restrictions comes from the equivalent output resistance of the SC DC-DC converter. By connecting one completely symmetric SC converter as complementary topology with the original single converter, the proposed SC DC-DC converter topology decreases the equivalent output resistance down to half. Simulated in 0.13-μm standard CMOS process, the simulation results show that this complementary SC converter gains faster dynamic response, shorter charging time, and higher energy-conversion efficiency. 
    more » « less
  2. ; ; ; ; (, 2020 IEEE Energy Conversion Congress and Exposition (ECCE))
    null (Ed.)
    A high-voltage-gain dc-dc converter topology is proposed for renewable energy applications. The proposed coupled-inductor-based high-gain dc-dc converter features reduced input current ripple. The semiconductor elements voltage spikes due to the leakage inductance are prevented through the use of a clamping circuit. The Clamping circuit helps recover the leakage inductance stored energy, which causes voltage spikes on the switch. This results in the selection of elements with lower voltage ratings. Power switches with lower voltage ratings lead to lower conduction losses and improved system efficiency. The DC component of the inductor magnetizing current is zero. Consequently, no energy is stored in the inductor core, and the losses are further reduced. 
    more » « less
  3. ; ; ; ; (, 2020 IEEE Applied Power Electronics Conference and Exposition (APEC))
    null (Ed.)
    A new high-voltage-gain non-isolated dc-dc topology for applications in renewable energies is proposed. A coupled inductor with three windings is used to increase the proposed topology voltage gain. In addition to increasing the voltage gain, the proposed topology also has other prominent features including continuous input current and zero dc magnetizing inductance current, which reduces the losses and size of coupled inductor core. Furthermore, the continuous input current guarantees a low-volume input filter, which is essential for renewable energy applications. The leakage inductor stored energy is recycled via the diode and capacitor and transferred to the converter output for increasing the efficiency and reducing voltage stresses on the converter components. 
    more » « less
  4. ; ; ; (, IEEE Open Journal of Power Electronics)
    Unfolding-based single-stage ac-dc converters offer benefits in terms of efficiency and power density due to the low-frequency operation of the Unfolder, resulting in negligible switching losses. However, the operation of the Unfolder results in time-varying dc voltages at the input of the subsequent dc-dc converter, complicating its soft-switching analysis. The complication is further enhanced due to the nonlinear nature of the output capacitance ( Coss ) of MOSFETs employed in the dc-dc converter. Furthermore, unlike two-stage topologies with a constant dc-link voltage, as seen in high-frequency grid-tied converters, grid voltage fluctuations also impact the dc input voltages of the dc-dc converter in unfolding-based systems. This work comprehensively analyzes the soft-switching phenomenon in the T-type primary bridge-based dc-dc converter used in unfolding-based topologies, considering all the aforementioned challenges. An energy-based methodology is proposed to determine the minimum zero-voltage switching (ZVS) current and ZVS time during various switching transitions of the T-type bridge. It is shown that the existing literature on the ZVS analysis of the T-type bridge-based resonant dc-dc converter, relying solely on capacitive energy considerations, substantially underestimates the required ZVS current values, with errors reaching up to 50%. The proposed analysis is verified through both simulation and hardware testing. The hardware testing is conducted on a 20-kW 3- ϕ unfolding-based ac-dc converter designed for high-power electric vehicle battery charging applications. The ZVS analysis is verified at various grid angles with the proposed analysis ensuring a complete ZVS operation of the ac-dc system throughout the grid cycle. 
    more » « less
  5. ; (, IEEE International Symposium on Circuits and Systems)
    null (Ed.)
    This paper presents an analytical model for calculating the output voltage and the power efficiency of multi-stage multi-output (MSMO) DC-DC converters (DDC) that use charge pump cells for boosting the voltage. Various cases such as multi-output current consumption and its effects on the output voltage and the power efficiency are studied. Based on the model, a tapered design approach is proposed that can bolster the power efficiency and lower the output voltage drop of MSMO DDCs. Moreover, a charge-pump-based DDC is introduced and designed to verify the proposed model. Simulation results using a standard high-voltage 180-nm CMOS technology affirms the accuracy of the presented model. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email