This article investigates the feasibility of using regenerative energy from braking trains to charge electric buses in the context of New York City’s (NYC) subway and electric bus networks. A case study centered around NYC’s system has been performed to evaluate the benefits and challenges pertaining to the use of the preexisting subway network as a power supply for its new all-electric buses. The analysis shows that charging electric buses via the subway system during subway off-peak periods does not hinder regular train operation. In addition, having the charging electric buses connected to the third rail allows for more regenerative braking energy (RBE) to be recuperated, decreasing the energy wasted throughout the system. It was also found that including a wayside energy storage system (WESS) reduces the overall substation peak power consumption.
Longitudinal Control Strategy for Connected Electric Vehicle with Regenerative Braking in Eco-Approach and Departure
The development of more sustainable urban transportation is prompting the need for better energy management techniques. Connected electric vehicles can take advantage of environmental information regarding the status of traffic lights. In this context, eco-approach and departure methods have been proposed in the literature. Integrating these methods with regenerative braking allows for safe, power-efficient navigation through intersections and crossroad layouts. This paper proposes rule- and fuzzy inference system-based strategies for a coupled eco-approach and departure regenerative braking system. This analysis is carried out through a numerical simulator based on a three-degree-of-freedom connected electric vehicle model. The powertrain is represented by a realistic power loss map in motoring and regenerative quadrants. The simulations aim to compare both longitudinal navigation strategies by means of relevant metrics: power, efficiency, comfort, and usage duty cycle in motor and generator modes. Numerical results show that the vehicle is able to yield safe navigation while focusing on energy regeneration through different navigation conditions.
more »
« less
- Award ID(s):
- 2038984
- NSF-PAR ID:
- 10447568
- Date Published:
- Journal Name:
- Applied Sciences
- Volume:
- 13
- Issue:
- 8
- ISSN:
- 2076-3417
- Page Range / eLocation ID:
- 5089
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
more » « less
-
Ellis, K. ; Ferrell, W. ; Knapp, J. (Ed.)There is no doubt that there is an increase in the penetration of electrical energy into the operation of high-speed railway systems (HSR). This is even more pronounced with the increasing trends in smart electric multiple units (EMU). The operational speed serves as a metric for punctuality and safety, as well as a critical element to maintain the balance between energy supply and consumption. The speed-based regenerative energy from EMU’s braking mode could be utilized in the restoration of system operation in the aftermath of a failure. This paper optimizes the system resiliency with respect to the operational speed for the purpose of restoration by minimizing the total cost of implementing recovery measures. By simultaneously valuating the dual-impact of any given fault on the speed deterioration level from the railway operation systems (ROS) side and the power supply and demand unbalance level from the railway power systems (RPS) side, this process develops an adaptive two-dimension risk assessment scheme for prioritizing the handling of different operational zones that are cascaded in the system. With the aid of an integrated speed-based resilience cost model, we determine the optimal resilience time, speed modification plan, and energy allocation strategy. The outcome from implementing this routine in a real-world HSR offers a pioneering decision-making strategy and perspective on optimizing the resilience of an integrated system.more » « less
-
Even though extensive studies have developed various eco-driving strategies for vehicle platoon to travel on urban roads with traffic signals, most of them focus on vehicle-level trajectory planning or speed advisory rather than real-time platoon-level closed-loop control. In addition, majority of existing efforts neglect the traffic and vehicle dynamic uncertainties to avoid the modeling and solution complexity. To make up these research gaps, this study develops a system optimal vehicle platooning control for eco-driving (SO-ED), which can guide a mixed flow platoon to smoothly run on the urban roads and pass the signalized intersections without sudden deceleration or red idling. The SO-ED is mathematically implemented by a hybrid model predictive control (MPC) system, including three MPC controllers and an MINLP platoon splitting switching signal. Based on the features of the system, this study uses active set method to solve the large-scale MPC controllers in real time. The numerical experiments validate the merits of the proposed SO-ED in smoothing the traffic flow and reducing energy consumption and emission at urban signalized intersections.more » « less
-
more » « less
Connected autonomous vehicles (CAVs) have emerged as a promising solution for enhancing transportation efficiency. However, the increased adoption of CAVs is expected to lead to a rise in transportation demand and, subsequently, higher energy consumption. In this context, electric CAVs (E-CAVs) present a significant opportunity to shape the future of efficient transportation systems. While conventional CAVs possess the potential to reduce fuel consumption, E-CAVs offer similar prospects but through distinct approaches. Notably, the control of acceleration and regenerative brakes in E-CAVs stands out as an area of immense potential for increasing efficiency, leveraging various control methods in conjunction with the cooperative and perception capabilities inherent in CAVs. To bridge this knowledge gap, this paper conducts a comprehensive survey of energy efficiency methods employed in conventional CAVs while also exploring energy efficiency strategies specifically tailored for E-CAVs.
-
Abstract This paper investigates temporal correlations in human driving behavior using real-world driving to improve speed forecasting accuracy. These correlations can point to a measurement weighting function with two parameters: a forgetting factor for past speed measurements that the vehicle itself drove with, and a discount factor for the speeds of vehicles ahead based on information from vehicle-to-vehicle communication. The developed weighting approach is applied to a vehicle speed predictor using polynomial regression, a prediction method well-known in the literature. The performance of the developed approach is then assessed in both real-world and simulated traffic scenarios for accuracy and robustness. The new weighting method is applied to an ecological adaptive cruise control system, and its influence is analyzed on the prediction accuracy and the performance of the ecological adaptive cruise control in an electric vehicle powertrain model. The results show that the new prediction method improves energy saving from the eco-driving by up to 4.7% compared to a baseline least-square-based polynomial regression. This is a 10% improvement over the constant speed/acceleration model, a conventional speed predictor.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.3390/app13085089
