Li‐air batteries are considered strong candidates for the next‐generation energy storage systems designed for electrical transportation. However, low cyclability and current rates are two major drawbacks that hinder them from further realization. These issues necessitate the discovery of novel materials to significantly enhance the redox process of discharge products. In this study, a novel catalytic system comprised of tin sulfide (SnS) nanoflakes as a solid catalyst and tin iodide (SnI2) as a dual‐functional electrolyte additive is discovered. This system enables operating the battery at high current rates up to 10 000 mA g−1(corresponding to 1 mA cm−2). The SnS catalyst shows outstanding catalytic activity for both oxygen reduction and evolution reactions compared to carbon, noble metals, and other transition metal dichalcogenides. It also exhibits good structural integrity at high rates. The computations indicate numerous possible oxygen reduction sites without oxygen dissociations on the SnS surface through solution mechanism that is likely responsible for the formation of Li2O2. The calculations also indicate that the role of the SnI2is not only reacting with the lithium anode to provide protection but reducing the charge potential by promoting catalytic decomposition of the Li2O2. This work provides new novel additives for designing high‐rate Li‐air batteries.
The morphology and crystallinity of electrode materials have a major effect on their charge carrier storage properties when applied in rechargeable batteries. While nanosizing electrode particles (with larger surface area) and maintaining electrode integrity are both good for performance enhancement, they seem to contradict each other and are challenging to balanced. Herein, electrode particles consisting of numerous nanograins with uniform crystalline orientation are designed to guarantee both high surface area and high structural integrity, allowing the significant improvement of Li+storage kinetics and performance. Applying this “mesocrystallizing” strategy to an NiCo2O4‐based anode, results in various degrees of pseudocapacitance response, the long‐term cyclability and rate performance of this material are also significantly enhanced. Impressively, the mesocrystalline NiCo2O4electrode exhibits a high specific capacity of 1403 mAh g–1after 200 cycles at 1.6 A g–1(a rate of 1.8 C). The growth mechanism of mesocrystalline materials with different morphologies is identified to be a topotactic structural transition process featuring a gradual edge‐to‐core corrosion process. This work presents an important synthetic clue to balance the morphology and crystallinity of battery electrode materials for their performance optimization and is expected to inspire future structural design for battery materials beyond the one prototyped here.
more » « less- NSF-PAR ID:
- 10450147
- Publisher / Repository:
- Wiley Blackwell (John Wiley & Sons)
- Date Published:
- Journal Name:
- Advanced Energy Materials
- Volume:
- 11
- Issue:
- 26
- ISSN:
- 1614-6832
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
more » « less
Abstract -
more » « less
Abstract Titanium dioxide (TiO2) is a promising electrode material for reversible lithium storage. However, the poor electronic conductivity, sluggish diffusivity, and intrinsic kinetics limit hinder its fast lithium storage capability. Here we present that the oxygen‐deficient TiO2hierarchical spheres can address the issues for high capacity, long‐term lithium‐ion battery anode. First‐principles calculations show that introducing oxygen vacancies to anatase TiO2can reduce the bandgap, thus improving the electronic conductivity and further the lithium storage properties of TiO2. By annealing TiO2/H2Ti5O11⋅3H2O hierarchical spheres precursor in nitrogen, accompanying with the phase transfer process, the growth of TiO2crystallites is restricted due to the generation of residual carbon species, resulting in a well maintained hierarchical spherical structure. Rich oxygen vacancies are generated in the oxygen‐deficient environment and evidenced by EPR, XPS, and UV‐Vis spectra, which enable the TiO2hierarchical spheres reduced bandgap. The oxygen vacancies in the as‐obtained TiO2hierarchical spheres together with the high structural integrity of the hierarchical spheres gives rise to superior lithium storage properties including a high specific capacity of 282 mAh g−1at 200 mA g−1, and long‐term cycling stability with a capacity retention of 85.2 % at 4 A g−1over 10000 cycles.
-
more » « less
Abstract Macroporous Nb2O5(MP‐Nb2O5) has been synthesized using dispersed polystyrene microspheres (PS) as template followed by annealing in air. The structural characterization showed that the diameters of the macropores are around 200 nm and the average particle size of the composition is 20–50 nm. XPS revealed the presence of low valence Nb4+and oxygen vacancies on the surface of the resulting product introduced during the pyrolysis of PS. Such a unique combination of macroporous nanostructure and tetravalent niobium ions enables the electrode with superior lithium ion insertion properties, such as high specific capacity (≈190 mA h g−1at 0.5C) and rate capability. Even at a current density of 1.6 A g−1, an average capacity of 129.2 mA h g−1can still be obtained. These findings demonstrate MP‐Nb2O5is a promising candidate for high‐rate lithium ion storage applications.
-
more » « less
Ever-increasing demands for energy, particularly being environmentally friendly have promoted the transition from fossil fuels to renewable energy.1Lithium-ion batteries (LIBs), arguably the most well-studied energy storage system, have dominated the energy market since their advent in the 1990s.2However, challenging issues regarding safety, supply of lithium, and high price of lithium resources limit the further advancement of LIBs for large-scale energy storage applications.3Therefore, attention is being concentrated on an alternative electrochemical energy storage device that features high safety, low cost, and long cycle life. Rechargeable aqueous zinc-ion batteries (ZIBs) is considered one of the most promising alternative energy storage systems due to the high theoretical energy and power densities where the multiple electrons (Zn2+) . In addition, aqueous ZIBs are safer due to non-flammable electrolyte (e.g., typically aqueous solution) and can be manufactured since they can be assembled in ambient air conditions.4As an essential component in aqueous Zn-based batteries, the Zn metal anode generally suffers from the growth of dendrites, which would affect battery performance in several ways. Second, the led by the loose structure of Zn dendrite may reduce the coulombic efficiency and shorten the battery lifespan.5
Several approaches were suggested to improve the electrochemical stability of ZIBs, such as implementing an interfacial buffer layer that separates the active Zn from the bulk electrolyte.6However, the and thick thickness of the conventional Zn metal foils remain a critical challenge in this field, which may diminish the energy density of the battery drastically. According to a theretical calculation, the thickness of a Zn metal anode with an areal capacity of 1 mAh cm-2is about 1.7 μm. However, existing extrusion-based fabrication technologies are not capable of downscaling the thickness Zn metal foils below 20 μm.
Herein, we demonstrate a thickness controllable coating approach to fabricate an ultrathin Zn metal anode as well as a thin dielectric oxide separator. First, a 1.7 μm Zn layer was uniformly thermally evaporated onto a Cu foil. Then, Al2O3, the separator was deposited through sputtering on the Zn layer to a thickness of 10 nm. The inert and high hardness Al2O3layer is expected to lower the polarization and restrain the growth of Zn dendrites. Atomic force microscopy was employed to evaluate the roughness of the surface of the deposited Zn and Al2O3/Zn anode structures. Long-term cycling stability was gauged under the symmetrical cells at 0.5 mA cm-2for 1 mAh cm-2. Then the fabricated Zn anode was paired with MnO2as a full cell for further electrochemical performance testing. To investigate the evolution of the interface between the Zn anode and the electrolyte, a home-developed in-situ optical observation battery cage was employed to record and compare the process of Zn deposition on the anodes of the Al2O3/Zn (demonstrated in this study) and the procured thick Zn anode. The surface morphology of the two Zn anodes after circulation was characterized and compared through scanning electron microscopy. The tunable ultrathin Zn metal anode with enhanced anode stability provides a pathway for future high-energy-density Zn-ion batteries.
Obama, B., The irreversible momentum of clean energy.
Science 2017, 355 (6321), 126-129.Goodenough, J. B.; Park, K. S., The Li-ion rechargeable battery: a perspective.
J Am Chem Soc 2013, 135 (4), 1167-76.Li, C.; Xie, X.; Liang, S.; Zhou, J., Issues and Future Perspective on Zinc Metal Anode for Rechargeable Aqueous Zinc‐ion Batteries.
Energy & Environmental Materials 2020, 3 (2), 146-159.Jia, H.; Wang, Z.; Tawiah, B.; Wang, Y.; Chan, C.-Y.; Fei, B.; Pan, F., Recent advances in zinc anodes for high-performance aqueous Zn-ion batteries.
Nano Energy 2020, 70 .Yang, J.; Yin, B.; Sun, Y.; Pan, H.; Sun, W.; Jia, B.; Zhang, S.; Ma, T., Zinc Anode for Mild Aqueous Zinc-Ion Batteries: Challenges, Strategies, and Perspectives.
Nanomicro Lett 2022, 14 (1), 42.Yang, Q.; Li, Q.; Liu, Z.; Wang, D.; Guo, Y.; Li, X.; Tang, Y.; Li, H.; Dong, B.; Zhi, C., Dendrites in Zn-Based Batteries.
Adv Mater 2020, 32 (48), e2001854.Acknowledgment
This work was partially supported by the U.S. National Science Foundation (NSF) Award No. ECCS-1931088. S.L. and H.W.S. acknowledge the support from the Improvement of Measurement Standards and Technology for Mechanical Metrology (Grant No. 22011044) by KRISS.
Figure 1
-
more » « less
Abstract Vanadium multiredox‐based NASICON‐Na
z V2−y My (PO4)3(3 ≤z ≤ 4; M = Al3+, Cr3+, and Mn2+) cathodes are particularly attractive for Na‐ion battery applications due to their high Na insertion voltage (>3.5 V vs Na+/Na0), reversible storage capacity (≈150 mA h g−1), and rate performance. However, their practical application is hindered by rapid capacity fade due to bulk structural rearrangements at high potentials involving complex redox and local structural changes. To decouple these factors, a series of Mg2+‐substituted Na3+y V2−y Mgy (PO4)3(0 ≤y ≤ 1) cathodes is studied for which the only redox‐active species is vanadium. While X‐ray diffraction (XRD) confirms the formation of solid solutions between they = 0 and 1 end members, X‐ray absorption spectroscopy and solid‐state nuclear magnetic resonance reveal a complex evolution of the local structure upon progressive Mg2+substitution for V3+. Concurrently, the intercalation voltage rises from 3.35 to 3.45 V, due to increasingly more ionic VO bonds, and the sodium (de)intercalation mechanism transitions from a two‐phase fory ≤ 0.5 to a solid solution process fory ≥ 0.5, as confirmed by in operando XRD, while Na‐ion diffusion kinetics follow a nonlinear trend across the compositional series.
