skip to main content

This content will become publicly available on June 1, 2024

Title: Optimizing Truss Structures Using Composite Materials under Natural Frequency Constraints with a New Hybrid Algorithm Based on Cuckoo Search and Stochastic Paint Optimizer (CSSPO)
This article highlights the absence of published paradigms hybridized by The Cuckoo Search (CS) and Stochastic Paint Optimizer (SPO) for optimizing truss structures using composite materials under natural frequency constraints. The article proposes a novel optimization algorithm called CSSPO for optimizing truss structures made of composite materials, known as fiber-reinforced polymer (FRP) composites, to address this gap. Optimization problems of truss structures under frequency constraints are recognized as challenging due to their non-linear and non-convex search spaces that contain numerous local optima. The proposed methodology produces high-quality optimal solutions with less computational effort than the original methods. The aim of this work is to compare the performance of carbon FRP (CFRP), glass FRP (GFRP), and steel using a novel hybrid algorithm to provide valuable insights and inform decision-making processes in material selection and design. Four benchmark structure trusses with natural frequency constraints were utilized to demonstrate the efficiency and robustness of the CSSPO. The numerical analysis findings indicate that the CSSPO outperforms the classical SPO and exhibits comparable or superior performance when compared to the SPO. The study highlights that implementing CFRP and GFRP composites in truss construction leads to a notable reduction in weight compared to using steel.  more » « less
Award ID(s):
Author(s) / Creator(s):
; ; ;
Date Published:
Journal Name:
Page Range / eLocation ID:
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. null (Ed.)
    As part of the effort to improve the seismic performance of buildings in Alaska (AK), many of the deficient structures in Anchorage, AK, were retrofitted—some with externally bonded fiber-reinforced polymer (EBFRP) composite systems. The 2018 magnitude 7.1 Cook Inlet earthquake that impacted the same region offered an opportunity to evaluate the performance of EBFRP retrofits in a relatively high-intensity earthquake. This study summarizes the following findings of this field investigation: (1) the performance of EBFRP-retrofitted structures in the Cook Inlet earthquake and (2) the observations concerning the condition of FRP retrofits from over a decade of exposure in a subarctic environment. A deployment team from the National Institute of Standards and Technology (NIST) in collaboration with the University of Delaware (UD) Center for Composite Materials conducted post-earthquake inspections of EBFRP retrofits in multiple buildings to assess their performance during the earthquake and condition with respect to weathering. EBFRP debonding was documented with infrared thermography and acoustic sounding and the bond quality between EBFRP and concrete was assessed using pull-off tests. Visual inspections showed no major signs of earthquake damage in the EBFRP-retrofitted components. However, evaluation of debonding and pull-off test results suggested that outdoor conditions may have led to bond deterioration between EBFRP and concrete from installation defects that grew over time, freeze–thaw expansion from moisture present at the FRP/concrete interface, differences in thermal expansion of the materials, or a combination thereof. The carbon fiber–reinforced polymer (CFRP) bond to concrete was found to be more vulnerable to outdoor exposure than the glass fiber–reinforced polymer (GFRP) bond. Earthquake effects on FRP/concrete bond could not be assessed due to the lack of baseline data. 
    more » « less
  2. This study assesses physical and chemical properties of fiber reinforced polymer (FRP) composite materials aged in Alaska’s subarctic climate. Carbon FRP (CFRP) and glass FRP (GFRP) samples were collected in 2019 from the exterior and interior of Ted Stevens International Airport (TSIA, retrofitted in 2008) and McKinley Tower (MKT, retrofitted in 2004). Differential scanning calorimetry (DSC) was used to measure glass transition temperature (Tg) and physical aging, FTIR and Raman spectroscopy were used to investigate potential chemical degradation and degree of cure, and scanning electron microscopy (SEM) to evaluate cross-sectional microstructure, respectively. The results indicate that exposure to the subarctic climate had minimal effect on the composites’ and chemical properties. The variability in fiber content at MKT and thermal properties at TSIA suggest there were likely some inconsistencies in the FRP installation that may affect load-carrying capacity. Furthermore, some microcracks were observed in the FRP retrofits which may have resulted from a combination of poor fiber impregnation and thermal cycling. 
    more » « less
  3. Fiber reinforced polymer (FRP) waste is becoming an environmental concern due to the widespread use and non-biodegradable nature of FRP composites. Cutting FRP waste into discrete reinforce-ments (referred to as “needles” hereafter) as coarse aggregate in concrete has been suggested as a possible solution to FRP waste recycling. It has previously been observed in small specimens that FRP needles increase the tensile strength and energy absorption capacity of concrete. This paper presents an experimental investiga-tion into the effect of GFRP needles as coarse aggregate partial replacement in concrete on shear behavior of full-scale reinforced concrete (RC) beams. A total of 10 RC beams without steel stirrups in the critical zone were tested under four-point bending. The volume replacement ratio of the coarse aggregate and the surface type of GFRP needles were chosen as the test parameters. GFRP needles, with either smooth or helically wrapped surfaces, were added to the concrete mix to replace 5% or 10% of coarse aggregate by volume, respectively. All test beams failed in shear in a brittle manner with the ductility being slightly enhanced by the partial replace-ment of coarse aggregate using GFRP needles. An enhancement of 8%-10% in the load carrying capacity was observed in beams with helically wrapped needles, while beams with smooth needles showed a reduction in the load carrying capacity. 
    more » « less
  4. Carbon fiber reinforced polymer (CFRP) composites have been increasingly used in many vehicles such as airplanes, automobiles, and ships due to the advantages of high-strength, high-modulus, lightweight, and corrosion resistance. CFRP structures enhance the vehicle's performance, energy-efficiency, comfort, and safety. However, a common safety concern is how the CFRP materials perform when the vehicle is in fire and if there are enough time to safely evacuate the passengers. The elevated temperature can soften and decompose the polymer matrix, delaminate the CFRP laminate, and burn the CFRP through the contact with oxygen. As a result, the thermal and flammability response of CFRP is important for considering CFRP for vehicle applications; and some specialty high-temperature or flame/smoke/toxicity-proven resins have been investigated for CFRP parts manufacturing due to the needs. In this paper, a novel flame resistant hypothesis of utilizing the unique nano/micro- interlocked fiber reinforcing structure of the long-range carbon nanofiber z-threaded CFRP (ZT-CFRP) composite laminates for improving the flammability performance will be investigated. The carbon nanofibers (CNT) and carbon nanotubes (CNT), which have excellent thermal and mechanical properties, will be dispersed in an epoxy resin and will zig-zag thread through a carbon fiber fabric using an electrical/flow assisted impregnation process to create the unidirectional ZT-CFRP prepregs, respectively, which will be further processed into ZT-CFRP composite laminates. The UL-94 flammability test will be employed to characterize the ZT-CFRP laminates' flammability performance against the control baseline data of the regular CFRP, all without using any flame retardant chemicals. An impressive self-extinguishing flammability characteristic of the CNF based ZT-CFRP samples has been distinctly identified from all the samples. The UL-94 testing results and the effectiveness of using the long-range nanofiber z-threading strategy for enabling the novel nano/microstructure-induced flame resistant and self-extinguishing characteristics will be discussed. 
    more » « less
  5. null (Ed.)
    Abstract The composite sandwich structures with foam core and fiber-reinforced polymer skin are prone to damage under local impact. The mechanical behavior of sandwich panels (glass fiber-reinforced polymer [GFRP] skin reinforced with lattice webs and syntactic foams core) is studied under crushing load. The crushing behavior, failure modes, and energy absorption are correlated with the number of GFRP layers in facesheets and webs, fiber volume fractions of facesheets in both longitudinal and transverse directions, and density and thickness of syntactic foam. The test results revealed that increasing the number of FRP layers of lattice webs was an effective way to enhance the energy absorption of sandwich panels without remarkable increase in the peak load. Moreover, a three-dimensional finite-element (FE) model was developed to simulate the mechanical behavior of the syntactic foam sandwich panels, and the numerical results were compared with the experimental results. Then, the verified FE model was applied to conduct extensive parametric studies. Finally, based on experimental and numerical results, the optimal design of syntactic foam sandwich structures as energy absorption members was obtained. This study provides theoretical basis and design reference of a novel syntactic foam sandwich structure for applications in bridge decks, ship decks, carriages, airframes, wall panels, anticollision guard rails and bumpers, and railway sleepers. 
    more » « less