An official website of the United States government
The synthesis of alkylphosphine-substituted α-diimine (DI) ligands and their subsequent addition to Ni(COD) 2 allowed for the preparation of ( iPr2PPr DI)Ni and ( tBu2PPr DI)Ni . The solid state structures of both compounds were found to feature a distorted tetrahedral geometry that is largely consistent with the reported structure of the diphenylphosphine-substituted variant, ( Ph2PPr DI)Ni . To explore and optimize the synthetic utility of this catalyst class, all three compounds were screened for benzaldehyde hydrosilylation activity at 1.0 mol% loading over 3 h at 25 °C. Notably, ( Ph2PPr DI)Ni was found to be the most efficient catalyst while phenyl silane was the most effective reductant. A broad scope of aldehydes and ketones were then hydrosilylated, and the silyl ether products were hydrolyzed to afford alcohols in good yield. When attempts were made to explore ester reduction, inefficient dihydrosilylation was noted for ethyl acetate and no reaction was observed for several additional substrates. However, when an equimolar solution of allyl acetate and phenyl silane was added to 1.0 mol% ( Ph2PPr DI)Ni , complete ester C–O bond hydrosilylation was observed within 30 min at 25 °C to generate propylene and PhSi(OAc) 3 . The scope of this reaction was expanded to include six additional allyl esters, and under neat conditions, turnover frequencies of up to 990 h −1 were achieved. This activity is believed to be the highest reported for transition metal-catalyzed ester C–O bond hydrosilylation. Proposed mechanisms for ( Ph2PPr DI)Ni -mediated carbonyl and allyl ester C–O bond hydrosilylation are also discussed.
more »
« less
Chain‐growth polycondensation via the substituent effect: Investigation of the monomer structure on synthesis of poly(N‐octyl‐benzamide)
Abstract A systematic study of the behavior of different leaving groups on a variety of ester‐based monomers was performed for the chain‐growth polycondensation synthesis of poly(N‐octyl benzamide). Linear and branched alkane esters were compared with their phenyl analogs using both computational and experimental methods. Kinetic experiments along with qualitative solubility observations were used, with the aid of nuclear magnetic resonance spectroscopy and gel‐permeation chromatography, to determine progress of the reaction, molecular weights, and molecular weight distributions. It was found that the reactivity of the monomer's ester group depends more on the stability of the leaving alkoxide than the electrophilicity of the carbonyl carbon, which contradicts previous literature. The order of reactivity increases for the alkyl esters with decreasing steric hindrance and decreasing pKa of the substituent. For the phenyl ester derivatives, the more electron withdrawing character of a para substituent increases the reactivity of the ester group, due to the higher resonance stabilization of the leaving phenoxide anion, not due to an increase in the electrophilicity of the carbonyl carbon.
more »
« less
- Award ID(s):
- 2024448
- PAR ID:
- 10453520
- Publisher / Repository:
- Wiley Blackwell (John Wiley & Sons)
- Date Published:
- Journal Name:
- Journal of Polymer Science
- Volume:
- 58
- Issue:
- 17
- ISSN:
- 2642-4150
- Page Range / eLocation ID:
- p. 2389-2406
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
An electrochemical coupling between carboxylic acids and penta uorophenol (PFP–OH) to access synthetically versatile penta uorophenyl (PFP) esters has been developed. Novel reactivity of PFP–OH was turned on by modulating its oxidation state, leveraging both its native O-nucleophilicity and its latent, oxidation-induced C-electrophilicity to promote a unique cascade of nucleophilic aromatic and acyl substitutions. Its esteri cation with acids was thus achieved for the rst time without exogenous dehydrating agents. The acidity of PFP–OH and the oxidizability of its conjugate base enabled its mild and selective activation via deprotonation–oxidation, readily affording PFP esters that are useful in many applications (peptide synthesis, chemical biology, etc.) and that contain redox-sensitive functional groups. Finally, we verified in a unified forum that an amino-acid-derived PFP ester can be converted into a range of acyl-substitution products while retaining key stereochemical information, and we demonstrated that PFP esters have excellent stability to hydrolysis, comparing favorably even to N-hydroxysuccinimidyl (NHS) esters.more » « less
-
In the title compound, C10H12N2O4, the four substituents lie out of the phenyl plane by varying degrees. The methyl C atom lies 0.019 (3) A ˚ out of plane, while the methoxy O and C atoms lie 0.067 (2) and 0.042 (3) A ˚ out of plane, respectively, with the C—C—O—C torsion angle being 3.3 (2). The plane of the nitro group is twisted out of the phenyl plane, forming a dihedral angle of 12.03 (9) with it. The acetamide substituent is twisted considerably more out of the phenyl plane, forming a dihedral angle of 47.24 (6) with it. In the extended structure, the acetamide NH group donates a hydrogen bond to an acetamide carbonyl O atom, thereby forming chains propagating in the [010] direction.more » « less
-
Fast pyrolysis of pine wood was carried out to yield a liquid bio-oil mixture that was separated into organic and aqueous phases. The organic phase (ORG-bio-oil) was characterized by gas chromatography–mass spectroscopy, 31 P-nuclear magnetic resonance spectroscopy, and Fourier transform infrared (FTIR) spectroscopy. It was further used as a raw material for producing a mixture of biphenolic compounds (ORG-biphenol). ORG-bio-oil, ORG-biphenol, and bisphenol-A were reacted with cyanogen bromide to yield cyanate ester monomers. Cyanate esters were characterized using FTIR spectroscopy and were thermally cross-linked to develop thermoset materials. Thermomechanical properties of cross-linked cyanate esters were assessed using dynamic mechanical analysis and compared with those of cross-linked bisphenol-A-based cyanate ester. ORG-biphenol cyanate ester was observed to have a superior glass transition temperature (350–380°C) as compared to bisphenol-A cyanate ester (190–220°C). Cyanate esters derived from bio-oil have the potential to be a sustainable alternative to the bisphenol-A-derived analog.more » « less
-
High-density polyethylene (HDPE) is a widely used commercial plastic due to its excellent mechanical properties, chemical resistance, and water vapor barrier properties. However, less than 10% of HDPE is mechanically recycled, and the chemical recycling of HDPE is challenging due to the inherent strength of the carbon–carbon backbone bonds. Here, we report chemically recyclable linear and branched HDPE with sparse backbone ester groups synthesized from the transesterification of telechelic polyethylene macromonomers. Stoichiometrically self-balanced telechelic polyethylenes underwent transesterification polymerization to produce the PE-ester samples with high number-average molar masses of up to 111 kg/mol. Moreover, the transesterification polymerization of the telechelic polyethylenes and the multifunctional diethyl 5-(hydroxymethyl)isophthalate generated branched PE-esters. Thermal and mechanical properties of the PE-esters were comparable to those of commercial HDPE and tunable through control of the ester content in the backbone. In addition, branched PE-esters showed higher levels of melt strain hardening compared with linear versions. The PE-ester was depolymerized into telechelic macromonomers through straightforward methanolysis, and the resulting macromonomers could be effectively repolymerized to generate a high molar mass recycled PE-ester sample. This is a new and promising method for synthesizing and recycling high-molar-mass linear and branched PE-esters, which are competitive with HDPE and have easily tailorable properties.more » « less
