An official website of the United States government
Understanding the nucleation and growth mechanisms of highentropy alloy (HEA) nanoparticles is crucial for developing functional nanocrystals with tailored properties. This study investigates the thermal decomposition of mixed metal salt precursors (Fe, Ni, Pt, Ir, Ru) on reduced graphene oxide (rGO) using in situ transmission electron microscopy (TEM) when heated to 1000 °C at both slow (20 °C min−1) and fast (103 °C s−1) heating/cooling rates. Slow heating to 1000 °C revealed the following: (1) The nanoparticles' nucleation occurred through multistage decomposition at lower temperatures (250−300 °C) than single metal salt precursors (300−450 °C). (2) Pt-dominant nanocrystals autocatalytically reduced other elements, leading to the formation of multimetallic FeNiPtIrRu nanoparticles. (3) At 1000 °C, the nanoparticles were single-phase with noble metals enriched compared to transition metals. (4) Slow cooling induced structural heterogeneity and phase segregation due to element diffusion and thermodynamic miscibility. (5) Adding polyvinylpyrrolidone (PVP) suppressed segregation, promoting HEA nanoparticle formation even during slow cooling by limiting atomic diffusion. Under fast heating/cooling, nanoparticles formed as a solid solution of fcc HEA, indicating kinetic control and limited atomic diffusion. The density function theory (DFT) calculations illustrate that the simultaneous presence of metal elements on rGO, as expected by the fast heating process, favors the formation of an fcc HEA structure, with strong interactions between HEA nanoparticles and rGO enhancing stability. This study provides insights into how heating rates and additives like PVP can control phase composition, chemical homogeneity, and stability, enabling the rational design of complex nanomaterials for catalytic, energy, and functional applications.
more »
« less
Continuous Synthesis of Hollow High‐Entropy Nanoparticles for Energy and Catalysis Applications
Abstract Mixing multimetallic elements in hollow‐structured nanoparticles is a promising strategy for the synthesis of highly efficient and cost‐effective catalysts. However, the synthesis of multimetallic hollow nanoparticles is limited to two or three elements due to the difficulties in morphology control under the harsh alloying conditions. Herein, the rapid and continuous synthesis of hollow high‐entropy‐alloy (HEA) nanoparticles using a continuous “droplet‐to‐particle” method is reported. The formation of these hollow HEA nanoparticles is enabled through the decomposition of a gas‐blowing agent in which a large amount of gas is produced in situ to “puff” the droplet during heating, followed by decomposition of the metal salt precursors and nucleation/growth of multimetallic particles. The high active sites per mass ratio of such hollow HEA nanoparticles makes them promising candidates for energy and electrocatalysis applications. As a proof‐of‐concept, it is demonstrated that these materials can be applied as the cathode catalyst for Li–O2battery operations with a record‐high current density per catalyst mass loading of 2000 mA gcat.−1, as well as good stability and durable catalytic activity. This work offers a viable strategy for the continuous manufacturing of hollow HEA nanomaterials that can find broad applications in energy and catalysis.
more »
« less
- PAR ID:
- 10455621
- Publisher / Repository:
- Wiley Blackwell (John Wiley & Sons)
- Date Published:
- Journal Name:
- Advanced Materials
- Volume:
- 32
- Issue:
- 46
- ISSN:
- 0935-9648
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
High-entropy alloys (HEAs) are a class of metal alloys consisting of four or more molar equal or near-equal elements. HEA nanomaterials have garnered significant interest due to their wide range of applications, such as electrocatalysis, welding, and brazing. Their unique multi-principle high-entropy effect allows for the tailoring of the alloy composition to facilitate specific electrochemical reactions. This study focuses on the synthesis of high-purity HEA nanoparticles using the method of femtosecond laser ablation synthesis in liquid. The use of ultrashort energy pulses in femtosecond lasers enables uniform ablation of materials at significantly lower power levels compared to longer pulse or continuous pulse lasers. We investigate how various femtosecond laser parameters affect the morphology, phase, and other characteristics of the synthesized nanoparticles. An innovative aspect of our solution is its ability to rapidly generate multi-component nanoparticles with a high fidelity as the input multi-component target material at a significant yielding rate. Our research thus focuses on a novel synthesis of high-entropy alloying CuCoMn1.75NiFe0.25 nanoparticles. We explore the characterization and unique properties of the nanoparticles and consider their electrocatalytic applications, including high power density aluminum air batteries, as well as their efficacy in the oxygen reduction reaction (ORR). Additionally, we report a unique nanowire fabrication phenomenon achieved through nanojoining. The findings from this study shed light on the potential of femtosecond laser ablation synthesis in liquid (FLASiL) as a promising technique for producing high-purity HEA nanoparticles.more » « less
-
High entropy alloy (HEA) nanoparticles hold promise as active and durable (electro)catalysts. Understanding their formation mechanism will enable rational control over composition and atomic arrangement of multimetallic catalytic surface sites to maximize their activity. While prior reports have attributed HEA nanoparticle formation to nucleation and growth, there is a dearth of detailed mechanistic investigations. Here we utilize liquid phase transmission electron microscopy (LPTEM), systematic synthesis, and mass spectrometry (MS) to demonstrate that HEA nanoparticles form by aggregation of metal cluster intermediates. AuAgCuPtPd HEA nanoparticles are synthesized by aqueous co-reduction of metal salts with sodium borohydride in the presence of thiolated polymer ligands. Varying the metal : ligand ratio during synthesis showed that alloyed HEA nanoparticles formed only above a threshold ligand concentration. Interestingly, stable single metal atoms and sub-nanometer clusters are observed by TEM and MS in the final HEA nanoparticle solution, suggesting nucleation and growth is not the dominant mechanism. Increasing supersaturation ratio increased particle size, which together with observations of stable single metal atoms and clusters, supported an aggregative growth mechanism. Direct real-time observation with LPTEM imaging showed aggregation of HEA nanoparticles during synthesis. Quantitative analyses of the nanoparticle growth kinetics and particle size distribution from LPTEM movies were consistent with a theoretical model for aggregative growth. Taken together, these results are consistent with a reaction mechanism involving rapid reduction of metal ions into sub-nanometer clusters followed by cluster aggregation driven by borohydride ion induced thiol ligand desorption. This work demonstrates the importance of cluster species as potential synthetic handles for rational control over HEA nanoparticle atomic structure.more » « less
-
Abstract Mono‐ and multimetallic nanoparticles (NPs) have diverse and tunable physicochemical properties that arise from their compositions as well as crystallite size and shape. The ability to control precisely the composition and structure of NPs through synthesis is central to achieving state‐of‐the‐art designer metal NPs for use as catalysts and electrocatalysts. However, a major limitation to the use of designer metal NPs as catalysts is the ability to scale their syntheses while maintaining structural precision. To address this challenge, continuous flow routes to metal NPs involving the use of droplet microreactors are being developed, providing the synthetic versatility necessary to achieve known and completely new nanostructures. This progress report outlines how the chemistry and process parameters of droplet microreactors can be used to achieve high performing nanocatalysts through control of NP composition, size, shape, and architecture and outlines directions toward previously unimaginable nanostructures.more » « less
-
The fast and efficient synthesis of nanoparticles on flexible and lightweight substrates is increasingly critical for various medical and wearable applications. However, conventional high temperature (high-T) processes for nanoparticle synthesis are intrinsically incompatible with temperature-sensitive substrates, including textiles and paper ( i.e. low-T substrates). In this work, we report a non-contact, ‘fly-through’ method to synthesize nanoparticles on low-T substrates by rapid radiative heating under short timescales. As a demonstration, textile substrates loaded with platinum (Pt) salt precursor are rapidly heated and quenched as they move across a 2000 K heating source at a continuous production speed of 0.5 cm s −1 . The rapid radiative heating method induces the thermal decomposition of various precursor salts and nanoparticle formation, while the short duration ensures negligible change to the respective low-T substrate along with greatly improved production efficiency. The reported method can be generally applied to the synthesis of metal nanoparticles ( e.g. gold and ruthenium) on various low-T substrates ( e.g. paper). The non-contact and continuous ‘fly-through’ synthesis offers a robust and efficient way to synthesize supported nanoparticles on flexible and lightweight substrates. It is also promising for ultrafast and roll-to-roll manufacturing to enable viable applications.more » « less
