An official website of the United States government
Abstract Despite decades of studies, the nature of the glass transition remains elusive. In particular, the sharpness of the dynamical arrest of a melt at the glass transition is captured by its fragility. Here, we reveal that fragility is governed by the medium-range order structure. Based on neutron-diffraction data for a series of aluminosilicate glasses, we propose a measurable structural parameter that features a strong inverse correlation with fragility, namely, the average medium-range distance (MRD). We use in-situ high-temperature neutron-scattering data to discuss the physical origin of this correlation. We argue that glasses exhibiting lowMRDvalues present an excess of small network rings. Such rings are unstable and deform more readily with changes in temperature, which tends to increase fragility. These results reveal that the sharpness of the dynamical arrest experienced by a silicate glass at the glass transition is surprisingly encoded into the stability of rings in its network.
more »
« less
Topological model of alkali germanate glasses and exploration of the germanate anomaly
Abstract Germanate glasses are of particular interest for their excellent optical properties as well as their abnormal structural changes that appear with the addition of modifiers, giving rise to the so‐calledgermanate anomaly. This anomaly refers to the nonmonotonic compositional scaling of properties exhibited by alkali germanate glasses and has been studied with various spectroscopy techniques. However, it has been difficult to understand its atomic scale origin, especially since the germanium nucleus is not easily observed by nuclear magnetic resonance. To gain insights into the mechanisms of the germanate anomaly, we have constructed a structural model using statistical mechanics and topological constraint theory to provide an accurate prediction of alkali germanate glass properties. The temperature onsets for the rigid bond constraints are deduced from in situ Brillouin light scattering, and the number of constraints is shown to be accurately calculable using statistical methods. The alkali germanate model accurately captures the effect of the germanate anomaly on glass transition temperature, liquid fragility, and Young's modulus. We also reveal that compositional variations in the glass transition temperature and Young's modulus are governed by the O–Ge–O angular constraints, whereas the variations in fragility are governed by the Ge–O radial constraints.
more »
« less
- Award ID(s):
- 1746230
- PAR ID:
- 10456453
- Publisher / Repository:
- Wiley-Blackwell
- Date Published:
- Journal Name:
- Journal of the American Ceramic Society
- Volume:
- 103
- Issue:
- 8
- ISSN:
- 0002-7820
- Page Range / eLocation ID:
- p. 4224-4233
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract The viscosity and its temperature dependence, the fragility, are key properties of a liquid. A low fragility is believed to promote the formation of metallic glasses. Yet, the fragility remains poorly understood, since experimental data of its compositional dependence are scarce. Here, we introduce the film inflation method (FIM), which measures the fragility of metallic glass forming liquids across wide ranges of composition and glass-forming ability. We determine the fragility for 170 alloys ranging over 25 at.% in Mg–Cu–Y. Within this alloy system, large fragility variations are observed. Contrary to the general understanding, a low fragility does not correlate with high glass-forming ability here. We introduce crystallization complexity as an additional contribution, which can potentially become significant when modeling glass forming ability over many orders of magnitude.more » « less
-
Principles of Topological Constraint Theory (TCT) were applied to alkali borate and silicate glass systems using intermediate range structural models over wide compositional ranges. The structural model for lithium borate was derived from the Feller, Dell, and Bray model [1] and extended to the terminal composition at R = 3 where R is the molar ratio of lithium oxide to borate. The sodium borate structural model was built using both NMR [2] and Raman [3] data, and also included carbonate retention in the glass [4]. This model was extended to R = 3 similarly to the lithium borate system. The silicate system models were created from 29Si NMR data [5] and also incorporated carbonate retention where necessary [6]. Constraint models considered the effect of intermediate range structures on the system, and also incorporated the effect of “loose” alkali which is not directly associated with a non-bridging oxygen. Constraint models of the alkali borate, silicate, and borosilicate systems were then used to predict properties such as glass transition temperature and fragility.more » « less
-
Abstract The preparation of 0.58 Li2S + 0.315 SiS2+ 0.105 LiPO3glass, and the impacts of polysulfide and P1Pdefect structure impurities on the glass transition temperature (Tg), crystallization temperature (Tc), working range (ΔT≡ Tc‐ Tg), fragility index, and the Raman spectra were evaluated using statistical analysis. In this study, 33 samples of this glass composition were synthesized through melt‐quenching. Thermal analysis was conducted to determine the glass transition temperature, crystallization temperature, working range, and fragility index through differential scanning calorimetry. The quantity of the impurities described above was determined through Raman spectroscopy peak analysis. Elemental sulfur was doped into a glass to quantify the wt% sulfur content in the glasses. Linear regression analysis was conducted to determine the impact of polysulfide impurities and P1Pdefect impurities on the thermal properties. Polysulfide impurities were found to decrease theTgat rate of nearly 12°C per 1 wt% increase in sulfur concentration. The sulfur concentration does not have a statistically significant impact on the other properties (α = 0.05). The P1Pdefect structure appears to decrease the resistance to crystallization of the glass by measurably decreasing the working range of the glasses, but further study is necessary to fully quantify and determine this.more » « less
-
The observation of reversibility windows (RWs) in binary GexS100−x, AsxS100−xand ternary GexAsxS100−2xglass systems permits constructing a global topological phase diagram in the GeAsS composition triangle. The RW denotes glass compositions for which the enthalpy of relaxation atTgvanishes, leading to thermally reversing glass transitions. The phase diagram permits delineating glass compositions that are in the flexible phase (FP), intermediate phase (IP), and the stressed rigid phase (SRP) for all ternary GexAsxS100−2xglass compositions. For the IP compositions examined, a general lowering of the molar volumes,Vm, is observed in relation to those for non‐IP compositions, giving rise to a volumetric window. Melt dynamics of IP compositions reveal a fragility index,m < 20, lower than that for non‐IP melts for whichm > 20 displays a fragility window, underscoring in part the reason for the delayed homogenization of melts in these sulfide glasses. The observations of the three types of window characteristics of IP compositions are feasible only when the homogeneous bulk glasses are synthesized, in which the variance ⟨Δx⟩ in As and Ge concentrations,x, across batch compositions is less than 0.01%. This is established by Fourier transform–Raman profiling of each batch of composition that is synthesized.more » « less
