An official website of the United States government
Abstract Piezoresponse force microscopy (PFM) is used for investigation of the electromechanical behavior of the head‐to‐head (H‐H) and tail‐to‐tail (T‐T) domain walls on the non‐polar surfaces of three uniaxial ferroelectric materials with different crystal structures: LiNbO3, Pb5Ge3O11, and ErMnO3. It is shown that, contrary to the common expectation that the domain walls should not exhibit any PFM response on the non‐polar surface, an out‐of‐plane deformation of the crystal at the H‐H and T‐T domain walls occurs even in the absence of the out‐of‐plane polarization component due to a specific form of the piezoelectric tensor. In spite of their different symmetry, in all studied materials, the dominant contribution comes from the counteracting shear strains on both sides of the H‐H and T‐T domain walls. The finite element analysis approach that takes into account a contribution of all elements in the piezoelectric tensor, is applicable to any ferroelectric material and can be instrumental for getting a new insight into the coupling between the electromechanical and electronic properties of the charged ferroelectric domain walls.
more »
« less
Observation of Unconventional Dynamics of Domain Walls in Uniaxial Ferroelectric Lead Germanate
Abstract Application of scanning probe microscopy techniques such as piezoresponse force microscopy (PFM) opens the possibility to re‐visit the ferroelectrics previously studied by the macroscopic electrical testing methods and establish a link between their local nanoscale characteristics and integral response. The nanoscale PFM studies and phase field modeling of the static and dynamic behavior of the domain structure in the well‐known ferroelectric material lead germanate, Pb5Ge3O11, are reported. Several unusual phenomena are revealed: 1) domain formation during the paraelectric‐to‐ferroelectric phase transition, which exhibits an atypical cooling rate dependence; 2) unexpected electrically induced formation of the oblate domains due to the preferential domain walls motion in the directions perpendicular to the polar axis, contrary to the typical domain growth behavior observed so far; 3) absence of the bound charges at the 180° head‐to‐head (H–H) and tail‐totail (T–T) domain walls, which typically exhibit a significant charge density in other ferroelectrics due to the polarization discontinuity. This strikingly different behavior is rationalized by the phase field modeling of the dynamics of uncharged H–H and T–T domain walls. The results provide a new insight into the emergent physics of the ferroelectric domain boundaries, revealing unusual properties not exhibited by conventional Ising‐type walls.
more »
« less
- PAR ID:
- 10457507
- Publisher / Repository:
- Wiley Blackwell (John Wiley & Sons)
- Date Published:
- Journal Name:
- Advanced Functional Materials
- Volume:
- 30
- Issue:
- 21
- ISSN:
- 1616-301X
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract One of the exceptional features of the van der Waals (vdW) ferroelectrics is the existence of stable polarization at a level of atomically thin monolayers. This ability to withstand a detrimental effect of the depolarization fields gives rise to complex domain configurations characterized, among others, by the presence of layered “antipolar” head‐to‐head (H‐H) or tail‐to‐tail (T‐T) dipole arrangements. In this study, tomographic piezoresponse force microscopy (TPFM) is employed to study the 3D polarization arrangement in vdW ferroelectricα‐In2Se3. Sequential removal of thin layers from the polar surface using the PFM tip reveals a complex 3D profile of the domain walls in theα‐In2Se3crystals. Antiparallel domain layers stacked along the polar direction are also observed by PFM imaging of the non‐polar surfaces showing that H‐H and T‐T domain boundaries are commonly present inα‐In2Se3. Application of TPFM to the electrically written domains allows evaluation of their geometrical lateral‐to‐vertical size aspect ratio, which shows a strong prevalence for the sidewise expansion in comparison to the forward growth. LocalI–Vmeasurements reveal a strong polarization direction dependence of conductivity due to the modulation of the energy barrier height as corroborated by theoretical modeling.more » « less
-
Abstract Domain wall nanoelectronics is a rapidly evolving field, which explores the diverse electronic properties of the ferroelectric domain walls for application in low‐dimensional electronic systems. One of the most prominent features of the ferroelectric domain walls is their electrical conductivity. Here, using a combination of scanning probe and scanning transmission electron microscopy, the mechanism of the tunable conducting behavior of the domain walls in the sub‐micrometer thick films of the technologically important ferroelectric LiNbO3is explored. It is found that the electric bias generates stable domains with strongly inclined domain boundaries with the inclination angle reaching 20° with respect to the polar axis. The head‐to‐head domain boundaries exhibit high conductance, which can be modulated by application of the sub‐coercive voltage. Electron microscopy visualization of the electrically written domains and piezoresponse force microscopy imaging of the very same domains reveals that the gradual and reversible transition between the conducting and insulating states of the domain walls results from the electrically induced wall bending near the sample surface. The observed modulation of the wall conductance is corroborated by the phase‐field modeling. The results open a possibility for exploiting the conducting domain walls as the electrically controllable functional elements in the multilevel logic nanoelectronics devices.more » « less
-
Abstract Ferroelectric domain walls, topological entities separating domains of uniform polarization, are promising candidates as active elements for nanoscale memories. In such applications, controlled nucleation and stabilization of domain walls are critical. Here, using in situ transmission electron microscopy and phase‐field simulations, a controlled nucleation of vertically oriented 109° domain walls in (110)‐oriented BiFeO3(BFO) thin films is reported. In the switching experiment, reversed domains that are nucleated preferentially at the nanoscale edges of the “crest and sag” pattern‐like electrode under external bias subsequently grow into a stable stripe configuration. In addition, when triangular pockets (with an in‐plane polarization component) are present, these domain walls are pinned to form stable flux‐closure domains. Phase field simulations show that i) field enhancement at the edges of the electrode causes site‐specific domain nucleation, and ii) the local electrostatics at the domain walls drives the formation of flux closure domains, thus stabilizing the striped pattern, irrespective of the initial configuration. The results demonstrate how flux closure pinning can be exploited in conjunction with electrode patterning and substrate orientation to achieve a desired topological defect configuration. These insights constitute critical advancements in exploiting domain walls in next generation ferroelectronic devices.more » « less
-
Abstract Knowledge of the thermodynamic equilibria and domain structures of ferroelectrics is critical to establishing their structure–property relationships that underpin their applications from piezoelectric devices to nonlinear optics. Here, we establish the strain condition for strain phase separation and polydomain formation and analytically predict the corresponding domain volume fractions and wall orientations of, relatively low symmetry and theoretically more challenging, monoclinic ferroelectric thin films by integrating thermodynamics of ferroelectrics, strain phase equilibria theory, microelasticity, and phase‐field method. Using monoclinic KxNa1 − xNbO3(0.5 < x < 1.0) thin films as a model system, we establish the polydomain strain–strain phase diagrams, from which we identify two types of monoclinic polydomain structures. The analytically predicted strain conditions of formation, domain volume fractions, and domain wall orientations for the two polydomain structures are consistent with phase‐field simulations and in good agreement with experimental results in the literature. The present study demonstrates a general, powerful analytical theoretical framework to predict the strain phase equilibria and domain wall orientations of polydomain structures applicable to both high‐ and low‐symmetry ferroelectrics and provide fundamental insights into the equilibrium domain structures of ferroelectric KxNa1 − xNbO3thin films that are of technology relevance for lead‐free dielectric and piezoelectric applications.more » « less
