skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


  • NSF Public Access
  • Search Results
  • n‐Doping of a Low‐Electron‐Affinity Polymer Used as an Electron‐Transport Layer in Organic Light‐Emitting Diodes
Title: n‐Doping of a Low‐Electron‐Affinity Polymer Used as an Electron‐Transport Layer in Organic Light‐Emitting Diodes
Abstract n‐Doping electron‐transport layers (ETLs) increases their conductivity and improves electron injection into organic light‐emitting diodes (OLEDs). Because of the low electron affinity and large bandgaps of ETLs used in green and blue OLEDs, n‐doping has been notoriously more difficult for these materials. In this work, n‐doping of the polymer poly[(9,9‐dioctylfluorene‐2,7‐diyl)‐alt‐(benzo[2,1,3]thiadiazol‐4,7‐diyl)] (F8BT) is demonstrated via solution processing, using the air‐stable n‐dopant (pentamethylcyclopentadienyl)(1,3,5‐trimethylbenzene)ruthenium dimer [RuCp*Mes]2. Undoped and doped F8BT films are characterized using ultraviolet and inverse photoelectron spectroscopy. The ionization energy and electron affinity of the undoped F8BT are found to be 5.8 and 2.8 eV, respectively. Upon doping F8BT with [RuCp*Mes]2, the Fermi level shifts to within 0.25 eV of the F8BT lowest unoccupied molecular orbital, which is indicative of n‐doping. Conductivity measurements reveal a four orders of magnitude increase in the conductivity upon doping and irradiation with ultraviolet light. The [RuCp*Mes]2‐doped F8BT films are incorporated as an ETL into phosphorescent green OLEDs, and the luminance is improved by three orders of magnitude when compared to identical devices with an undoped F8BT ETL.  more » « less
Award ID(s):
1807797
PAR ID:
10457745
Author(s) / Creator(s):
 ;  ;  ;  ;  ;  ;  
Publisher / Repository:
Wiley Blackwell (John Wiley & Sons)
Date Published:
Journal Name:
Advanced Functional Materials
Volume:
30
Issue:
17
ISSN:
1616-301X
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; ; ; ; ; (, Journal of Materials Chemistry C)
    null (Ed.)
    Chemical doping is a key process for controlling the electronic properties of molecular semiconductors, including their conductivity and work function. A common limitation of n-doped polymers is their instability under ambient conditions, which has imposed restrictions on the characterisation and device application of n-doped polymers. In this study, sequential n-doping with organometallic dopants was performed on thin films of polymeric semiconductors with naphthalene diimide and perylene diimide-based backbones. Moderate ambient stability was achieved with (RuCp*Mes) 2 , {Cp* = pentamethylcyclopentadienyl; Mes = 1,3,5-trimethylbenzene}, which is in striking contrast to the unstable, n-doped state obtained with cobaltocene, a simple one-electron reductant. The highly cathodic, effective redox potential of (RuCp*Mes) 2 , ca. −2.0 V vs. ferrocene, suppresses the back electron transfer reaction and the subsequent dopant loss in air, which gives rise to the observed air stability. It also allows a perylene diimide-based polymer to be reduced to a state in which the repeat units are largely dianionic. Photoelectron measurements show that the ionization potential of the heavily doped polymer is ca. 3.9 eV. Our findings show that chemical doping with (RuCp*Mes) 2 is an effective method to produce highly stable, n-doped conjugated polymers. 
    more » « less
  2. ; ; ; ; ; ; (, Materials Advances)
    null (Ed.)
    The effects of sequential n-doping on a high-electron-mobility naphthalene-diimide-based copolymer poly[( N , N ′-bis(2-decyltetradecyl)-naphthalene-1,8:4,5-bis(dicarboximide)-2,6-diyl)-(selenophene-2,5-diyl)-(benzo[ c ][1,2,5]thiadiazole-4,7-diyl)-(selenophene-2,5-diyl)], PNBS, are reported. Grazing-incidence XRD measurements show that PNBS doped with 2,2′-bis(4-(dimethylamino)phenyl)-1,1′,3,3′-tetramethyl-2,2′,3,3′-tetrahydro-1 H ,1′ H -2,2′-bibenzo[ d ]imidazole, (N-DMBI) 2 , has increased order relative to both the pristine polymer and a film doped with ruthenium pentamethylcyclopentadienyl mesitylene dimer. Films of PNBS optimally doped with (N-DMBI) 2 show electrical conductivities approaching 2 mS cm −1 in air. Temperature-dependent electrical measurements suggest that the polaronic charge carriers are highly localized, which is consistent with the moderate conductivity values obtained. 
    more » « less
  3. ; ; ; ; ; ; ; ; ; ; et al (, Journal of Materials Chemistry C)
    null (Ed.)
    N-type semiconducting polymers have been recently utilized in thermoelectric devices, however they have typically exhibited low electrical conductivities and poor device stability, in contrast to p-type semiconductors, which have been much higher performing. This is due in particular to the n-type semiconductor's low doping efficiency, and poor charge carrier mobility. Strategies to enhance the thermoelectric performance of n-type materials include optimizing the electron affinity (EA) with respect to the dopant to improve the doping process and increasing the charge carrier mobility through enhanced molecular packing. Here, we report the design, synthesis and characterization of fused electron-deficient n-type copolymers incorporating the electron withdrawing lactone unit along the backbone. The polymers were synthesized using metal-free aldol condensation conditions to explore the effect of enlarging the central phenyl ring to a naphthalene ring, on the electrical conductivity. When n-doped with N-DMBI, electrical conductivities of up to 0.28 S cm −1 , Seebeck coefficients of −75 μV K −1 and maximum Power factors of 0.16 μW m −1 K −2 were observed from the polymer with the largest electron affinity of −4.68 eV. Extending the aromatic ring reduced the electron affinity, due to reducing the density of electron withdrawing groups and subsequently the electrical conductivity reduced by almost two orders of magnitude. 
    more » « less
  4. ; ; ; ; ; (, Materials Chemistry Frontiers)
    We present a series of new dopants based on a bicyclcic guanidine-type structure, 1,5,7-triazabicyclo[4.4.0]dec-5-ene ( TBD ), for organic semiconductors. A series of TBD derivatives that were alkylated at the 7-position were synthesized and their physical properties were determined. These stable dopants were shown to be effective n-type dopants for [6,6]-phenyl- C 61 -butyric acid methyl ester (PC 61 BM), poly{[ N , N ′-bis(2-octyldodecyl)naphthalene-1,4,5,8-bis(dicarboximide)-2,6-diyl]- alt -5,5′-(2,2′-bithiophene)} (P(NDI2OD-T2)) and 3,9-bis(2-methylene-(3-(1,1-dicyanomethylene)-indanone))-5,5,11,11-tetrakis(4-hexylphenyl)-dithieno[2,3- d :2′,3′- d ′]- s -indaceno[1,2- b :5,6- b ′]dithiophene (ITIC). Films of PC 61 BM doped with 10 mol% of a dimeric derivative of TBD had electrical conductivities of 0.065 S cm −1 . The utility of the dopants was further shown by doping electron transport layers of PC 61 BM with 2TBD-C10 for methyl ammonium lead iodide (MAPbI 3 ) solar cells leading to improved fill factors and PCEs relative to undoped ETLs. 
    more » « less
  5. ; ; ; ; ; ; ; ; ; ; et al (, Small)
    Abstract In2O3, an n‐type semiconducting transparent transition metal oxide, possesses a surface electron accumulation layer (SEAL) resulting from downward surface band bending due to the presence of ubiquitous oxygen vacancies. Upon annealing In2O3in ultrahigh vacuum or in the presence of oxygen, the SEAL can be enhanced or depleted, as governed by the resulting density of oxygen vacancies at the surface. In this work, an alternative route to tune the SEAL by adsorption of strong molecular electron donors (specifically here ruthenium pentamethylcyclopentadienyl mesitylene dimer, [RuCp*mes]2) and acceptors (here 2,2′‐(1,3,4,5,7,8‐hexafluoro‐2,6‐naphthalene‐diylidene)bis‐propanedinitrile, F6TCNNQ) is demonstrated. Starting from an electron‐depleted In2O3surface after annealing in oxygen, the deposition of [RuCp*mes]2restores the accumulation layer as a result of electron transfer from the donor molecules to In2O3, as evidenced by the observation of (partially) filled conduction sub‐bands near the Fermi level via angle‐resolved photoemission spectroscopy, indicating the formation of a 2D electron gas due to the SEAL. In contrast, when F6TCNNQ is deposited on a surface annealed without oxygen, the electron accumulation layer vanishes and an upward band bending is generated at the In2O3surface due to electron depletion by the acceptor molecules. Hence, further opportunities to expand the application of In2O3in electronic devices are revealed. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email