skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Attention:

The NSF Public Access Repository (PAR) system and access will be unavailable from 11:00 PM ET on Thursday, June 12 until 2:00 AM ET on Friday, June 13 due to maintenance. We apologize for the inconvenience.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


  • NSF Public Access
  • Search Results
  • Doping and Anisotropy–Dependent Electronic Transport in Chalcogenide Perovskite CaZrSe 3 for High Thermoelectric Efficiency
Title: Doping and Anisotropy–Dependent Electronic Transport in Chalcogenide Perovskite CaZrSe 3 for High Thermoelectric Efficiency
Abstract The potential of an environmentally friendly and emerging chalcogenide perovskite CaZrSe3for thermoelectric applications is examined. The orthorhombic phase of CaZrSe3has an optimum band gap (1.35–1.40 eV) for single‐junction photovoltaic applications. The predictions reveal that CaZrSe3possesses an absorption coefficient of ≈4 × 105cm−1at photon energies of 2.5 eV with an early onset of optical absorption (≈0.2 eV) well below the optimum band gap. Seebeck coefficient,S, is inversely proportional to the carrier mobility as the calculated average effective mass for electrons is higher than for holes;p‐type doping enhances the electrical conductivity, σ. The electronic thermal conductivityκeremains low at all temperatures. The upper limit of the thermoelectric figure of merit (ZTe) attains ≈1.0 when doped at specific chemical potentials, while a high Seebeck coefficient contributes to the ZTe = 1.95 at 50 K forp‐type doping with 1018cm−3carrier concentration, demonstrating high thermoelectric efficiency.  more » « less
Award ID(s):
1753770
PAR ID:
10460772
Author(s) / Creator(s):
 ;  ;  
Publisher / Repository:
Wiley Blackwell (John Wiley & Sons)
Date Published:
Journal Name:
Advanced Theory and Simulations
Volume:
2
Issue:
9
ISSN:
2513-0390
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; (, Journal of Materials Chemistry C)
    null (Ed.)
    Orthorhombic BaZrS 3 is a potential optoelectronic material with prospective applications in photovoltaic and thermoelectric devices. While efforts exist on understanding the effects of elemental substitution and material stability, fundamental knowledge on the electronic transport properties are sparse. We employ first principles calculations to examine the electronic band structure and optical band gap and interrogate the effect of electron transport on electrical and thermal conductivities, and Seebeck coefficient, as a function of temperature and chemical potential. Our results reveal that BaZrS 3 has a band gap of 1.79 eV in proximity of the optimal 1.35 eV recommended for single junction photovoltaics. An absorption coefficient of 3 × 10 5 cm −1 at photon energies of 3 eV is coupled with an early onset to optical absorption at 0.5 eV, significantly below the optical band gap. The carrier effective mass being lower for electrons than holes, we find the Seebeck coefficient to be higher for holes than electrons. A notable (≈1.0 at 300 K) upper limit to the thermoelectric figure of merit, obtained due to high Seebeck coefficient (3000 μV K −1 ) and ultra-low electron thermal conductivity, builds promise for BaZrS 3 as a thermoelectric. 
    more » « less
  2. ; ; ; ; ; ; (, Zeitschrift für anorganische und allgemeine Chemie)
    The ternary phase, Yb14CdSb11, has been synthesized by flux and polycrystalline methods. The crystal structure is determined via single-crystal X-ray diffraction, revealing that it crystallizes in the Ca14AlSb11 structure type (I41/acd space group with unit cell parameters of a = 16.5962(2) & Aring; and c = 22.1346(5) & Aring;, 90 K, Z = 8, R1 = 2.65%, and wR2 = 4.58%). The polycrystalline form of the compound is synthesized from a stoichiometric reaction of Yb4Sb3, CdSb, Yb, and Sb. The elemental composition is confirmed using scanning electron microscopy and energy-dispersive spectroscopy, and phase purity is verified by powder X-ray diffraction. Thermoelectric measurements, including resistivity, Seebeck coefficient, thermal conductivity, Hall carrier concentration, and Hall mobility, are conducted from 300 to 1273 K. Yb14CdSb11 exhibits a peak zT = 0.90 at 1200 K. Carrier concentration and Hall mobility range from 6.99 x 1020-1.01 x 1021 cm-3 and 4.45-9.35 x 10-1 cm2 V-1 s-1, respectively. This carrier concentration is lower than that reported for the Zn or Mn analogs leading to a lower thermoelectric figure of merit at high temperatures. However, with appropriate doping, this phase should also be a promising p-type candidate for high-temperature energy conversion applications. 
    more » « less
  3. ; ; ; ; ; (, Journal of Materials Chemistry C)
    The full-Heusler VFe 2 Al has emerged as an important thermoelectric material in its thin film and bulk phases. VFe 2 Al is attractive for use as a thermoelectric materials because of it contains only low-cost, non-toxic and earth abundant elements. While VFe 2 Al has often been described as a semimetal, here we show the electronic and thermal properties of VFe 2 Al can be explained by considering VFe 2 Al as a valence precise semiconductor like many other thermoelectric materials but with a very small band gap ( E g = 0.03 ± 0.01 eV). Using a two-band model for electrical transport and point-defect scattering model for thermal transport we analyze the thermoelectric properties of bulk full-Heusler VFe 2 Al. We demonstrate that a semiconductor transport model can explain the compilation of data from a variety of n and p-type VFe 2 Al compositions assuming a small band-gap between 0.02 eV and 0.04 eV. In this small E g semiconductor understanding, the model suggests that nominally undoped VFe 2 Al samples appear metallic because of intrinsic defects of the order of ∼10 20 defects per cm −3 . We rationalize the observed trends in weighted mobilities ( μ w ) with dopant atoms from a molecular orbital understanding of the electronic structure. We use a phonon-point-defect scattering model to understand the dopant-concentration (and, therefore, the carrier-concentration) dependence of thermal conductivity. The electrical and thermal models developed allow us to predict the zT versus carrier concentration curve for this material, which maps well to reported experimental investigations. 
    more » « less
  4. ; ; ; ; ; (, Advanced Materials Interfaces)
    Abstract Highly resistive grain boundaries significantly reduce the electrical conductivity that compromises the thermoelectric figure‐of‐meritzTin n‐type polycrystalline Mg3Sb2. In this work, discovered is a Mg deficiency near grain boundaries using atom‐probe tomography. Approximately 5 at% of Mg deficiency is observed uniformly in a 10 nm region along the grain boundary without any evidence of a stable secondary or impurity phase. The off‐stoichiometry can prevent n‐type dopants from providing electrons, lowering the local carrier concentration near the grain boundary and thus the local conductivity. This observation explains how nanometer scale compositional variations can dramatically determine thermoelectriczT, and provides concrete strategies to reduce grain‐boundary resistance and increasezTin Mg3Sb2‐based materials. 
    more » « less
  5. ; ; ; ; ; (, Advanced Materials)
    Abstract Engineering semiconductor devices requires an understanding of charge carrier mobility. Typically, mobilities are estimated using Hall effect and electrical resistivity meausrements, which are are routinely performed at room temperature and below, in materials with mobilities greater than 1 cm2V‐1s‐1. With the availability of combined Seebeck coefficient and electrical resistivity measurement systems, it is now easy to measure the weighted mobility (electron mobility weighted by the density of electronic states). A simple method to calculate the weighted mobility from Seebeck coefficient and electrical resistivity measurements is introduced, which gives good results at room temperature and above, and for mobilities as low as 10−3cm2V‐1s‐1,Here, μwis the weighted mobility, ρ is the electrical resistivity measured in mΩ cm,Tis the absolute temperature in K,Sis the Seebeck coefficient, andkB/e = 86.3 µV K–1. Weighted mobility analysis can elucidate the electronic structure and scattering mechanisms in materials and is particularly helpful in understanding and optimizing thermoelectric systems. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email