skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


  • NSF Public Access
  • Search Results
  • Enhancing Light Harvesting in Dye-Sensitized Solar Cells through Mesoporous Silica Nanoparticle-Mediated Diffuse Scattering Back Reflectors
Title: Enhancing Light Harvesting in Dye-Sensitized Solar Cells through Mesoporous Silica Nanoparticle-Mediated Diffuse Scattering Back Reflectors
Dye-sensitized solar cells (DSSCs) hold unique promise in solar photovoltaics owing to their low-cost fabrication and high efficiency in ambient conditions. However, to improve their commercial viability, effective, and low-cost methods must be employed to enhance their light harvesting capabilities, and hence photovoltaic (PV) performance. Improving the absorption of incoming light is a critical strategy for maximizing solar cell efficiency while overcoming material limitations. Mesoporous silica nanoparticles (MSNs) were employed herein as a reflective layer on the back of transparent counter electrodes. Chemically synthesized MSNs were applied to DSSCs via bar coating as a facile fabrication step compatible with roll-to-roll manufacturing. The MSNs diffusely scatter the unused incident light transmitted through the DSSCs back into the photoactive layers, increasing the absorption of light by N719 dye molecules. This resulted in a 20% increase in power conversion efficiency (PCE), from 5.57% in a standard cell to 6.68% with the addition of MSNs. The improved performance is attributed to an increase in photon absorption which led to the generation of a higher number of charge carriers, thus increasing the current density in DSSCs. These results were corroborated with electrochemical impedance spectroscopy (EIS), which showed improved charge transport kinetics. The use of MSNs as reflectors proved to be an effective practical method for enhancing the performance of thin film solar cells. Due to silica’s abundance and biocompatibility, MSNs are an attractive material for meeting the low-cost and non-toxic requirements for commercially viable integrated PVs.  more » « less
Award ID(s):
1924412
PAR ID:
10463351
Author(s) / Creator(s):
; ; ; ;
Date Published:
Journal Name:
Electronic Materials
Volume:
4
Issue:
3
ISSN:
2673-3978
Page Range / eLocation ID:
124 to 135
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; (, Molecular Systems Design & Engineering)
    null (Ed.)
    Dye-sensitized solar cells (DSCs) have drawn a significant interest due to their low production cost, design flexibility, and the tunability of the sensitizer. However, the power conversion efficiency (PCE) of the metal-free organic dyes is limited due to the inability of the dye to absorb light in the near-infrared (NIR) region, leaving a large amount of energy unused. Herein, we have designed new DSC dyes with open-shell character, which significantly red-shifts the absorption spectra from their counterpart closed-shell structure. A small diradical character ( y < 0.10) is found to be beneficial in red-shifting the absorption maxima into the NIR region and broadening up to 2500 nm. Also, the open-shell dyes significantly reduce the singlet–triplet energy gaps (Δ E ST ), increase the total amount of charge-transfer to the semiconductor surface, reduce the exciton binding energy, and significantly increase the excited-state lifetimes compared to the closed-shell systems. However, the closed-shell dyes have higher injection efficiency with increased intramolecular charge transfer (ICT) character. Our study reveals the design rule for open-shell DSC dyes to be able to absorb photons in the NIR region, which can increase the efficiency of the solar cell device. 
    more » « less
  2. ; ; (, Journal of Materials Chemistry A)
    An inexpensive, transparent, catalytic, and highly stable material is the holy grail for a dye sensitized solar cell (DSSC) cathode. Despite a near exponential increase in research effort on DSSC cathodes, materials approaching this ideal have yet to be found. Transparent cathodes allow for front and back illumination of the solar cell, enable alternative anode materials and cell designs, and are important both for fundamental research and commercialization of DSSCs. In this work, thin polymeric films of nickel tetraminophthalocyanine (NiTAPc) were tested as a catalytic cathode material in Co(Bipy)-mediated DSSCs. The thin films are highly transparent with a transmittance at 550 nm (T550) of over 95% while maintaining an R ct value below 1.3 Ω cm 2 . The NiTAPc films are inexpensive, fast and easy to generate, and stable to 2000 cyclic voltammetry cycles. Long-term film stability was not realized, and a rise in the R ct over time (days) occurred. However, poly-NiTAPc still represents one of the most transparent and catalytic materials reported to date. While historically phthalocyanines (Pc) have been studied as a dye/sensitizer, this first report of phthalocyanine use as a cathode material demonstrates they have utility on both sides of the DSSC. 
    more » « less
  3. ; ; ; (, Solar RRL)
    III–V‐based multijunction solar cells have become the leading power generation technology for space applications due to their high power conversion efficiency and reliable performance in extraterrestrial environments. Thinning down the absorber layers of multijunction solar cells can considerably reduce the production cost and improve their radiation hardness. Recent advances in ultrathin GaAs single‐junction solar cells suggest the development of light‐trapping nanostructures to increase light absorption in optically thin layers within III–V‐based multijunction solar cells. Herein, a novel and highly scalable nanosphere lithography‐assisted chemical etching method to fabricate light‐trapping nanostructures in InGaP/GaAs dual‐junction solar cells is studied. Numerical models show that integrating the nanostructured Al2O3/Ag rear mirror significantly enhances the broadband absorption within the GaAs bottom cell. Results demonstrate that the light‐trapping nanostructures effectively increase the short‐circuit current density in GaAs bottom cells from 14.04 to 15.06 mA cm−2. The simulated nanostructured InGaP/GaAs dual‐junction structure shows improved current matching between the GaAs bottom cell and the InGaP top cell, resulting in 1.12x higher power conversion efficiency. These findings highlight the potential of light‐trapping nanostructures to improve the performance of III‐V‐based multijunction photovoltaic systems, particularly for high‐efficiency applications in space. 
    more » « less
  4. ; ; (, 16th LACCEI International Multi-Conference for Engineering, Education, and Technology: “Innovation in Education and Inclusion”/2414-6390)
    Dye sensitized solar cells are a type of thin film solar cell used to convert sunlight into electrical energy. These devices use a different mechanism than conventional solar cells and can be made from materials which are biocompatible and biodegradable. The simplicity of design and small environmental impact of these devices make them a likely candidate for replacing conventional PV devices. Since these solar cells are thin film cells, they can be made to be transparent and can be printed on flexible substrate, allowing their incorporation into many household objects such as windows, backpacks, walls, and other objects which would otherwise not be used for energy generation. A wide variety of fabrication techniques and device designs exist for DSSCs, each having its benefits and deficiencies; it is the purpose of this paper to evaluate some of these design variations, including different semiconductor and dye types and scaffolds, as well as semiconductor surface treatment. 
    more » « less
  5. ; ; (, Global Partnerships for Development and Engineering Education: Proceedings of the 15th LACCEI International Multi-Conference for Engineering, Education and Technology)
    Dye sensitized solar cells are a type of thin film solar cell used to convert sunlight into electrical energy. These devices use a different mechanism than conventional solar cells and can be made from materials which are biocompatible and biodegradable. The simplicity of design and small environmental impact of these devices make them a likely candidate for replacing conventional PV devices. Since these solar cells are thin film cells, they can be made to be transparent and can be printed on flexible substrate, allowing their incorporation into many household objects such as windows, backpacks, walls, and other objects which would otherwise not be used for energy generation. A wide variety of fabrication techniques and device designs exist for DSSCs, each having its benefits and deficiencies; it is the purpose of this paper to evaluate some of these design variations, including different semiconductor and dye types and scaffolds, as well as semiconductor surface treatment using microwave plasma. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email