skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


  • NSF Public Access
  • Search Results
  • Improved synthesis and transient absorption spectroscopy of CuBiW 2 O 8 with demonstration of visible-light-driven photocatalysis and mechanistic insights
Title: Improved synthesis and transient absorption spectroscopy of CuBiW 2 O 8 with demonstration of visible-light-driven photocatalysis and mechanistic insights
CuBiW 2 O 8 (CBTO), with a band gap of 1.9–2.0 eV, responds to a wide region of the electromagnetic spectrum, which makes it a good candidate for solar-driven photocatalytic energy conversion and water treatment. We have previously demonstrated a Cu-rich solid state approach that enables the synthesis of CBTO accompanied by thermodynamically stable Bi 2 WO 6 impurity. Here, we describe an improved synthesis protocol with decreased impurity and synthesis time, and the first demonstration of CBTO as a functional material using photocatalytic Cr( vi ) photoreduction as a probe reaction. Transient absorption spectroscopy (TAS) was performed to investigate the ultrafast dynamics of the charge carriers after photoexcitation. The presence of two populations of photoexcited carriers was found, including short-lived free carriers with ∼10 ps lifetime and long-lived shallowly-trapped carriers with ∼1 ns lifetime. Together with carrier mobilities measured in our previous study, the new TAS results indicate that the long-lived charges have diffusion lengths similar to the CBTO particle size and were likely responsible for the majority of the photocatalytic activity. High activity of CBTO for Cr( vi ) photoreduction (∼100% reduction of 5 mg L −1 of Cr( vi ) in 15 minutes) was demonstrated, which clearly establishes the promise of this novel oxide for visible light-driven photocatalytic applications. Radical quenching experiments indicate that both ˙OH radicals and O 2 ˙ − radicals are produced by CBTO and are involved in the photoreduction of Cr( vi ). Repeated photocatalysis tests and analysis of the surface after the reaction show that CBTO is a stable and potentially reusable catalyst. Insights gained from correlating the synthesis conditions, carrier dynamics, and reactive species suggests that CBTO prepared with the improved protocol would be a favorable choice for photocatalytic reactions such as water decontamination from organic pollutants, water splitting, and solar fuel generation using visible light.  more » « less
Award ID(s):
2018326
PAR ID:
10466233
Author(s) / Creator(s):
; ; ; ; ; ; ; ;
Date Published:
Journal Name:
Journal of Materials Chemistry A
Volume:
10
Issue:
46
ISSN:
2050-7488
Page Range / eLocation ID:
24888 to 24895
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; (, Materials Horizons)
    Photocatalytic water splitting is a wireless method for solar-to-hydrogen conversion. To date, however, the efficiency of photocatalytic water splitting is still very low. Here, we have investigated the design, synthesis, and characterization of quadruple-band InGaN nanowire arrays, which consist of In 0.35 Ga 0.65 N, In 0.27 Ga 0.73 N, In 0.20 Ga 0.80 N, and GaN segments, with energy bandgaps of ∼2.1 eV, 2.4 eV, 2.6 eV, and 3.4 eV, respectively. Such multi-band InGaN nanowire arrays are integrated directly on a nonplanar wafer for enhanced light absorption. Moreover, a doping gradient is introduced along the lateral dimension of the nanowires, which forms a built-in electric field and promotes efficient charge carrier separation and extraction for water redox reactions. We have demonstrated that the quadruple-band InGaN nanowire photocatalyst can exhibit a solar-to-hydrogen efficiency of ∼5.2% with relatively stable operation. This work demonstrates a novel strategy using multi-band semiconductor nanostructures for artificial photosynthesis and solar fuel conversion with significantly improved performance. 
    more » « less
  2. ; ; ; (, Journal of Physics D: Applied Physics)
    Abstract This work focuses on the low frequency Drude response of bulk-insulating topological insulator (TI) Bi 2 Se 3 films. The frequency and field dependence of the mobility and carrier density are measured simultaneously via time-domain terahertz spectroscopy. These films are grown on buffer layers, capped by Se, and have been exposed in air for months. Under a magnetic field up to 7 Tesla, we observe prominent cyclotron resonances (CRs). We attribute the sharp CR to two different topological surface states from both surfaces of the films. The CR sharpens at high fields due to an electron-impurity scattering. By using magneto-terahertz spectroscopy, we confirm that these films are bulk-insulating, which paves the way to use intrinsic TIs without bulk carriers for applications including topological spintronics and quantum computing. 
    more » « less
  3. ; ; ; ; ; ; ; (, Advanced Functional Materials)
    Abstract A multifaceted Mo:BiVO4(mf‐BVO) photoanode is grown on F‐doped‐SnO2substrates via achemical bath deposition, and the crystal reconstruction process of mf‐BVO is found to boost the charge transport efficiency significantly for photoelectrochemical (PEC) water splitting. The mf‐BVO exhibits columnar grains with an uncommon (121) texture with high‐index facets such as (112), (020), (132), and (204). The texture and high‐index facets facilitate rapid surface melting and grain fusion during thermal annealing, thus leading to crystal reconstructed micron‐sized BVO grains (cr‐BVO). The cr‐BVO has a photocurrent density ≈50 times larger than that of mf‐BVO. The reason is identified as the significantly improved charge transport efficiency resulting from the dopant activation (increased carrier concentration) and bulky grains (fewer defects). Additionally, the cr‐BVO exhibits improved photocorrosion resistance compared to the nanoparticle‐based BVO. After coating the oxygen evolution catalyst, the photocurrent density of cr‐BVO is further increased to 4.4 mA cm−2for water oxidation reaction at 1.23 V versus the reversible hydrogen electrode, maintaining a high and stable faradaic efficiency of over 88% for 24 h. These results demonstrate that crystal reconstruction is a facile and effective pathway to improve the charge transport efficiency, opening a new avenue for developing efficient photoelectrodes for PEC water splitting. 
    more » « less
  4. ; ; ; ; (, Nanoscale)
    null (Ed.)
    This study presents a comprehensive investigation on the aerosol synthesis of a semiconducting double perovskite oxide with a nominal composition of KBaTeBiO 6 , which is considered as a potential candidate for CO 2 photoreduction. We demonstrate the rapid synthesis of the multispecies compounds KBaTeBiO 6 with extreme high purity and controllable size through a single-step furnace aerosol reactor (FuAR) process. The formation mechanism of the perovskite in the aerosol route is investigated using thermogravimetric analysis to identify the optimal reference temperature, residence time and other operational parameters in the FuAR synthesis process to obtain the highly pure KBaTeBiO 6 nanoparticles. It is observed that particle formation in the FuAR is based on a mixture of gas-to-particle and liquid-to-particle mechanisms. The phase purity of the perovskite nanoparticles depends on the ratio of the residence time and the reaction time. The particle size is strongly affected by the precursor concentration, residence time and the furnace temperature. Finally, the photocatalytic performance of the synthesized KBaTeBiO 6 nanoparticles is investigated for CO 2 photoreduction under UV-light. The best performing sample exhibits an average CO production rate of 180 μmol g −1 h −1 in the first half hour with a quantum efficiency of 1.19%, demonstrating KBaTeBiO 6 as a promising photocatalyst for CO 2 photoreduction. 
    more » « less
  5. ; ; ; ; (, Chemistry – A European Journal)
    Abstract Visible‐light‐driven C−C bond formation utilizing ketyl radical (Cketyl) species has attracted increasing attention recently, as it provides a direct route for the synthesis of complex molecules. However, the most‐developed homogeneous photocatalytic systems for the generation and utilization of ketyl radicals usually entail noble metal‐based (e. g., Ru and Ir) photosensitizers, which suffer from not only high cost but also potential degradation and hence pose challenges in product separation and purification. In contrast, readily accessible, inexpensive, and recyclable semiconductors represent a class of attractive and alternative photocatalysts but remain much less explored for photocatalytic ketyl radical initiated C−C bond formation. This work demonstrates that a wide range of industrially important chemicals, including substituted chromanes and tertiary alcohols, can be produced on ZnIn2S4under visible light irradiation through intramolecular cyclization (Cketyl−Csp2) and intermolecular cross‐coupling (Cketyl−Csp3) reactions, respectively, using ketyl radicals. A suite of experimental studies aided by computational investigation were carried out to shed light on the mechanistic insights of these two types of ketyl radical initiated C−C coupling reactions on ZnIn2S4. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email