An official website of the United States government
Abstract The marine tintinnid ciliate Amphorides quadrilineata is a feeding-current feeder, creating flows for particle encounter, capture and rejection. Individual-level behaviors were observed using high-speed, high-magnification digital imaging. Cells beat their cilia backward to swim forward, simultaneously generating a feeding current that brings in particles. These particles are then individually captured through localized ciliary reversals. When swimming backward, cells beat their cilia forward (=ciliary reversals involving the entire ring of cilia), actively rejecting unwanted particles. Cells achieve path-averaged speeds averaging 3–4 total lengths per second. Both micro-particle image velocimetry and computational fluid dynamics were employed to characterize the cell-scale flows. Forward swimming generates a feeding current, a saddle flow vector field in front of the cell, whereas backward swimming creates an inverse saddle flow vector field behind the cell; these ciliary flows facilitate particle encounter, capture and rejection. The model-tintinnid with a full-length lorica achieves an encounter rate Q ~29% higher than that without a lorica, albeit at a ~142% increase in mechanical power and a decrease in quasi-propulsive efficiency (~0.24 vs. ~ 0.38). It is also suggested that Q can be approximated by π(W/2 + l)2U, where W, l and U represent the lorica oral diameter, ciliary length and swimming speed, respectively.
more »
« less
Multiscale flow between the branches and polyps of gorgonians
ABSTRACT Gorgonians, including sea fans, are soft corals well known for their elaborate branching structure and how they sway in the ocean. This branching structure can modify environmental flows to be beneficial for feeding in a particular range of velocities and, presumably, for a particular size of prey. As water moves through the elaborate branches, it is slowed, and recirculation zones can form downstream of the colony. At the smaller scale, individual polyps that emerge from the branches expand their tentacles, further slowing the flow. At the smallest scale, the tentacles are covered in tiny pinnules where exchange occurs. In this paper, we quantified the gap to diameter ratios for various gorgonians at the scale of the branches, the polyp tentacles and the pinnules. We then used computational fluid dynamics to determine the flow patterns at all three levels of branching. We quantified the leakiness between the branches, tentacles and pinnules over the biologically relevant range of Reynolds numbers and gap-to-diameter ratios, and found that the branches and tentacles can act as either leaky rakes or solid plates depending upon these dimensionless parameters. The pinnules, in contrast, mostly impede the flow. Using an agent-based modeling framework, we quantified plankton capture as a function of the gap-to-diameter ratio of the branches and the Reynolds number. We found that the capture rate depends critically on both morphology and Reynolds number. The results of the study have implications for how gorgonians modify ambient flows for efficient feeding and exchange.
more »
« less
- PAR ID:
- 10471093
- Publisher / Repository:
- Company of Biologists
- Date Published:
- Journal Name:
- Journal of Experimental Biology
- Volume:
- 226
- Issue:
- 5
- ISSN:
- 0022-0949
- Subject(s) / Keyword(s):
- Gorgonians, computational fluid dynamics, feeding flows, sea fans
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Two new biomechanical challenges faced cetacean lungs compared to their terrestrial ancestors. First, hydrostatic pressures encountered during deep dives are sufficient to cause nearly full lung collapse, risking substantial barotrauma during surfacing if air is trapped in the fragile smaller airways. Second, rapid ventilation in large cetaceans requires correspondingly high ventilatory flow rates. In order to investigate how airway geometry evolved in response to these challenges, we characterized airway geometry from 12 species of cetaceans that vary in common dive depth and ventilatory behavior and a domestic pig using computed tomography. After segmenting the major airways, we generated centerline networks models for the larger airways and computed geometric parameters for each tree including mean branching angle, percent volume fraction, and Strahler branching, diameter, and length ratios. When airway geometry was regressed against ventilatory and diving parameters with phylogenetic least squares, neither average branching angle, percent volume fraction, Strahler length ratio or Strahler branching ratio significantly varied with common ventilatory mode or common diving depth. Higher Strahler diameter ratios were associated with slower ventilation and deeper diving depth, suggesting that cetacean lungs have responded to biomechanical pressures primarily with changes in airway diameter. High Strahler diameter ratios lungs in deeper diving species may help to facilitate more complete collapse of the delicate terminal airways by providing for a greater incompressible volume for air storage at depth. On the other hand, lungs with low Strahler diameter ratios would be better for fast ventilation because the gradual decrease in diameter moving distally should keep peripheral flow resistance low, maximizing ventilatory flow rates.more » « less
-
We propose a framework for developing wall models for large-eddy simulation that is able to capture pressure-gradient effects using multi-agent reinforcement learning. Within this framework, the distributed reinforcement learning agents receive off-wall environmental states, including pressure gradient and turbulence strain rate, ensuring adaptability to a wide range of flows characterized by pressure-gradient effects and separations. Based on these states, the agents determine an action to adjust the wall eddy viscosity and, consequently, the wall-shear stress. The model training is in situ with wall-modeled large-eddy simulation grid resolutions and does not rely on the instantaneous velocity fields from high-fidelity simulations. Throughout the training, the agents compute rewards from the relative error in the estimated wall-shear stress, which allows them to refine an optimal control policy that minimizes prediction errors. Employing this framework, wall models are trained for two distinct subgrid-scale models using low-Reynolds-number flow over periodic hills. These models are validated through simulations of flows over periodic hills at higher Reynolds numbers and flows over the Boeing Gaussian bump. The developed wall models successfully capture the acceleration and deceleration of wall-bounded turbulent flows under pressure gradients and outperform the equilibrium wall model in predicting skin friction.more » « less
-
null (Ed.)In this work, model closures of the multiphase Reynolds-averaged Navier–Stokes (RANS) equations are developed for homogeneous, fully developed gas–particle flows. To date, the majority of RANS closures are based on extensions of single-phase turbulence models, which fail to capture complex two-phase flow dynamics across dilute and dense regimes, especially when two-way coupling between the phases is important. In the present study, particles settle under gravity in an unbounded viscous fluid. At sufficient mass loadings, interphase momentum exchange between the phases results in the spontaneous generation of particle clusters that sustain velocity fluctuations in the fluid. Data generated from Eulerian–Lagrangian simulations are used in a sparse regression method for model closure that ensures form invariance. Particular attention is paid to modelling the unclosed terms unique to the multiphase RANS equations (drag production, drag exchange, pressure strain and viscous dissipation). A minimal set of tensors is presented that serve as the basis for modelling. It is found that sparse regression identifies compact, algebraic models that are accurate across flow conditions and robust to sparse training data.more » « less
-
Turbulent shear flows are abundant in geophysical and astrophysical systems and in engineering-technology applications. They are often riddled with large-scale secondary flows that drastically modify the characteristics of the primary stream, preventing or enhancing mixing, mass and heat transfer. Using experiments and numerical simulations, we study the possibility of modifying these secondary flows by using superhydrophobic surface treatments that reduce the local shear. We focus on the canonical problem of Taylor–Couette flow, the flow between two coaxial and independently rotating cylinders, which has robust secondary structures called Taylor rolls that persist even at significant levels of turbulence. We generate these structures by rotating only the inner cylinder of the system, and show that an axially spaced superhydrophobic treatment can weaken the rolls through a mismatching surface heterogeneity, as long as the roll size can be fixed. The minimum hydrophobicity of the treatment required for this flow control is rationalized, and its effectiveness beyond the Reynolds numbers studied here is also discussed.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1242/jeb.244520
