Fire-prone landscapes found throughout the world are increasingly managed with prescribed fire for a variety of objectives. These frequent low-intensity fires directly impact lower forest strata, and thus estimating surface fuels or understory vegetation is essential for planning, evaluating, and monitoring management strategies and studying fire behavior and effects. Traditional fuel estimation methods can be applied to stand-level and canopy fuel loading; however, local-scale understory biomass remains challenging because of complex within-stand heterogeneity and fast recovery post-fire. Previous studies have demonstrated how single location terrestrial laser scanning (TLS) can be used to estimate plot-level vegetation characteristics and the impacts of prescribed fire. To build upon this methodology, co-located single TLS scans and physical biomass measurements were used to generate linear models for predicting understory vegetation and fuel biomass, as well as consumption by fire in a southeastern U.S. pineland. A variable selection method was used to select the six most important TLS-derived structural metrics for each linear model, where the model fit ranged in R2 from 0.61 to 0.74. This study highlights prospects for efficiently estimating vegetation and fuel characteristics that are relevant to prescribed burning via the integration of a single-scan TLS method that is adaptable by managers and relevant for coupled fire–atmosphere models.
Terrestrial laser scanning (TLS) data can offer a means to estimate subcanopy fuel characteristics to support site characterization, quantification of treatment or fire effects, and inform fire modeling. Using field and TLS data within the New Jersey Pinelands National Reserve (PNR), this study explores the impact of forest phenology and density of shrub height (i.e., shrub fuel bed depth) measurements on estimating average shrub heights at the plot-level using multiple linear regression and metrics derived from ground-classified and normalized point clouds. The results highlight the importance of shrub height sampling density when these data are used to train empirical models and characterize plot-level characteristics. We document larger prediction intervals (PIs), higher root mean square error (RMSE), and lower R-squared with reduction in the number of randomly selected field reference samples available within each plot. At least 10 random shrub heights collected in situ were needed to produce accurate and precise predictions, while 20 samples were ideal. Additionally, metrics derived from leaf-on TLS data generally provided more accurate and precise predictions than those calculated from leaf-off data within the study plots and landscape. This study highlights the importance of reference data sampling density and design and data characteristics when data will be used to train empirical models for extrapolation to new sites or plots.
more » « less- Award ID(s):
- 2134904
- PAR ID:
- 10472978
- Publisher / Repository:
- Fire
- Date Published:
- Journal Name:
- Fire
- Volume:
- 6
- Issue:
- 3
- ISSN:
- 2571-6255
- Page Range / eLocation ID:
- 98
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
more » « less
-
This data was primarily collected to assess forest quality within the Minneapolis-St. Paul (MSP) Metropolitan Area and to link above-ground and below-ground properties as part of the goals of the MSP-LTER Urban Tree Canopy research group. Here, we sampled vegetation on 40 circular plots with a 12.5 m radius distributed across 13 parks, registering the date of sampling, park and management agency names, the plot number, and geolocation (latitude, longitude, and elevation). The plots were randomly selected based on GEDI (Global Ecosystem Dynamics Investigation instrument) 2021 footprints in the MSP Metropolitan Area along accessible forested areas inside public parks, where the management agency allowed sampling. In each plot, we measured forest structure and diversity metrics, species names and abundance, DBH, height, distance from the plot center, the height where each individual canopy starts, and the relative position, exposure, and density of each canopy. We also measured understory plant structure and diversity in 4 subplots per plot, totaling 160 subplots. In these subplots, we surveyed all individual plants with heights over 20 cm, recording species names and abundance, plant basal diameter, plant height, and the total number of branches. Furthermore, we assessed the canopy openness above each subplot by calculating percent DIFN (diffuse non-interceptance) from fish eye pictures of the canopy at 1.3 m over the subplot.more » « less
-
Abstract Background and Aims Terrestrial laser scanners (TLSs) have successfully captured various properties of individual trees and have potential to further increase the quality and efficiency of forest surveys. However, TLSs are limited to line of sight observations, and forests are complex structural environments that can occlude TLS beams and thereby cause incomplete TLS samples. We evaluate the prevalence and sources of occlusion that limit line of sight to forest stems for TLS scans, assess the impacts of TLS sample incompleteness, and evaluate sampling strategies and data analysis techniques aimed at improving sample quality and representativeness. Methods We use a large number of TLS scans (761), taken across a 255 650-m2 area of forest with detailed field survey data: the Harvard Forest Global Earth Observatory (ForestGEO) (MA, USA). Sets of TLS returns are matched to stem positions in the field surveys to derive TLS-observed stem sets, which are compared with two additional stem sets derived solely from the field survey data: a set of stems within a fixed range from the TLS and a set of stems based on 2-D modelling of line of sight. Stem counts and densities are compared between the stem sets, and four alternative derivations of area to correct stem densities for the effects of occlusion are evaluated. Representation of diameter at breast height and species, drawn from the field survey data, are also compared between the stem sets. Key Results Occlusion from non-stem sources was the major influence on TLS line of sight. Transect and point TLS samples demonstrated better representativeness of some stem properties than did plots. Deriving sampled area from TLS scans improved estimates of stem density. Conclusions TLS sampling efforts should consider alternative sampling strategies and move towards in-progress assessment of sample quality and dynamic adaptation of sampling.more » « less
-
Williamson, Grant (Ed.)more » « less
Terrestrial LiDAR scans (TLS) offer a rich data source for high-fidelity vegetation characterization, addressing the limitations of traditional fuel sampling methods by capturing spatially explicit distributions that have a significant impact on fire behavior. However, large volumes of complex, high resolution data are difficult to use directly in wildland fire models. In this study, we introduce a novel method that employs a voxelization technique to convert high-resolution TLS data into fine-grained reference voxels, which are subsequently aggregated into lower-fidelity fuel cells for integration into physics-based fire models. This methodology aims to transform the complexity of TLS data into a format amenable for integration into wildland fire models, while retaining essential information about the spatial distribution of vegetation. We evaluate our approach by comparing a range of aggregate geometries in simulated burns to laboratory measurements. The results show insensitivity to fuel cell geometry at fine resolutions (2–8 cm), but we observe deviations in model behavior at the coarsest resolutions considered (16 cm). Our findings highlight the importance of capturing the fine scale spatial continuity present in heterogeneous tree canopies in order to accurately simulate fire behavior in coupled fire-atmosphere models. To the best of our knowledge, this is the first study to examine the use of TLS data to inform fuel inputs to a physics based model at a laboratory scale.
-
In 2003, the U.S. Fish and Wildlife Service conducted a prescribed burn over a large part of the northeastern corner of the Sevilleta National Wildlife Refuge. Following this burn, a study was designed to look at the effect of fire on above-ground net primary productivity (ANPP) (i.e., the change in plant biomass, represented by stems, flowers, fruit and foliage, over time) within three different vegetation types: mixed grass (MG), mixed shrub (MS) and black grama (G). Forty permanent 1m x 1m plots were installed in both burned and unburned (i.e., control) sections of each habitat type. The core black grama site included in SEV129 is used as a G control site for analyses and does not appear in this dataset. The MG control site caught fire unexpectedly in the fall of 2009 and some plots were subsequently moved to the south. For details of how the fire affected plot placement, see Methods below. In spring 2010, sampling of plots 16-25 was discontinued at the MG (burned and control) and G (burned treatment only) sites, reducing the number of sampled plots to 30 at each.To measure ANPP (i.e., the change in plant biomass, represented by stems, flowers, fruit and foliage, over time), the vegetation variables in this dataset, including species composition and the cover and height of individuals, are sampled twice yearly (spring and fall) at each plot. The data from these plots is used to build regressions correlating biomass and volume via weights of select harvested species obtained in SEV157, "Net Primary Productivity (NPP) Weight Data." This biomass data is included in SEV185, "Burn Study Sites Seasonal Biomass and Seasonal and Annual NPP Data."more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.3390/fire6030098
