An official website of the United States government
Abstract Monitoring brine leakage from CO2geological storages (CGS) is necessary to protect shallow aquifers against contamination. A framework for designing CGS monitoring systems that optimally use both easily available shallow zone data and hard‐to‐obtain deep zone observations is developed and validated. This framework is based on calibrating a transport model using monitoring data to determine leakage source conditions and then predict the subsequent brine plume that potentially contaminates shallow aquifers. As cost considerations are expected to limit monitoring deep formations, the framework is developed to minimize the number of deep observation points (e.g., deep sensors). The best monitoring locations that yield the most worthful data for reducing predictive uncertainty is selected by integrating linear uncertainty analysis with Genetic Algorithm under this framework. Due to practical challenges, testing such a framework in the field is not feasible. Thus, the framework was tested in an intermediate‐scale soil tank, where monitoring data on brine leakage plume development from the storage zone to the shallow aquifer were collected. Predictions made by a transport model calibrated on these data were then compared with experimental measurements to evaluate data informativity and thus validate the framework's applicability. The results demonstrate the framework ability to select the optimum monitoring locations for leakage detection and model calibration. It was also found that not only deep observations, but also shallow zone data are worthful to determine source conditions. Moreover, the results showed the possibility of identifying the likely areas to be impacted in the shallow aquifer using early stage monitoring data.
more »
« less
Identifying the source settings of deep brine leakage from CO2 geological repositories using observations from shallow overlying formations
Shallow groundwater resources overlaying deep saline formations used in carbon storage applications are subjected to a potential contamination threat by CO2/brine leakage via natural or anthropogenically-induced conductive pathways in the confining caprock. Identifying the leakage source location and rate is critical for developing remediation plans and designing corrective actions. Owing to limited information about the flow and transport characteristics of deep regimes and high cost of obtaining data on their response to CO2 injection operation, estimating accurate source settings (i.e., location and rate) can be extremely challenging. Under such conditions, Bayesian inverse frameworks become useful tools to help identify potential leakage patterns. This study tests and validates an ensemble-based data-assimilation approach that reduces the uncertainty in the prior knowledge about source settings through conditioning forward transport models using relatively inexpensive easy-to-acquire shallow zone data. The approach incorporates the newly developed ensemble smoother tool in the inversion code “PEST++” with the transport code “FEFLOW” to perform history matching and uncertainty analysis. A novel parameterization method that allows the disposition of potential source was used to search the leakage location during calibration process. In the absence of field data, the approach was validated using experimental data generated in ~8 m long soil tank simulating leakage from storage zone migrating to the shallow aquifer. The results show that source location uncertainty can be reasonably reduced using shallow zone data collected from near-surface aquifers. However, more prior information about the system and deeper data are essential to estimate a practical probability range for the leakage rate.
more »
« less
- Award ID(s):
- 1702060
- PAR ID:
- 10473039
- Publisher / Repository:
- Advances in Water Resources
- Date Published:
- Journal Name:
- Advances in Water Resources
- Volume:
- 179
- Issue:
- C
- ISSN:
- 0309-1708
- Page Range / eLocation ID:
- 104505
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract Natural fissures/faults or pressure‐induced fractures in the caprock confining injected CO2have been identified as a potential leakage pathways of far‐field native brine contaminating underground sources of drinking water. Developing models to simulate brine propagation through the overlaying formations and aquifers is essential to conduct reliable pre‐ and post‐risk assessments for site selection and operation, respectively. One of the primary challenges of performing such simulations is lack of adequate information about source conditions, such as hydro‐structural properties of caprock fracture/fault zone and the permeability field of the storage formation. This research investigates the impact of source condition uncertainties on the accuracy of leaking brine plume predictions. Prediction models should be able to simulate brine leakage and transport in complex multilayered geologic systems with interacting regional natural and leakage flows. As field datasets are not readily available for model testing and validation, three comprehensive intermediate‐scale laboratory experiments were used to generate high‐resolution spatiotemporal data on brine plume development under different leakage scenarios. Experimental data were used to validate a flow and transport model developed using existing code FEFLOW to simulate brine plume under varying source conditions. Spatial moment analysis was conducted to evaluate how uncertainty in source conditions impacts brine migration predictions. Results showed that inaccurately prescribing the permeability field of storage formation and caprock fractures in models can cause errors in leakage pathway and spread predictions up to ∼19% and ∼100%, respectively. These findings will help in selecting and characterizing storage sites by factoring in potential risks to shallow groundwater resources.more » « less
-
In the carbon dioxide capture and storage (CCS) process, pipeline infrastructure may be used to redirect carbon dioxide (CO2) flows from leaking geologic CO2 storage reservoirs to those with storage integrity. We developed and implemented an approach that combined results from the Leakage Risk Monetization Model (LRiMM) that monetizes leakage risk from individual reservoirs with the Scalable infrastructure Model for CO2 capture and storage (SimCCS) to determine the optimal deployment of integrated capture-transport-storage systems that are robust to leakage. We demonstrate this approach using a case study of 27 known coal-fired power plants in the U.S. state of Michigan and 42 potential CO2 storage locations in the Michigan Sedimentary Basin. We compare three cases of leakage risk: (1) as a base case, reservoir leakage risk was not considered, (2) first-of-a-kind leakage risk, which does not consider the reduction in risk from re-directing CO2 from leaking reservoirs, and (3) nth-of-a-kind risk that considers this reduction in risk. The results highlight the selection of reservoirs that quantitatively considers leakage risk, geospatial differences in infrastructure deployment that considers leakage risk, and the nominal increase in costs and total pipeline lengths for these systems.more » « less
-
Active sensing through the use of Adaptive Depth Sensors is a nascent field, with potential in areas such as Advanced driver-assistance systems (ADAS). They do however require dynamically driving a laser / light-source to a specific location to capture information, with one such class of sensor being the Triangulation Light Curtains (LC). In this work, we introduce a novel approach that exploits prior depth distributions from RGB cameras to drive a Light Curtain’s laser line to regions of uncertainty to get new measurements. These measurements are utilized such that depth uncertainty is reduced and errors get corrected recursively. We show real-world experiments that validate our approach in outdoor and driving settings, and demonstrate qualitative and quantitative improvements in depth RMSE when RGB cameras are used in tandem with a Light Curtain.more » « less
-
SUMMARY Applications of machine learning in seismology have greatly improved our capability of detecting earthquakes in large seismic data archives. Most of these efforts have been focused on continental shallow earthquakes, but here we introduce an integrated deep-learning-based workflow to detect deep earthquakes recorded by a temporary array of ocean-bottom seismographs (OBSs) and land-based stations in the Tonga subduction zone. We develop a new phase picker, PhaseNet-TF, to detect and pick P- and S-wave arrivals in the time–frequency domain. The frequency-domain information is critical for analysing OBS data, particularly the horizontal components, because they are contaminated by signals of ocean-bottom currents and other noise sources in certain frequency bands. PhaseNet-TF shows a much better performance in picking S waves at OBSs and land stations compared to its predecessor PhaseNet. The predicted phases are associated using an improved Gaussian Mixture Model Associator GaMMA-1D and then relocated with a double-difference package teletomoDD. We further enhance the model performance with a semi-supervised learning approach by iteratively refining labelled data and retraining PhaseNet-TF. This approach effectively suppresses false picks and significantly improves the detection of small earthquakes. The new catalogue of Tonga deep earthquakes contains more than 10 times more events compared to the reference catalogue that was analysed manually. This deep-learning-enhanced catalogue reveals Tonga seismicity in unprecedented detail, and better defines the lateral extent of the double-seismic zone at intermediate depths and the location of four large deep-focus earthquakes relative to background seismicity. It also offers new potential for deciphering deep earthquake mechanisms, refining tomographic models, and understanding of subduction processes.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1016/j.advwatres.2023.104505
