skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.


Title: Observations of Mantle Seismic Anisotropy Using Array Techniques: Shear‐Wave Splitting of Beamformed SmKS Phases
Abstract Shear‐wave splitting measurements are commonly used to resolve seismic anisotropy in both the upper and lowermost mantle. Typically, such techniques are applied to SmKS phases that have reflected (m‐1) times off the underside of the core‐mantle boundary before being recorded. Practical constraints for shear‐wave splitting studies include the limited number of suitable phases as well as the large fraction of available data discarded because of poor signal‐to‐noise ratios (SNRs) or large measurement uncertainties. Array techniques such as beamforming are commonly used in observational seismology to enhance SNRs, but have not been applied before to improve SmKS signal strength and coherency for shear wave splitting studies. Here, we investigate how a beamforming methodology, based on slowness and backazimuth vespagrams to determine the most coherent incoming wave direction, can improve shear‐wave splitting measurement confidence intervals. Through the analysis of real and synthetic seismograms, we show that (a) the splitting measurements obtained from the beamformed seismograms (beams) reflect an average of the single‐station splitting parameters that contribute to the beam; (b) the beams have (on average) more than twice as large SNRs than the single‐station seismograms that contribute to the beam; (c) the increased SNRs allow the reliable measurement of shear wave splitting parameters from beams down to average single‐station SNRs of 1.3. Beamforming may thus be helpful to more reliably measure splitting due to upper mantle anisotropy. Moreover, we show that beamforming holds potential to greatly improve detection of lowermost mantle anisotropy by demonstrating differential SKS–SKKS splitting analysis using beamformed USArray data.  more » « less
Award ID(s):
2026931
PAR ID:
10475632
Author(s) / Creator(s):
; ; ; ; ; ;
Publisher / Repository:
Journal of Geophysical Research - Solid Earth
Date Published:
Journal Name:
Journal of Geophysical Research: Solid Earth
Volume:
128
Issue:
1
ISSN:
2169-9313
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. Shear-wave splitting measurements are commonly used to resolve seismic anisotropy in both the upper and lowermost mantle. Typically, such techniques are applied to SmKS phases that have reflected (m-1) times off the underside of the core-mantle boundary before being recorded. Practical constraints for shear-wave splitting studies include the limited number of suitable phases as well as the large fraction of available data discarded because of poor signal-to-noise ratios (SNRs) or large measurement uncertainties. Array techniques such as beamforming are commonly used in observational seismology to enhance SNRs, but have not been applied before to improve SmKS signal strength and coherency for shear wave splitting studies. Here, we investigate how a beamforming methodology, based on slowness and backazimuth vespagrams to determine the most coherent incoming wave direction, can improve shear-wave splitting measurement confidence intervals. Through the analysis of real and synthetic seismograms, we show that (a) the splitting measurements obtained from the beamformed seismograms (beams) reflect an average of the single-station splitting parameters that contribute to the beam; (b) the beams have (on average) more than twice as large SNRs than the single-station seismograms that contribute to the beam; (c) the increased SNRs allow the reliable measurement of shear wave splitting parameters from beams down to average single-station SNRs of 1.3. Beamforming may thus be helpful to more reliably measure splitting due to upper mantle anisotropy. Moreover, we show that beamforming holds potential to greatly improve detection of lowermost mantle anisotropy by demonstrating differential SKS– SKKS splitting analysis using beamformed USArray data. 
    more » « less
  2. Abstract Observations of seismic waves that have passed through the Earth's lowermost mantle provide insight into deep mantle structure and dynamics, often on relatively small spatial scales. Here we use SKS, S2KS, S3KS, and PKS signals recorded across a large region including the United States, Mexico, and Central America to study the deepest mantle beneath large swaths of North America and the northeastern Pacific Ocean. These phases are enhanced via beamforming and then used to investigate polarization‐ and propagation direction‐dependent shear wave speeds (seismic anisotropy). A differential splitting approach enables us to robustly identify contributions from anisotropy. Our results show strong seismic anisotropy in approximately half of our study region, indicating that anisotropy may be more prevalent than commonly thought. In some regions, the anisotropy may be induced by flow driven by sinking cold slabs, and in other, more compact regions, by upwelling flow. Measured splitting due to lowermost mantle anisotropy is sufficiently strong to be non‐negligible in interpretations of SKS splitting due to upper mantle anisotropy in certain regions, which may prompt future re‐evaluations of upper mantle anisotropy beneath North and Central America. 
    more » « less
  3. Abstract We compile and make publicly available a global digital database of body wave observations of seismic anisotropy in the D′′ layer, grouped using the method used to analyze deep mantle anisotropy. Using this database, we examine the global distribution of seismic anisotropy in the D′′ layer, evaluating the question of whether seismic anisotropy is more likely to be located at the edges of the two large‐low velocity provinces (LLVPs) in Earth's mantle than elsewhere. We show that this hypothesis lacks statistical justification if we consider previously observed lowermost mantle anisotropy, although there are multiple factors that are difficult to account for quantitatively. One such factor is the global lowermost mantle ray coverage for different phases that are commonly used to detect deep mantle anisotropy in shear wave splitting studies. We find that the global ray coverage of the relevant seismic phases is highly uneven, with LLVP edges and their interiors less well‐sampled than the global average. 
    more » « less
  4. We compile and make publicly available a global digital database of body wave observations of seismic anisotropy in the D′′ layer, grouped using the method used to analyze deep mantle anisotropy. Using this database, we examine the global distribution of seismic anisotropy in the D′′ layer, evaluating the question of whether seismic anisotropy is more likely to be located at the edges of the two large-low velocity provinces (LLVPs) in Earth's mantle than elsewhere. We show that this hypothesis lacks statistical justification if we consider previously observed lowermost mantle anisotropy, although there are multiple factors that are difficult to account for quantitatively. One such factor is the global lowermost mantle ray coverage for different phases that are commonly used to detect deep mantle anisotropy in shear wave splitting studies. We find that the global ray coverage of the relevant seismic phases is highly uneven, with LLVP edges and their interiors less well-sampled than the global average. 
    more » « less
  5. Many regions of the Earth's mantle are seismically anisotropic, including portions of the lowermost mantle, which may indicate deformation due to convective flow. The splitting of ScS phases, which reflect once off the core-mantle boundary (CMB), is commonly measured to identify lowermost mantle anisotropy, although some challenges exist. Here, we use global wavefield simulations to evaluate commonly used approaches to inferring a lowermost mantle contribution to ScS splitting. We show that due to effects of the CMB reflection, only the epicentral distance range between 60° and 70° is appropriate for ScS splitting measurements. For this distance range, splitting is diagnostic of deep mantle anisotropy if no upper mantle anisotropy is present; however, if ScS is also split due to upper mantle anisotropy, the reliable diagnosis of deep mantle anisotropy is challenging. Moreover, even in the case of a homogeneously anisotropic deep mantle region sampled from a single azimuth by multiple ScS waves with different source polarizations (in absence of upper mantle anisotropy), different apparent fast directions are produced. We suggest that ScS splitting should only be measured at null stations and conduct such an analysis worldwide. Our results indicate that seismic anisotropy is globally widespread in the deep mantle. 
    more » « less