An official website of the United States government
This research investigates the dynamic response of a novel polyurea foam with different densities by separately submitting samples to single and multiple impacts at different energies ranging from 1.77 to 7.09 J. The impact and transmitted force‐time histories are acquired during the impact events. Deformation of the samples is also recorded using high‐speed photography and analyzed using digital image correlation (DIC) to characterize density‐dependent strain rate and Poisson's ratio. The analyses of the force‐time histories highlight the interrelationship between the incoming impact energy and force characteristics, including amplitude and durations. The experimental results reveal that polyurea foams can absorb nearly 50% of the incoming impact energy irrespective of their density. The dynamic impact efficacy of the foam persists even after sequential impact events are imparted on the same samples, with only a 20% drop in the load‐bearing capacity after seven consecutive impacts. Furthermore, as verified via electron microscopy observations, the higher‐density foam does not exhibit any permanent damage. This high‐density polyurea foam shows reversible auxetic transition at all impact energies considered herein. The outcomes of this research indicate the suitability of polyurea foams for cushioning and impact mitigation applications, especially in repeated biomechanical impact scenarios.
more »
« less
Full‐Field Analyses of Density‐Graded Elastomeric Foams Under Quasistatic and Impact Loadings
Density‐graded elastomeric foams are emerging as effective protective structures to guard humans against mechanical loading. This research investigates the deformation of ungraded and graded foams under quasistatic and impact scenarios using digital image correlation (DIC). The graded samples are assembled using two interfacing strategies (seamless and adhered), leveraging the adhesiveness of the foam slurry and bulk polyurea, respectively. Deformation mechanisms, including the effect of the interface type on strain transduction and localization in density‐graded structures, are imperative for improving the impact efficacy of protective paddings. Cuboid foam plugs are subjected to quasistatic and impact loading while recording the corresponding deformation for DIC analysis. The DIC results are separated into three case studies based on the number of layers (1, 2, and 3). The interface effect on the overall mechanical performance of polyurea foam is revealed from the bilayer, monodensity samples, showing drastic differences between the deformations within each layer. Seamless interface samples exhibit greater compliance than their adhered counterparts in the bilayer density‐graded configurations. Trilayer‐graded foams broaden strain–time history, extend the impact duration, and reduce strains. This research substantiates the importance of interfacing and gradation strategies on the mechanical response of elastomeric foams as a function of strain rate.
more »
« less
- Award ID(s):
- 2035660
- PAR ID:
- 10481840
- Publisher / Repository:
- Wiley Blackwell (John Wiley & Sons)
- Date Published:
- Journal Name:
- Advanced Engineering Materials
- Volume:
- 25
- Issue:
- 24
- ISSN:
- 1438-1656
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract The core of this research is separated into three domains, the ultrahigh strain rate response of elastomeric polymers, laser‐induced shock waves , and terahertz time‐domain spectroscopy (THz‐TDS). Elastomers, e.g., polyurea, constitute an advance class of materials suitable for many applications, specifically in high impact loading scenarios, thus, a laser‐induced shock wave (LSW) experimental technique is used to investigate the mechanical response of shock‐loaded polyurea. LSW can submit samples to a strain rate exceeding 106s−1at low strains, enabling determination of material intrinsic failure modes. The large deformation induced during shock loading may alter the macromolecule structure, which can only be detected spectroscopically. Therefore, this research incorporated terahertz bulk spectroscopy to detect and report molecular conformational changes. Microscopy techniques were also used to elucidate changes in the microscale properties, morphology, and topography. The interpretation of the results explicated brittle failure in terms of partial and total spallation and, remarkably, ductile failure leading to plastic deformation, including plastic bulging and adiabatic shearing, not previously associated with LSW technique. Furthermore, spectral changes found in the terahertz regime substantiated the validity of terahertz spectroscopy in elucidating the underlying mechanism associated with the impact mitigating properties of dynamically loaded polyurea.more » « less
-
null (Ed.)This paper reports the unique microstructure of polyurea foams that combines the advantages of open and closed cell polymeric foams, which were synthesized through a self-foaming process. The latter was the result of aggressive mechanical mixing of diamine curative, isocyanate, and deionized water at ambient conditions, which can be adjusted on-demand to produce variable density polyurea foam. The spherical, semi-closed microcellular structure has large perforations on the cell surface resulting from the concurrent expansion of neighboring cells and small holes at the bottom surface of the cells. This resulted in a partially perforated microcellular structure of polyurea foam. As a byproduct of the manufacturing process, polyurea microspheres nucleate and deposit on the inner cell walls of the foam, acting as a reinforcement. Since cell walls and the microspheres are made of polyurea, the resulting reinforcement effect overcomes the fundamental interfacial issue of different adjacent materials. The partially perforated, self-reinforced polyurea foam is compared to the performance of traditional counterparts in biomechanical impact scenarios. An analytical model was developed to explicate the stiffening effect associated with the reinforcing microspheres. The model results indicate that the reinforced microcell exhibited, on average, ~30% higher stiffness than its barren counterpart.more » « less
-
Midsoles are important components in footwear as they provide shock absorption and stability, thereby improving comfort and effectively preventing certain foot injuries. A strategically engineered midsole designed to mitigate plantar pressure can enhance athletic performance and comfort levels. Despite the importance of midsole design, the potential of using in-plane density gradation (deliberate variation of material density across the horizontal plane) in midsoles has been rarely explored. The present work investigated the effectiveness of in-plane density gradation in shoe midsoles using novel polyurea foams as the material candidate. Different polyurea foam densities, ranging from 95 to 350 kg/m2were examined and tested to construct density-dependent correlative mathematical relations required for optimizing the midsole design for enhanced cushioning and reduced weight. This study combined mechanical testing and plantar pressure measurements to validate the efficacy of density-graded midsoles. The methodology introduced here is relevant to realistic walking conditions, ensured by biomechanical tests supplemented by digital image correlation analyses. An optimization framework was then created to allocate foam densities at certain plantar zones based on the required cushioning performance constrained by the local pressure. The optimization algorithm was specifically tailored to accommodate varying local pressures experienced by different areas of the foot. The optimization strategy in this study aimed at reducing the overall weight of the midsole while ensuring there were no compromises in cushioning efficacy or distribution of plantar pressure. The approach presented herein has the potential to be applied to a wide range of gait speeds and user-specific plantar pressure patterns.more » « less
-
null (Ed.)Abstract Emerging polymeric foams exhibiting unique microstructure of microspherical shells with reinforcing dense microspheres creates a new opportunity for impact-tolerant foam paddings in sport gears applications. This paper describes the static response of reinforced microcell consisting of an outer spherical shell and uniformly distributed microspheres while quantifying the stiffening effect. The distribution of the microspheres is illustrated using the Fourier series, allowing tuning of the reinforcing strategy. Expressions of the external and internal works are derived, whereas the Ritz energy method is adopted to calculate the deformations due to a compressive load distributed over a range of areas. Emphasis is given to the effect of the geometrical attributes of the microcell and the reinforcing microspheres on the resulting deformation response and stiffening effect. The framework is used to investigate the response of several case studies to elucidate the effects of relative radii ratio, reinforcement density, microcell wall thickness, and loading configurations on the stiffness. A new normalized strain energy parameter is introduced to simplify and accelerate the analysis while providing insights on the underpinnings of the observed buckling response. The results strongly suggest the viability of the newly discovered foam microstructure in managing static loads while providing an opportunity to strategically tune the mechanical response using the analytical framework presented herein.more » « less
