skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


  • NSF Public Access
  • Search Results
  • Effect of pressure quenching on the structures and properties of borosilicate glasses: Insights from molecular dynamics simulations
Title: Effect of pressure quenching on the structures and properties of borosilicate glasses: Insights from molecular dynamics simulations
Combining thermal and pressure effect represents a novel approach to modify glass properties. However, the microscopic structural origin of these property modifications is complex and far from fully understood, especially in multicomponent glasses with mixed glass formers. In this paper, we have utilized classical molecular dynamics simulations with a set of composition dependent potentials to investigate pressure-quenching effect on sodium borosilicate glasses. Processes including hot compression, cold compression and subsequent annealing on the structures and properties are investigated and compared. It was found that applying pressure up to 10 GPa at the glass transition temperature led to permanent densifications and a dramatic increase of elastic moduli by 90%, while thermal annealing reversed the increase and applying pressure at ambient temperture did not increase the modulus. The main structural change of the hot compressed sample is the increase of four-fold coordinated boron while silicon remains four-fold coordinated. The sodium environment shows an increase of coordination number and a decrease of Nasingle bondO and Nasingle bondNa bond distances. Medium range structure is also changed with an increase of 8-membered rings. These results provide atomistic insights of the pressure quench effect on borosilicate glasses.  more » « less
Award ID(s):
1662288
PAR ID:
10483256
Author(s) / Creator(s):
;
Publisher / Repository:
Elesvier
Date Published:
Journal Name:
Journal of Non-Crystalline Solids: X
Volume:
15
Issue:
C
ISSN:
2590-1591
Page Range / eLocation ID:
100112
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; (, Journal of the American Ceramic Society)
    Abstract Iron oxide is commonly found in natural or industrial glass compositions and can exist as ferrous (Fe2+) or ferric (Fe3+) species, with their ratios depending on glass composition, temperature, pressure and the redox reactions during the glass forming process. The iron redox ratio plays an important role on silicate glass structures and consequently various properties. This work aims to study the effect of iron oxide, and particularly the iron redox ratio, on the structures of borosilicate and boroaluminosilicate glasses using molecular dynamics simulations with newly developed iron potential parameters that are compatible with the borosilicate potentials. The results provide detailed cation coordination states of both iron species and the effect of redox ratio on boron coordination and other structural features. Particularly, competition for charge compensating modifier cations (such as Na+) among the fourfold‐coordinated cations such as B3+, Al3+, and Fe3+is investigated by calculating the cation–cation pair distribution functions and coordination preferential ratios. The results show that the trivalent ferric ions, with a shorter Fe–O bond distance and better defined first coordiation shell with mainly four‐fold coordination, act as a glass former whereas the divalent ferrous ions mainly play the role of glass modifier. The ferrous/ferric ratio (Fe2+/Fe3+) was found to affect the glass chemistry and hence glass properties by regulating the amount of four‐coordinated boron, the fraction of non‐briding oxygen and other features. The results are compared with available experimental data to gain insights of the complex structures and charge compensation schemes of the glass system. 
    more » « less
  2. ; ; ; (, Journal of Non-Crystalline Solids)
    The addition of V2O5 has been long known to increase the sulfur (as SO42-) solubility in borosilicate glasses. However, the mechanism governing this effect is still unknown. Although several studies have been published in the past two decades attempting to decipher the structural origins of increasing sulfur solubility as a function of V2O5 in borosilicate glasses, most of these studies remain inconclusive. The work presented in this paper attempts to answer the question, “Why does V2O5 increase sulfur solubility in borosilicate glasses?” Accordingly, a series of melt-quenched glasses in the system [30 Na2O – 5 Al2O3 – 15 B2O3 –50 SiO2](100-x) – xV2O5, where x varies between 0 – 9 mol.%, have been characterized for their short-to-intermediate range structure and the redox chemistry of vanadium using 11B, 27Al, 51V MAS NMR, Raman, and XPS spectroscopy. The impact of V2O5 on sulfur solubility in glasses has been followed by ICP-OES. The addition of ≤ 5 mol.% V2O5 results in a linear increase in sulfur solubility in the investigated glass system. Based on the results, we hypothesize that adding vanadium to the glasses increases their network connectivity, but reduces the network rigidity by replacing stronger Si–O–Si linkages with weaker Si–O–V linkages and forming (VO3)n-single chains. These modifications to the glass structure increase the flexibility of the network, thus making it possible to accommodate SO42− in their voids/open spaces. 
    more » « less
  3. ; ; ; ; (, Journal of Non-Crystalline Solids)
    Yttrium aluminosilicate glasses with 25–78 mol% silica were studied using molecular dynamics simulations to understand their structural and property changes. The results show that Al3+ ions primarily exist as four-fold coordinated, with <5% in higher-coordinated states that increase with decreasing silica content. The formation of significant concentrations (4–9%) of oxygen tri-clusters and small amounts of free oxygen were also observed, suggesting a perturbed glass network structure. An average Y-O bond distance of 2.26 Å and Y coordination number of 6.3 were found. The glass transition temperatures are relatively insensitive to composition, agreeing with experiments. A 16% and 30% increase in Young's and bulk moduli, respectively, was observed with decreasing silica contents which was explained by the strong Y-O bond and formation of oxygen tri-clusters that aggregate higher coordinated Al species. These results were discussed in the context of optical and acoustic properties of YAS optical fibers that exhibit reduced nonlinearities. 
    more » « less
  4. ; ; ; ; (, Physical Chemistry Chemical Physics)
    Understanding the corrosion behavior of glasses in near-neutral environments is crucial for many technologies including glasses for regenerative medicine and nuclear waste immobilization. To maintain consistent pH values throughout experiments in the pH = 7 to 9 regime, buffer solutions containing tris(hydroxymethyl)aminomethane (“Tris”, or sometimes called THAM) are recommended in ISO standards 10993-14 and 23317 for evaluating biomaterial degradation and utilized throughout glass dissolution behavior literature—a key advantage being the absence of dissolved alkali/alkaline earth cations ( i.e. Na + or Ca 2+ ) that can convolute experimental results due to solution feedback effects. Although Tris is effective at maintaining the solution pH, it has presented concerns due to the adverse artificial effects it produces while studying glass corrosion, especially in borosilicate glasses. Therefore, many open questions still remain on the topic of borosilicate glass interaction with Tris-based solutions. We have approached this topic by studying the dissolution behavior of a sodium borosilicate glass in a wide range of Tris-based solutions at 65 °C with varied acid identity (Tris–HCl vs. Tris–HNO 3 ), buffer concentration (0.01 M to 0.5 M), and pH (7–9). The results have been discussed in reference to previous studies on this topic and the following conclusions have been made: (i) acid identity in Tris-based solutions does not exhibit a significant impact on the dissolution behavior of borosilicate glasses, (ii) ∼0.1 M Tris-based solutions are ideal for maintaining solution pH in the absence of obvious undesirable solution chemistry effects, and (iii) Tris–boron complexes can form in solution as a result of glass dissolution processes. The complex formation, however, exhibits a distinct temperature-dependence, and requires further study to uncover the precise mechanisms by which Tris-based solutions impact borosilicate glass dissolution behavior. 
    more » « less
  5. ; ; (, Applied Physics Letters)
    Clock transitions (CTs) in spin systems, which occur at avoided level crossings, enhance quantum coherence lifetimes T2 because the transition becomes immune to the decohering effects of magnetic field fluctuations to first order. We present the first electron-spin resonance characterization of CTs in certain defect-rich silica glasses, noting coherence times up to 16 μs at the CTs. We find CT behavior at zero magnetic field in borosilicate and aluminosilicate glasses, but not in a variety of silica glasses lacking boron or aluminum. Annealing reduces or eliminates the zero-field signal. Since boron and aluminum have the same valence and are acceptors when substituted for silicon, we suggest the observed CT behavior could be generated by a spin-1 boron vacancy center within the borosilicate glass, and similarly, an aluminum vacancy center in the aluminosilicate glass. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email